The 3/4″ Precast Concrete Toggle Lok Anchor 5K (Part #A6005) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector for fall protection. These precast concrete lifting anchors are easy to install, just compress its spring and insert the cable shaft into the hole, and can be inserted inside precast concrete and steel flanges. This concrete anchor is designed for use in 12-inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.
Key Features:
● Meets ANSI Z359.1-2007, ANSI A10.32-12 and CE-EN 795 ● Compliant with OSHA 1926.502 and OSHA 1910.66 ● Size: 3/4” ● Weight: 0.45-lbs ● Breaking Strength: 5,000 lbf / 22kn
Specifically designed for permanent use on wood rooftops, these roof safety anchors are manufactured with two alloy D-ring ends, is 18″ long and composed of stainless steel for an exceptionally long...
The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated...
The Malta Dynamics Threaded Top 12″ Roof Anchor is a fixed post roof top safety anchor, intended for permanent applications only. The A6305 has been thoroughly tested (see testing and compliance...
The Malta Dynamics Threaded Top 18″ Roof Anchor is a fixed post rooftop anchor, intended for permanent applications only. The A6306 has been thoroughly tested (see testing and compliance page on...
The Guardian Fall Protection Concrete Anchor Strap is sheathed in heavy duty nylon webbing to protect the inner core from abrasion and wear, and is one of the most cost effective anchors around. It...
Non-penetrating design to eliminate parapet wall damage
No Installation tools required- Dual tightening handles for even force distribution
Rubber protective pads to eliminate damage to the...
Description
The 7/8″ Precast Concrete Toggle Lok Anchor 5K (Part #A6004) is a versatile, portable precast anchor used exclusively as a concrete/steel anchorage connector...
Description
The 3/4″ Removable Concrete Anchor 5K (Part # A6002) is designed for use in 12-inch thick cured concrete with a compression strength of at least 3000 p.s.i...
The 1″ Removable Concrete Anchor 10K is designed for use in 10-inch thick, cured concrete with a compression strength of at least 3000 p.s.i. This reusable concrete anchor is easy to...
Description
Malta Dynamics Vertical/Fixed Beam Anchors (Part #A6105) are designed for fall protection, rope access, and work positioning. This beam anchor is constructed with...
The Floor Joist Safety Bar follows the same design principles of our Safety Bar but is designed to be installed onto engineered 4×2 floor joists. Providing fall protection during the truss...
Description
The I-Beam Trolley Anchor (Part # A6101) is an anchor designed to be used in combination with either a lanyard or an SRL to form a complete I-Beamtrolley...