The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.
● Meets ANSI A10.32-12 ● Compliant with OSHA 1910 and OSHA 1926 Subpart M ● Product Weight: 12.4 lbs. ● Easy to install ● Supports 1 worker in fall arrest, or 2 workers in restraint ● 4 connection points ● Min. Breaking Strength 5,000 lbs. ● Worker Capacity Range: 130-310 lbs. ● Material: Powder Coated Steel
Specifically designed for permanent use on wood rooftops, these roof safety anchors are manufactured with two alloy D-ring ends, is 18″ long and composed of stainless steel for an exceptionally long...
The Malta Dynamics Reusable Roof Anchor is a reusable anchorage connector designed for temporary use on wood rooftops. Our roof anchors fit all roof pitches from flat to 12/12 and their thick-plated...
The Malta Dynamics Threaded Top 12″ Roof Anchor is a fixed post roof top safety anchor, intended for permanent applications only. The A6305 has been thoroughly tested (see testing and compliance...
The Malta Dynamics Threaded Top 18″ Roof Anchor is a fixed post rooftop anchor, intended for permanent applications only. The A6306 has been thoroughly tested (see testing and compliance page on...
Non-penetrating design to eliminate parapet wall damage
No Installation tools required- Dual tightening handles for even force distribution
Rubber protective pads to eliminate damage to the...
D-Minus Anchor
The D-Minus is our most economical fall arrest anchor and is available in a powder coated 11-gauge mild steel or 11-gauge 430 stainless steel. Installs with 6 factory supplied...
This is a single sided D-ring anchorage device that are installed at the ridge, hip-ridge or in the field for permanent or temporary use. Permanent use anchors are supplied with stainless steel nail...
The 5K Drop Through Anchor – 8.5′ is a 5,000-pound capacity overhead anchorage connector used with temporary roof fall protection systems. It is designed to drop through an...
Description
Malta Dynamics Vertical/Fixed Beam Anchors (Part #A6105) are designed for fall protection, rope access, and work positioning. This beam anchor is constructed with...
The 1″ Removable Concrete Anchor 10K is designed for use in 10-inch thick, cured concrete with a compression strength of at least 3000 p.s.i. This reusable concrete anchor is easy to...