The 7/8″ Precast Concrete Toggle Lok Anchor 5K (Part #A6004) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector for fall protection. These precast concrete lifting anchors are easy to install, just compress its spring and insert the cable shaft into the hole, and can be inserted inside precast concrete and steel flanges. This concrete anchor is designed for use in 12-inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.
Key Features:
● Meets ANSI Z359.1-2007, ANSI A10.32-12 and CE-EN 795 ● Compliant with OSHA 1926.502 and OSHA 1910.66 ● Size: 7/8” ● Weight: 0.6-lbs ● Breaking Strength: 5,000 lbf / 22kn
Non-penetrating design to eliminate parapet wall damage
No Installation tools required- Dual tightening handles for even force distribution
Rubber protective pads to eliminate damage to the...
The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated...
Specifically designed for permanent use on wood rooftops, these roof safety anchors are manufactured with two alloy D-ring ends, is 18″ long and composed of stainless steel for an exceptionally long...
The Malta Dynamics Threaded Top 12″ Roof Anchor is a fixed post roof top safety anchor, intended for permanent applications only. The A6305 has been thoroughly tested (see testing and compliance...
The Malta Dynamics Threaded Top 18″ Roof Anchor is a fixed post rooftop anchor, intended for permanent applications only. The A6306 has been thoroughly tested (see testing and compliance page on...
The Malta Dynamics A6301 – Roof Anchor 18″ Standard is a fixed post roof top anchor, intended for permanent applications only. The A6301 has been thoroughly tested (see testing and compliance...
The 1″ Removable Concrete Anchor 10K is designed for use in 10-inch thick, cured concrete with a compression strength of at least 3000 p.s.i. This reusable concrete anchor is easy to...
Description
The 3/4″ Precast Concrete Toggle Lok Anchor 5K (Part #A6005) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage...
Description
The 3/4″ Removable Concrete Anchor 5K (Part # A6002) is designed for use in 12-inch thick cured concrete with a compression strength of at least 3000 p.s.i...
Description
The I-Beam Trolley Anchor (Part # A6101) is an anchor designed to be used in combination with either a lanyard or an SRL to form a complete I-Beamtrolley...
Description
Malta Dynamics Vertical/Fixed Beam Anchors (Part #A6105) are designed for fall protection, rope access, and work positioning. This beam anchor is constructed with...
Description
The Malta Dynamics 5K Swivel Anchor is used in our Grabber Mobile Fall Arrest System and connects to the top of an RA12. This particular anchor rotates 360...