Sidebar
$379.00

FallTech 7533 13" Trailing Beam Clamp Anchor
(No reviews yet)
Write a Review
Write a Review
×
FallTech
FallTech 7533 13" Trailing Beam Clamp Anchor
Size Chart
- Brand
- FallTech
- SKU:
- F7533
Dual Adjustment for Centering on I-beam; Aluminum Hex Bar and Jaws.
- Aluminum alloy construction of hex bar and jaws
- Lightweight design delivers demanding performance
- Both Jaws center onto beam flange keeping steel D-ring on-center
- Lock-nut jaws provide nearly infinite Adjustment
- Rated to 5,000 lbs
0 Reviews Hide Reviews Show Reviews
FallTech 7530 14" Trailing Beam Clamp Anchor
$319.00
Dual Ratcheting for Centering on I-beam; Fits 4" to 14" Flange Width; Machined Aluminum Bar; Steel Jaws with Slider Pads.
Nylon slider pads on jaws provide worker with trailing mobility
Alloy...
FallTech 7531 13" Trailing Beam Clamp Anchor
$329.00
Single Ratcheting; Fits 4" to 12" Flange Width; Machined Aluminum Bar; Steel Jaws with Slider Pads.
Nylon slider pads on jaws provide worker with trailing mobility
Alloy steel jaws deliver...
FallTech 7534 18" Trailing Beam Clamp Anchor
$399.00
Dual Adjustment for Centering on I-beam; Aluminum Hex Bar and Jaws.
Aluminum alloy construction of hex bar and jaws
Lightweight design delivers demanding performance
Both Jaws center onto beam...
FallTech 7535 12" Stationary Beam Clamp Anchor
$399.00
Vertical or Horizontal Mount; Aluminum Hex Bar and Jaws; Fits 4" to 12" Flange Width; Can be used for FallTech Temporary HLLs; 8,000 lbs Capacity.
Heavy-duty aluminum alloy construction
Ideally...
FallTech 7536 25" Stationary Beam Clamp Anchor
$399.00
Vertical or Horizontal Mount; Aluminum Hex Bar and Jaws; Fits 9" to 25" Flange Width; Can be used for FallTech Temporary HLLs; 8,000 lbs Capacity.
Heavy-duty aluminum alloy construction
Ideally...
FallTech 7535 12" Stationary Beam Clamp Anchor
$399.00
Vertical or Horizontal Mount; Aluminum Hex Bar and Jaws; Fits 4" to 12" Flange Width; Can be used for FallTech Temporary HLLs; 8,000 lbs Capacity.
Heavy-duty aluminum alloy construction
Ideally...
FallTech 7534 18" Trailing Beam Clamp Anchor
$399.00
Dual Adjustment for Centering on I-beam; Aluminum Hex Bar and Jaws.
Aluminum alloy construction of hex bar and jaws
Lightweight design delivers demanding performance
Both Jaws center onto beam...
FallTech 8240 Elastech Internal Elastic, Expands 4.5' to 6', Single leg w/ 2 Steel Snap Hooks
$119.00
Adjustable Single Leg; with 2 Snap Hooks
Heavy duty tubular polyester outer jacket web resists abrasion and UV
Internal high modulus elastic won't soften from frequent use
Forged steel or...
FallTech 7530 14" Trailing Beam Clamp Anchor
$319.00
Dual Ratcheting for Centering on I-beam; Fits 4" to 14" Flange Width; Machined Aluminum Bar; Steel Jaws with Slider Pads.
Nylon slider pads on jaws provide worker with trailing mobility
Alloy...
FallTech 7531 13" Trailing Beam Clamp Anchor
$329.00
Single Ratcheting; Fits 4" to 12" Flange Width; Machined Aluminum Bar; Steel Jaws with Slider Pads.
Nylon slider pads on jaws provide worker with trailing mobility
Alloy steel jaws deliver...
FallTech 7017 Contractor Harness, Non-Belted, 3 D-rings - 1 Back and 2 Sides, Available in 4 Sizes
$99.00 - $103.00
3 D-rings, Back and Side; Mating Buckle Legs and Chest.
5 points of adjustment (chest, legs and torso)
Torso keeper for stowing idle lanyard connector
Paired mating buckle adjusters on front...