The SSRA3 Anchor Plate is a universal mounting plate constructed of 6061-T6 aluminum and professionally tested to over 10,000 lbs. It can be used to mount anything to a standing seam roof, including fall protection equipment. It is pre-drilled with 4 holes to accept the Falltech 7414 D-Ring (included) mounted either vertically for standard anchoring or mounted horizontally for Horizontal Lifeline attachment.
Each SSRA3 Anchor Plate requires 2 Standing Seam Roof Anchors for proper mounting, sold separately.
This device is designed and tested as an anchor point for mounting Horizontal Lifelines to 22 ga. and 24 ga. steel standing seam roofs.
Overall plate dimension are 12"x27" with a 11"x12" mounting area between the slide grooves. The SSRA3 Anchor Plate will fit all compatible standing seams 12" - 24" wide.
Includes the following:
(1) SSRA3 Anchor Plate - 6061-T6 Aluminum
(4) Grade 8, 3/8-16x1" Top Bolts for securing the SSRA3 Anchor Plate to the SSRA1 Anchors.
(4) Grade 8, 3/8" Flat Washers used for securing the SSRA3 Anchor Plate to the SSRA1 Anchors.
(1) Falltech 7414 D-Ring
(2) Grade 8 3/8-16x1.25" Top Bolts for securing D-Ring to SSRA3 Anchor Plate.
(2) Grade 8 3/8-16 Locking Flange Nut for securing D-Ring to SSRA3 Anchor Plate.
(4) Grade 8 3/8" Flat Washer for securing D-Ring to SSRA3 Anchor Plate.
10 Reasons To Buy The Standing Seam Roof Anchor
Standing Seam Roof Anchor SSRA3 Anchor Plate
Installation Instructions Test Results Cut Sheet
