Temporary Use roof anchor that can be installed onto a flat surface and onto pitched roofs. Anchor legs are pre-bent to 25-degrees. Adjust the anchor by hand to match the roof pitch. Installs with 10 16d vinyl sinkers through the sheathing and into a top chord. Maximum exposure time is 6 months from install date. Evacuate by removing or by flattening the anchor stem over.
Fall Arrest Rated for 5,000 pounds
14 gauge zinc plated steel
Attached with 10 ea. 16d vinyl coated nails
Adjustable Pitch Legs Bend Easily with Hand
Comprehensive Instruction/Specification Manual
Technical Specifications
Device
FormIt Anchor for 1 person use, disposable anchor
Fall Protection Rating
Fall Arrest and Fall Restraint
Roof Slope
Adjustable to lay flat or any pitch/slope. Preset at 25-degrees
Temporary Use roof anchor that can be installed onto a flat surface and onto pitched roofs. Anchor legs are pre-bent to 25-degrees. Adjust the anchor by hand to match the roof pitch. Installs with 10...
This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail...
Our #1 selling anchor for reroof, new construction and remodeling. The low-profile design is aesthetically pleasing and is designed to last the life of the structure. The RetroFit is designed to give...
D-Minus Anchor
The D-Minus is our most economical fall arrest anchor and is available in a powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied...
The Super Bolt Temporary anchor is a concrete anchorage device for inserting into concrete structure. Drill a ¾” hole into the concrete, clean and insert the Super Bolt. Can be used on horizontal,...
The industry standard in permanent anchorage devices, the ARS Series anchor has been providing fall protection for the residential and commercial building industry for over 25 years. They are...
The Malta Dynamics A6300 – Roof Anchor 12″ Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested (see testing and...
D-Minus Anchor
The D-Minus is our most economical fall arrest anchor and is available in a powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied...
This Pre-Engineered permanent flat/low-slope roof anchor is specified for use as a single user fall protection anchor point, a window-washing suspension/tie-back anchor point or as a horizontal...
Malta Dynamics 6’ Single Leg External Shock Absorbing Lanyard with 2 Steel Snap Hooks meets all the stringent ANSI Z359.13-2009 regulations and is 100% ISO 17025 third party tested (per...
