Super Anchor 2830 ARS Anchor for 2x4 Trusses

(No reviews yet) Write a Review
Super Anchor
Bulk Pricing:
Buy in bulk and save
Adding to cart… The item has been added

The industry standard in permanent anchorage devices, the ARS Series anchor has been providing fall protection for the residential and commercial building industry for over 25 years. They are typically installed during the framing stage and then they are flashed into the roofing material as a permanent fixture for the structure. They provide a fall protection tie off point for all tradesmen and maintenance workers.


This anchor is available in 2 models – the ARS 2×4 and ARS 2×8. The ARS 2×4 is designed for 2×4 trusses and installs with the grade 8 bolt and teko nails. No additional blocking is necessary, and the anchor is less expensive than our ARS 2×8 strictly based on less material being used in manufacturing. The ARS 2×8 is designed for 2×4, 2×6 and 2×8 trusses and has a corresponding attachment hole to accommodate the truss. Both the ARS 2×4 and 2×8 can be used on 2×10 and 2×12 trusses/rafters using the drill-through attachment method. These anchors are supplied with a PVC flashing base for use on all asphalt shingle and wood shake roofs. The anchor is made from stainless steel and includes mounting hardware.

  • Fully Engineered Fall Arrest Anchor
  • 100% Waterproof with Dual Flashing System
  • Factory Supplied Attachment Hardware
  • Ideal for Most Types of Roofing Material
  • Can be used by all Tradesmen
  • Permanent – Stays for Life of Structure
Technical Specifications
Device Permanent truss anchor for 1 person fall protection
Fall Protection Rating Fall Arrest and Fall Restraint
Structure Attachment 2×4 – 2×12 trusses/rafters
Minimum Breaking 5,000 pounds
Minimum Tensile 5,000 pounds
Material 11 or 14-gauge 430 stainless steel or Dacromet coated mild steel
Flashing Injection Molded PVC
Stem Cover Injection Molded Plastic
Temperature Rating -30 degres Farenheit up to 120 degrees Farenheit
Maximum User Weight 340 pounds including tools and equipment
Hardware 5/16″-18 x 2-1/4″ Grade 8 bolt with locknut
OSHA Standard 1926:502 and 1910.66
ANSI Standard Z359.1-07 and A10.32-2012
CSA Standard Z259.11-05 for applicable products

Related Products