FallTech 7055S 2D Work Positioning Belt – 4" x 25" Support Pad (Small)
The FallTech 7055S 2D Work Positioning Belt is a professional-grade safety accessory designed to provide essential lumbar support and secure tie-off points for smaller-framed workers. Featuring a 4" x 25" bonded waist support pad with a breathable tricot lining and PU foam construction, this belt is specifically engineered to be added to non-belted full-body harnesses. By providing 5,000 lb-rated side D-rings, the 7055S transforms a standard harness into a specialized positioning system, ensuring stability and comfort during prolonged hands-free tasks in construction, utility, and tower environments.
Ergonomic PU Foam and Lumbar Support for Smaller Frames
The centerpiece of the FallTech 7055S is the multi-layer waist support pad, utilizing high-density PU foam for superior pressure distribution. The 25-inch long pad ensures that the structural webbing does not dig into the hips or lower back during high-tension work-positioning maneuvers. The interior is lined with a moisture-wicking tricot fabric, providing essential airflow and comfort during long shifts in demanding outdoor job sites. The "Small" designation ensures the belt adjustment range remains precise for those who require a more compact, secure fit.
Plated Alloy Steel Hardware and Reinforced Fit
To ensure a secure and adjustable fit, the 7055S features a removable belt with 7 adjustment positions, providing a total range of 9 inches. The tongue-buckle system is reinforced with brass grommets to prevent webbing fraying over time, even in abrasive environments. The side D-rings are manufactured from plated alloy steel with a minimum static strength of 5,000 lbs, ensuring a robust and reliable connection point for work-positioning lanyards and rebar assemblies.
Technical Specifications and Performance Ratings
Material & Performance Specifications:
- Support Pad: 4" x 25" Bonded PU Foam with Tricot Lining
- Webbing: Heavy-duty Polyester; 5,000 lb min. static strength
- D-rings: Plated alloy steel; 5,000 lb min. static strength
- Tongue Buckle: Plated alloy steel with brass grommets; 3,372 lb min. strength
- ANSI User Capacity: 130 to 310 lbs max.
- OSHA User Capacity: 130 to 425 lbs max.
- Compliance: Meets OSHA 1926.502 and 1910.66 regulations
FallTech 7055S Technical Submittals & Compliance Docs:
- FallTech 7055S Specification Sheet – Full material data and load-rating specifications.
- FallTech 7055S Instruction Manual – Detailed guide on harness integration and proper sizing.
FallTech 7055S Support Belt FAQ
1. Can the 7055S be used as the primary fall arrest anchor?
No. The FallTech 7055S is only a positioning and support belt. It must always be used in conjunction with a Full Body Harness. Primary fall arrest forces must always be directed to the dorsal (back) D-ring of the harness, never to the side D-rings of the belt.
2. How do I attach this belt to my current harness?
The 7055S is a removable belt that threads through the existing belt loops of a non-belted harness. It is essential to ensure that the belt is centered and all harness loops are utilized for structural stability. For a step-by-step setup guide, please see the FallTech 7055S Instruction Manual linked above.
3. What is the advantage of the 4" x 25" pad for smaller workers?
The 25-inch length ensures the support pad wraps properly around the lumbar region without overlapping or interfering with the front buckle on smaller frames, providing optimal pressure distribution during work-positioning tasks.
4. What work applications require the side D-rings?
Side D-rings are used for "work-positioning," allowing a worker to be supported in tension while climbing rebar or towers. By connecting a positioning lanyard to these rings, the worker can lean back and work with both hands free.
5. Is the FallTech 7055S ANSI and OSHA compliant?
Yes. The 7055S meets or exceeds OSHA 1926.502 and 1910.66 regulations. While it follows general ANSI Z359 requirements for component positioning, always verify the specific job-site ANSI requirements for your total system.
6. Can I add tool pouches to this belt?
Yes. The industrial-strength polyester webbing is rated at 5,000 lbs and is designed to accommodate most standard tool bags. However, ensure that any added weight does not pull the belt out of its safe, aligned position on your hips.
7. How do I avoid common mistakes with the FallTech 7055S?
- 1. Improper Connection: Never connect your primary fall arrest lanyard to the side D-rings; they are only rated for positioning and restraint.
- 2. Overtightening: While the belt should be snug, overtightening can restrict blood flow during long shifts. Use the 7-position buckle to find a firm, comfortable fit for a smaller waist.
- 3. Neglecting Inspection: Check the brass grommets for signs of deformation or cracking before every use; a damaged grommet can lead to webbing slippage through the buckle.
