How To Use A Roof Safety Harness - The Ultimate Guide
You need to make sure that you keep yourself as safe as possible whenever you climb on top of a roof. That is why you need to use a safety roofing harness. A roof harness system is incredibly important, but it will only work well if you use it properly. You need to make sure you understand how your specific harness works, how to tell when it is getting worn down, and what other equipment you need to use if you want to get the most out of your harness. Take a look at some of the most important points you need to keep in mind if you want to stay safe when you use a roofing harness.
Get the Harness Ready
The first thing you need to do is to get the harness ready. You need to take a look at the harness to make sure it appears exactly as it should. Make sure it hasn't been damaged, and keep in mind that if a safety harness has been through a fall, it needs to be removed from service. You should also check the fit of the harness to make sure it supports your bodyweight adequately. Take a look at the harness and make sure it is snug around both of your legs. It should also be relatively snug around your chest. You don't want it to restrict your breathing, but you don't want to be able to fall through the harness if it gets caught on something. Remember that the right harness for you is not necessarily the same as the right harness for somebody else.
Check the Fall Distance
You also need to check the fall distance of the safety harness. This is the minimum vertical distance between the metal ring on the back of the harness and the lower level (or the ground). Essentially, what this means is that if you slip and fall, the harness needs to stop you from hitting the ground. If the harness has so much slack that you will hit the ground before it arrests the fall, it will not help you. For example, if you are working on the second story, you probably want the minimum fall distance to be about six feet. Anything more than this and you run the risk of hitting the ground if you slip and fall. This is a critical part of how to use a safety harness on a roof.
Install the Anchor Point
Next, you need to install the anchor point of your safety harness. Typically, the anchors are labeled with a manufacturer's recommendations. You need to take a look at the instructions and make sure you understand how to use the nail or the screw that acts as your roof anchor. You should install the anchor in the correct place, and make sure not to skip any steps. Anchors can vary significantly depending on whether you are using a nail or screw and where you are installing it on the roof. If the anchor doesn't work, the safety harness may not function properly.
Connect the Safety Harness to the Anchor Point
Finally, you need to connect the safety harness to the anchor point. The exact method of how you will do this depends on the type of system you're using, but typically, you will attach the lifeline to the anchor. Always take a look at the harness and make sure it will attach securely to the anchor point. Once the safety harness is installed, make sure you grab onto the harness quickly to ensure the anchor point does not come loose from the roof. As you go throughout your project, make sure you stay relatively close to the anchor point. Even though it should support you, you do not want to test the anchor point more than necessary. Keep the system taut to avoid any pendulum effect if you slip and fall.
Count on Fall Protection Distributors for All of Your Safety Harness Needs
You need to make sure that you protect yourself during all of your roofing projects, and that is why you need to have a reliable safety harness as well. You should make sure that you familiarize yourself with your safety harness and your anchor point before you get started. If you have questions about how to use your safety harness, you may want to reach out to a professional who can assist you.
If you are looking for the right safety harness, you need to count on the team from Fall Protection Distributors. We are proud to be one of the leaders and roofing safety, and it would be our pleasure to help you find the right safety harness to meet your needs as well. Contact us today to speak to a member of our team!