This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail fasteners and a butyl strip flashing. The 8-1/2” length is idea for shingle type roofs allowing the anchor to be attached over the roofing material. The RS-10 is exactly ½ of our RetroFit anchor, making it an ideal complimentary anchor for hip ridges and shed roofs.
Available with a “Dual Hole” option to accept larger diameter fasteners to give you more mounting options. We can supply you with special, high strength Head-Lok Fasteners up to 12” long for deeper substrate installation.
- Built for Shingle Roofing and Wall Applications
- Permanent Low-Profile Design Does Not Detract from Roof
- Use on Roof or Wall Surfaces
- Easy to Install and Includes all Fasteners
- Rated for 5,000 OSHA Fall Arrest
| Technical Specifications | |
|---|---|
| Device | Single D-ring Permanent Roof Anchor |
| Fall Protection Rating | Fall Arrest and Fall Restraint |
| Structure Attachment – Wood | Wood Framed Structure |
| Structure Attachment – Steel | 24 gauge minimum metal decking with SAS engineering |
| Minimum Breaking | 5,000 pounds |
| Minimum Tensile | 5,000 pounds |
| Material – Strapping | 20 gauge 430 Stainless Steel |
| Material – D-rings | Stamped Dacromet or yellow zinc plated steel |
| Stamp Marks | Date of Manufacture Year/Month |
| Flashing | Butyl flashing for waterproofing 2 @ 4″ |
| Maximum User Weight | 340 pounds including tools and equipment |
| Hardware | 3-1/4″ Stainless steel nails |
| OSHA Standard | 1926:502 and 1910.66 |
| ANSI Standard | Z359.1-07 and A10.32-2012 |
| Canadian 3rd Party | Certified by L’Ordre des Ingenierus du Quebec |
