Malta X1000 Mobile Grabber: Road-Towable Manual-Hydraulic Overhead Anchor for 2 Workers
The Malta Dynamics X1000 is a road-towable mobile fall protection system that delivers two overhead anchor points for work at height, with no fixed building anchor and no ground penetration. A manual hand-pump hydraulic system raises the mast from 17 ft to 22 ft, outrigger jacks level the base on uneven ground, and the trailer tows at posted highway speed to the next jobsite. It is the value-priced, no-power alternative to the electric X1000E.
Two workers, a hand-pump hydraulic mast that adjusts from 17 ft to 22 ft, and a road-towable trailer that deploys in minutes.
$Configure Your X1000: Instant Quote
Build your X1000 below and see your price update instantly. All prices are FOB Malta, OH. Delivery is available and is quoted separately once you share a delivery address.
Base unit, road-towable trailer, manual-hydraulic dual overhead anchor, up to 2 workers. FOB Malta, OH.
Adds bi-directional winching and a 3-Way Recovery SRL so an attendant can raise or lower a worker, satisfying the OSHA confined space rescue and retrieval requirement.
Puncture-proof solid tires for rough sites with hot metal or debris. Not rated for highway use.
Two standardized studs for jobsites that require the unit to be electrically grounded.
Oversized studded outrigger feet for secure traction when the unit is set up on snow or ice.
A mounted fire extinguisher as a first line of defense against jobsite fire hazards.
Big-foot tough-steel pads that spread the load on soft ground for a more stable setup, installed in seconds.
A certified instructor trains your crew on towing, setup, mast deployment, tie-off, and inspection at your site. Flat rate anywhere in the continental US, instructor travel included.
This is a quote-request item. Build your configuration above, then request your quote, and our team will confirm pricing and lead time. Payment is made by ACH or wire transfer. If delivery is required, provide a ship-to address, and we will quote truck freight, typically ranging from $1,500 to over $10,000, depending on the unit, distance, and current fuel costs. Sales tax is calculated based on your delivery location unless a valid resale certificate is on file.
Who Needs the X1000
The X1000 is built for two-worker overhead tie-off on dynamic jobsites where permanent anchorage is not available and a power source is not guaranteed: trailer and railcar loading, aircraft and heavy equipment maintenance, and high-ceiling facility work. Because the base is free-standing and stabilized by outrigger jacks, there is no drilling, no roof penetration, and no building attachment. The manual hand-pump mast raises from 17 ft to 22 ft, and the road-towable trailer relocates at posted highway speed when the job moves.
Watch: Malta X1000 in ActionSee how the X1000 tows to the jobsite, levels on its outrigger jacks, and raises its manual-hydraulic mast to two overhead anchor points.
Features
Manual hydraulic hand pump
Raise and lower the mast with a reliable manual hand-pump hydraulic system, the value-priced alternative to the electric X1000E.
Road-towable trailer
Tow at posted highway speed between jobsites, then deploy in minutes without a power source.
Two overhead anchor points
Tie-off points rated to 310 lbs each support up to two workers at once for fall arrest or fall restraint.
17 ft to 22 ft working height
An adjustable mast sets the overhead anchor between 17 ft and 22 ft to clear trailers, rail cars, and large equipment.
Outrigger jacks
Manually adjustable jacks level and stabilize the base on uneven ground, with no drilling or ballast required.
USA-made and tested
Built in a USA-based ISO 9001 certified facility and tested to meet and exceed OSHA anchorage requirements.
Tow only within the rated speed, set up on stable, level ground, and extend the outrigger jacks before raising the mast or tying off. Confirm the unit is level, complete a daily visual inspection of the trailer, mast, jacks, and anchor points, and pair the X1000 with a compatible self-retracting lifeline; SRLs are not included with the unit.
Typical Applications
Trailer and railcar loading
Overhead tie-off for two workers on top of trailers, tankers, and rail cars during loading and unloading.
Aircraft and heavy equipment
Position dual overhead anchors above aircraft or large machinery for maintenance and inspection.
High-ceiling facilities
Mobile overhead anchorage for service work where fixed roof or wall anchors are not available.
Remote and changing jobsites
Tow the unit between sites and deploy quickly with the manual-pump mast and outrigger jacks.
Technical Specifications
| Product | Malta Dynamics XSeries X1000 Mobile Grabber |
|---|---|
| SKU | X1000 |
| Maximum working height | 22 ft (6.7 m) |
| Minimum working height | 17 ft (5.18 m) |
| Maximum folded height | 7 ft 10 in (2.38 m) |
| Frame width | 5 ft 8 in (1.73 m) |
| Overall length | 12 ft 9 in (3.89 m), with tongue removed |
| Maximum anchor point capacity | 310 lbs |
| Maximum allowable users | 2 |
| Actuating method | Manual hydraulic system, hand pump |
| Hydraulic fluid | Mobil DT10 Excel 22 |
| Towing | Posted highway speed |
| Outrigger system | Manually adjustable outrigger jacks |
| Unit weight | Approximately 2,200 lbs |
| Self-retracting lifeline | Not included; pair with a compatible SRL |
| Compliance | OSHA fall arrest anchorage; tested in accordance with the ISO 17025 protocol; Declaration of Conformity |
| Origin | Made in the USA, ISO 9001 certified facility |
| Warranty | 1 year limited plus 5 year structural warranty (Malta Dynamics) |
Tested and Compliant Anchorage
The X1000 is documented to meet OSHA fall-arrest anchorage requirements, supported by a Malta Dynamics Declaration of Conformity, with testing performed in accordance with the ISO 17025 protocol. Each unit is manufactured in a USA-based ISO 9001-certified facility. Download the spec sheet, declaration of conformity, instruction manual, working diameter charts, and annual inspection form below, and keep the inspection form on file as part of your documented fleet maintenance program.
Product Documents and Submittals
X1000 Spec Sheet (PDF)Dimensions, working height range, capacity, and weight ratings.X1000 Declaration of Conformity (PDF)OSHA compliance and ISO 17025 testing statement.X1000 Instruction Manual (PDF)Towing, setup, mast deployment, and safe use.MX1000 XSeries Working Diameter Charts (PDF)Anchor reach and working diameter reference.MX1000 XSeries Annual Inspection Form (PDF)Documented inspection record for fleet maintenance.MX1000 XSeries Brochure (PDF)Full XSeries mobile grabber lineup and add-on options.Frequently Asked Questions
Compare the Malta X-Series Mobile Grabbers
The X1000 is the manual-hydraulic, two-worker road-towable grabber. For effortless electric-remote deployment see the X1000E, or compare the rest of the Malta XSeries mobile grabber line.
Ready to Configure Your X1000?
Build your unit in the instant quote tool above, add the rescue kit, solid tires, or on-site training, then request a delivered quote, and our team will price freight to your address. Road-towable overhead protection, made in the USA.
