Malta Dynamics A6316 Parapet Wall Anchor – Secure and Non-Penetrating Fall Protection
Ensure the safety of your workers with the Malta Dynamics A6316 Parapet Wall Anchor, a reliable solution designed for job sites featuring flat roofs surrounded by parapet walls. This innovative anchorage system provides a secure connection point for self-retracting lifelines (SRLs) without damaging the parapet wall. The non-penetrating design and dual-tightening handles ensure even force distribution, making installation and adjustment easy. This reusable anchor accommodates parapet walls ranging in thickness from 2.36 inches to 14.1 inches, making it a versatile and practical choice for a variety of applications.
Portable Security. Zero Wall Damage.
Watch our technical overview to learn how to properly deploy, tighten, and inspect the Malta Dynamics A6316 Parapet Anchor to ensure a 5,000-lb rated tie-off point without the need for drilling or permanent fasteners.
Easy Installation with No Tools Required
Time is critical on a job site, and the Malta Dynamics Parapet Wall Anchor installs in just a minute or two without tools. The anchor’s heavy-duty rubber pads protect the parapet wall from damage during installation. Once secured, the anchor can be easily repositioned around the worksite, offering flexibility and convenience while maintaining a strong, reliable connection.
Durable Construction and Certified Compliance
Constructed from galvanized steel, the A6316 is built for the rigors of commercial job sites. It meets the ANSI Z359.18-2017 Type A standard and complies with OSHA 1926 Subpart M and OSHA 1910 regulations. With a minimum tensile breaking strength of 5,000 lbs, this anchor provides robust support for a single user between 130 and 310 lbs.
Malta Dynamics A6316 Technical Submittal Data & Compliance Docs:
Review the essential safety and engineering documentation for the A6316 Parapet Wall Anchor:
- Malta Dynamics A6316 Anchor Instruction Manual – Full guide on deployment and torque handling.
- Technical Spec Sheet & Submittal Data Malta A6316 Parapet Anchor – Dimensional drawings and load ratings.
Malta Dynamics A6316 Parapet Wall Anchor FAQ
1. What wall thicknesses are compatible with the A6316?
The A6316 is highly adjustable, fitting parapet walls ranging from 2.36 inches up to 14.1 inches in thickness. Ensure your wall falls within this range so the rubber pads seat properly and the tightening handles engage fully. Refer to the Malta A6316 Parapet Anchor Instruction Manual above.
2. Does this anchor damage the wall or the roof membrane?
No. The "non-penetrating" design uses a compression system. Heavy-duty rubber pads protect the parapet's vertical surfaces from scratches or crushing, and because no drilling is required, the integrity of the wall and flashing is preserved.
3. Is the A6316 rated for fall arrest or fall restraint?
The A6316 has a 5,000-lb breaking strength and is rated for both fall arrest and fall restraint for a single user. Always ensure the parapet wall itself is structurally sound and capable of withstanding the forces applied during a fall.
4. Can I use a lanyard with this anchor?
It is recommended to use a Self-Retracting Lifeline (SRL) with parapet anchors to limit free-fall distance. If using a lanyard, it must be shock-absorbing and restricted to a maximum 6-foot free fall per OSHA regulations.
5. Are tools required to tighten the anchor?
No tools are required. The A6316 features dual ergonomic tightening handles that allow you to secure the anchor by hand. Once hand-tightened snugly against the wall, it is ready for use.
6. Can I install this on a curved parapet wall?
No. The anchor pads must have full, flat contact with the wall surfaces to distribute the load safely. Installing on a curved or irregular surface may cause the anchor to slip or fail during a fall.
7. How do I avoid common mistakes during deployment?
- 1. Wall Strength: Never install on a parapet wall made of loose brick, unreinforced masonry, or thin sheet metal caps that cannot support a 5,000-lb load.
- 2. Pad Inspection: Always check the rubber pads before use. If they are torn or missing, the anchor may slip or damage the wall.
- 3. Tightening: Ensure both handles are tightened evenly so the anchor sits level on the wall. An unevenly tightened anchor can twist under load.
