Extender Series Web Loop Lanyards are designed with a snaphook or carabiner connector that attaches to a full body harness dorsal (rear) D-Ring or side D-Ring. The opposite end is specified for attachment to a rope grab, SRL, Tie-Off Strap or as an extension of another lanyard with an SAS factory supplied connector or a user supplied connector. Extenders are static and do not have energy absorbing properties. Several models provide connector options based on the user’s preference. Service length varies by model from 17” – 22”. Manufactured by Super Anchor Safety at our Monroe, WA factory.
- Light Weight Models Fitted with Aluminum Carabiners
- 2” x 10,000 pound tensile strength polyester webbing
- PVC and Webbing Wear Pads
- Ideal Length for Rope Grab Positioning at the Users Hip
- English/Spanish Instruction Specification & Instruction Manuals
- Elastic Webbing Label Keeper
- ANSI Z359 3,600-pound Gate Strength Connectors
- Complied with ANSI Z359.1-07 and OSHA 1926:502
| Technical Specifications | |
|---|---|
| Device | Dorsal D-ring Extension Lanyard |
| Fall Protection Rating | Work Positioning or Fall Arrest with the use of Energy Absorber |
| Minimum Tensile Strength | 10,000 pounds |
| Material – Webbing | Polyester Webbing 2.0″ |
| Material – D-ring | Small slotted zinc plated 3,600 proof load |
| Service Length | Approximately 18″ |
| Connector Compliance | ANSI Z359.12-2009, CSA Z259.12-11 3,600-pound gate strength |
| Maximum User Weight | 340 pounds |
| OSHA Standard | 1926:502 |
| ANSI Standard | Z359.1-07 |
