Super Anchor 2815-T Tile-Retro Anchor for Permanent Fall Protection on Tile Roofs
The Super Anchor 2815-T Tile-Retro Anchor provides an innovative and reliable fall protection solution for high- and low-profile tile roofs. With a 35-inch length, this double D-ring anchor allows the D-rings to remain exposed just below the last course of tiles, ensuring easy accessibility while maintaining a clean, low-profile design. The unique construction eliminates the need for conventional flashing systems, as the anchor is installed with eight spiral shank stainless steel nails and incorporates a butyl flashing strip for a water-resistant seal. For shingle roofing systems, consider the Super Anchor 2815 Shingle-Retro Anchor as an alternative.
Safety Features of the Super Anchor 2815-T Tile-Retro Anchor
The Tile-Retro Anchor is crafted with 20-gauge 430 stainless steel strapping, paired with stamped Dacromet or zinc-plated steel D-rings, to deliver exceptional strength and longevity. It complies fully with OSHA 1926:502 and ANSI Z359.18 Type D standards and Canadian certification by L’Ordre des Ingenieurs du Quebec, ensuring rigorous safety compliance. This paintable anchor integrates seamlessly with standard or vented ridge-cap systems.
Installation Options for the Super Anchor 2815-T Tile-Retro Anchor
The Super Anchor 2815-T Tile-Retro Anchor is perfect for new and retrofit applications for low- and high-profile tile and slate roofs. Installation is straightforward and secure, requiring only eight spiral shank stainless steel nails to attach it firmly to wood structures without penetrating the sheathing. For versatility, temporary installation options include hex head or bugle head screws. The design supports fall arrest when used at a 0-30 degree load angle and fall restraint at angles above 30 degrees, making it adaptable for varied roofing scenarios.
Performance and Durability of the Super Anchor 2815-T Tile-Retro Anchor
With a minimum breaking and tensile strength of 5,000 pounds, the Super Anchor 2815-T Tile-Retro Anchor ensures reliable fall protection performance for workers up to 310 pounds, including tools and equipment. The butyl flashing strip provides a dependable waterproof seal, and the low-profile design prevents interference with the roof’s visual appeal. It’s a favorite among architects and contractors who appreciate its balance of safety, durability, and aesthetics.
Technical Specifications for the Super Anchor 2815-T Tile-Retro Anchor
- Device Type: Double D-ring permanent roof anchor
- Fall Protection Rating: Fall arrest (0-30 degrees) and fall restraint (30+ degrees)
- Material – Strapping: 20-gauge 430 stainless steel
- Material – D-Rings: Stamped Dacromet or zinc-plated steel
- Flashing: Butyl flashing strip for waterproofing (2 @ 4”)
- Breaking/Tensile Strength: 5,000 pounds minimum
- Maximum User Weight: 310 pounds, including tools and equipment
- Hardware: Includes 3-1/4” stainless steel nails
- Compliance: OSHA 1926:502, ANSI Z359.18 Type D, Canadian certification
Helpful Resources for the Super Anchor 2815-T Tile-Retro Anchor:
Equip your crew with the Super Anchor 2815-T Tile-Retro Anchor for dependable fall protection that pairs seamlessly with the unique needs of tile roofing systems. Its thoughtful design ensures safety, water resistance, and aesthetic integration, setting a new standard for permanent roof anchors.
