Ridge Pro Anchor System
The Ridge Pro and 50' lifeline bundle allows workers to anchor to most roofs and maintain 100% tie-off while on the roof. Experience enhanced safety and efficiency with the Ridge Pro Anchor and 50' vertical lifeline bundle. Roofing professionals, including contractors, solar installers, insurance adjusters, holiday light installers, chimney sweeps, telecommunications installers, and gutter installers, use the Ridge Pro for fast and secure anchoring on most roof types.
This innovative "first man up" roof anchoring system covers roof pitches from 6/12 to 12/12. The Ridge Pro system simplifies access compared to traditional methods by offering a secure, quick, and adaptable solution with its lightweight, durable aluminum body and stainless steel rope shackle. Compliant with OSHA and ANSI testing protocols for single-user anchorage, it supports static strengths exceeding 5,000 lbs., ensuring maximum safety on the roof.
Stop using dangerous chicken ladders!
See how the Ridge Pro creates a 5,000-lb certified safety system in minutes.
Added Bonus: Malta Dynamics Vertical Lifeline
Included in this bundle is the Malta Dynamics C7050 50' vertical lifeline with shock-absorbing lanyard and rope grab. It offers reliable fall protection, enhancing the overall safety and efficiency of roofing operations. The rope grab allows workers to stay tethered to the lifeline at various distances away from the anchor point. The shock-absorbing lanyard effectively reduces impact loads on the worker during a fall.
Setting Up the Ridge Pro Anchor: Pole Preparation:
- Acquire a Pole: Purchase a Wooster Sherlock R057 (8'-16') extension pole locally. Remove the screws holding the threaded tip and drill holes with a 1/4" bit to accommodate the clevis pin.
- Attaching the Anchor: Slide the Ridge Pro post inside the drilled pole and secure it using the provided clevis pin.
- Anchoring on Roof: Position the Ridge Pro over the roof peak. Secure it using four 5/16" x 1-1/2" lag bolts (sold separately) through the pre-drilled holes in its cross members. Ensure it's anchored firmly to withstand impact loads.
- Lifeline Attachment: Attach the lifeline to the Ridge Pro unit. Use the rope grab for controlled ascent and descent, adjusting it to maintain safety while moving across the roof.
- Post-Use: Upon completing the work, remove the bolts and seal the holes with weatherproof roofing sealant to prevent any potential leaks or damage.
Ridge Pro Peak Anchor Hook and Rope Bundle Frequently Asked Questions
Is this bundle a complete OSHA-compliant safety solution?
This bundle provides the necessary Anchorage (Ridge Pro) and Connector (Lifeline) for a Personal Fall Arrest System (PFAS). To be fully compliant, workers must also wear an OSHA-approved full-body harness. When the Ridge Pro is fastened with lag bolts, it meets all OSHA 1926 Subpart M standards.
Does this specific kit include a safety harness?
No. This kit includes the Ridge Pro Anchor and the Malta Dynamics 50' Vertical Lifeline assembly only. If you require a harness, please see our Ridge Pro Hook, Rope, and Harness Bundle.
Does the unboxing video above show the vertical lifeline?
The technical overview video focuses on the Ridge Pro device and the different available bundles that we offer. This SKU adds the Malta C7050 vertical lifeline, which features an integrated rope grab and shock-absorbing lanyard for a ready-to-use safety setup.
Can I use this safety bundle on a metal roof?
Absolutely. The Ridge Pro features a padded base specifically designed to protect painted metal finishes and asphalt shingles from scratches while in use.
What is the benefit of the included Malta C7050 lifeline?
The C7050 is a 50-foot assembly that includes a rope grab and a shock-absorbing lanyard. This allows for smooth movement along the roof while ensuring that fall forces are minimized if a slip occurs.
Do I need to buy anything else to start working?
You will need an OSHA-compliant full-body harness, a Wooster Sherlock extension pole, and four 5/16" lag bolts. Watch the video below for a guide on how to prep your locally purchased pole for the Ridge Pro:
How do I avoid common problems when setting up this system?
- 1. Check Rope Grab Direction: Always ensure the arrow on the rope grab is pointing UP toward the Ridge Pro anchor.
- 2. Rafter Alignment: Ensure your lag bolts are hitting the roof rafters to achieve the maximum 5,000-lb pull-out strength.
- 3. Proper Storage: Keep your lifeline in a cool, dry place to prevent fiber degradation from moisture or UV exposure.
