SSRA3 Anchor Plate For Horizontal Lifelines on Standing Seam Metal Roofs

Name: SSRA3 Anchor Plate For Horizontal Lifelines on Standing Seam Metal Roofs
Brand: Standing Seam Roof Anchor
SKU: SSRA3
Price: 379 USD
Availability: InStock

Description
Warranty Information
Reviews

SSRA3 Anchor Plate For Horizontal Lifelines On Standing Seam Roofs

The SSRA3 Anchor Plate is a universal mounting plate constructed of 6061-T6 aluminum and professionally tested for OSHA compliance. The SSRA3 is designed to mount atop two SSRA1 seam anchors and fits about 95% of today's standing-seam profiles. Once installed, workers can mount anything on a standing-seam roof, including fall protection equipment. The SSRA3 Anchor Plate includes a D-ring that can be mounted either vertically or horizontally for horizontal lifeline attachment. The SSRA3 Anchor Plate is the foundation of our SSRA HLL kit for mounting a 100' temporary horizontal lifeline to a compatible standing seam metal roof.

SSRA1 compatible seam profiles for SSRA3 Anchor Plate

Check out our quick unboxing of the SSRA3 Anchor Plate to see exactly what’s included and how the slide grooves allow it to fit 12- to 24-inch-wide panels for horizontal lifeline setups.

Standing Seam Roof Anchor SSRA3 Anchor Plate Features

Each SSRA3 Anchor Plate requires two Standing Seam Roof Anchors for proper mounting — sold separately.

The SSRA3 Anchor Plate is designed and tested as an anchor point for mounting horizontal lifelines to 22-gauge and 24-gauge steel standing seam roofs.

Overall plate dimensions are 12"x27" with an 11"x12" mounting area between the slide grooves. The SSRA3 Anchor Plate will fit all compatible standing seams up to 24" wide.

Includes the following:

(1) SSRA3 Anchor Plate - 6061-T6 Aluminum
(4) Grade 8, 3/8-16x1" Top Bolts for securing the SSRA3 Anchor Plate to the SSRA1 Anchors.
(4) Grade 8, 3/8" Flat Washers for securing the SSRA3 Anchor Plate to the SSRA1 Anchors.
(1) Falltech 7414 D-Ring
(2) Grade 8 3/8-16x1.25" Top Bolts for securing D-Ring to SSRA3 Anchor Plate.
(2) 3/8-16 Locking Flange Nut for securing D-Ring to SSRA3 Anchor Plate.
(4) Grade 8 3/8" Flat Washer for securing D-Ring to SSRA3 Anchor Plate.

Installation Instructions | Test Results | Cut Sheet

Ordering and Return Policy: Please review our Return Policy before ordering. The return policy is 7 days to inspect the equipment for defects and there is a 25% restocking fee. Seam fitment, paint scratches, and dimpling are normal actions of seam anchors and are not product defects.

SSRA3 Anchor Plate FAQ

Does the SSRA3 include the SSRA1 seam anchors?

No. The SSRA3 is a mounting plate only. Each SSRA3 Anchor Plate requires two (2) SSRA1 Seam Anchors for proper installation.

What is the primary use for the SSRA3 Anchor Plate?

The SSRA3 is most commonly used to provide a certified 5,000 lbs anchorage point for temporary horizontal lifelines (HLL) or heavy-duty D-ring attachments.

What is the maximum seam width the plate can span?

The SSRA3 Anchor Plate features adjustable slide grooves that allow it to fit compatible standing-seam profiles with a spacing of up to 24 inches.

Can the D-ring be mounted in different directions?

Yes. The included Falltech 7414 D-ring can be mounted vertically or horizontally on the plate, providing flexibility for different lifeline configurations.

Is the SSRA3 Plate OSHA compliant?

Yes. When mounted on two SSRA1 anchors and installed according to the manual, the SSRA3 is professionally tested to meet OSHA 1926 Subpart M and ANSI Z359.1 standards.

What are the most common mistakes to avoid when installing the SSRA3 Anchor Plate?

To ensure a safe and compliant installation, avoid these common errors:

1. Using only one anchor: The SSRA3 must bridge two anchors for structural integrity.
2. Incorrect Bolt Torque: Always use provided Grade 8 hardware and ensure all top bolts are tightened securely.
3. Misaligning the D-Ring: Position the D-ring to match the intended direction of the lifeline pull.

The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the Standing Seam Roof Anchor product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, or problems with electrical power, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

0 Reviews Hide Reviews Show Reviews