SSRA2 Adjustable Roof Jack Adapter For Walkboards on Standing Roofs

(No reviews yet) Write a Review
$558.00
Brand:
Standing Seam Roof Anchor
SKU:
SSRA2
Availability:
In Stock
Processing Time:
Typically 1 Business Day
Adding to cart… The item has been added

SSRA2 Adjustable Roof Jack Adapters For Standing Seam Roofs

The SSRA2 Adjustable Roof Jack Adapter converts SSRA1 seam anchors into safe, adjustable walkboard supports. When installed as a pair, these adapters hold 10-foot 2x10 wooden walkboards and provide secure footing on steep standing seam roofs without penetrations.

Traditional walkboard systems often require penetrations, heavy brackets, and expensive hardware. The SSRA2 changes the game. These adapters mount directly on SSRA1 Standing Seam Roof Anchors and support walkboards across more than 500 seam profiles covering nearly 95 percent of today’s standing seam roofs. Workers get a safe, level walking platform, and building owners keep their roof warranties intact.

SSRA1 compatible seam profiles for SSRA2 Roof Jack Adapters

We sell SSRA2 Roof Jack Adapters in pairs. Contact us if you need a single bracket. The SSRA2 Roof Jack Adapters are also included in our Roof Jack Pro Pack and Ultimate Pro Pack, designed for larger crews and more demanding job sites.

Key Features Of The SSRA2 Adjustable Roof Jack Adapter

Easy SSRA1 Seam Anchor Attachment

The SSRA2 Roof Jack Adapters mount on top of any SSRA1 anchor with two bolts, turning a tie-off point into a non-penetrating 10-foot walkboard support. The SSRA2 Roof Jack Adapters are a part of the SSRA expandable fall protection system for standing seam roofs, covering tie-offs, 100-foot horizontal lifelines, and non-penetrating walkboard platforms.

SSRA2 Roof Jacks Adjust For Various Roof Pitches And Seam Heights

The SSRA2 Roof Jack Adapter accommodates roof pitches from 6:12 to 12:12 and seam heights from 1 to 3 inches. Its padded adjustable side feet stabilize the seams to create a level walking surface on steep panels.

Heavy-Duty, Lightweight Roof Jack Construction

The SSRA2 Roof Jack Adapters combine rugged strength with corrosion-resistant 6061-T6 aluminum and stainless steel hardware. Crews can carry, install, and reposition them quickly, reducing downtime while maintaining safety.

Installation Guide For The SSRA2 Roof Jack Adapter

  1. Install two SSRA1 seam anchors without D-rings, no more than 8 feet apart.
  2. Attach an SSRA2 Roof Jack Adapter on top of each anchor using two bolts.
  3. Place a full-thickness 2x10 wooden walkboard across the two SSRA2 Roof Jacks and secure with wood screws through the face of each bracket.

Each walkboard supports one worker, creating a stable and compliant work platform.

A Cost-Effective Walkboard Solution For Standing Seam Roofing Contractors

Comparable walkboard systems can cost thousands of dollars and serve only one purpose. The SSRA2 offers multiple functions at a fraction of the price. With SSRA1 anchors, you can use them for tie-offs, lifeline systems, and walkboard support—making the SSRA2 the most affordable and versatile standing seam roof safety system on the market.

SSRA2 Roof Jack Adapter Test Report And Instructions

The SSRA2 Roof Jack Adapters were professionally tested at an ISO 17025-accredited materials testing laboratory, confirming full compliance with OSHA 1926 safety standards.

Ordering And Return Policy

Please review our Return Policy before ordering, as it contains helpful tips for confirming clamp fitment to your seams. The return policy is 7 days to inspect the equipment for defects, and there is a 25% restocking fee. Seam fitment, paint scratches, and dimpling are normal occurrences with seam anchors. They are not product defects or reasons for returns.

The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the Standing Seam Roof Anchor product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, or problems with electrical power, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

SSRA2 Roof Jack Adapter Frequently Asked Questions

The SSRA2 is designed for standing seam metal roofs and fits over 500 seam profiles, about 95% of today's market. It works with roof pitches ranging from 6:12 to 12:12. You can check to see if your panels are compatible with our SSRA1 Seam Anchor on our SSRA1 Seam Anchor Compatibility Chart.

Yes, each SSRA2 Roof Jack Adapter mounts on top of an SSRA1 non-penetrating anchor. You'll need two SSRA1 Seam Anchors to support a 10-foot wooden walkboard.

It provides a stable, level walking surface for one worker per 10-foot walkboard. The adjustable height feet accommodate seam heights ranging from 1 to 3 inches, ensuring secure footing on steep roofs with slopes of 6:12 to 12:12. Better footing reduces worker fatigue and minimizes slips and falls on slippery metal roofs.

The SSRA2 Roof Jack Adapters have been professionally tested at an ISO 17025 materials testing lab and meet OSHA 1926 standards for fall protection.

Traditional walkboard brackets for standing seam roofs cost around $2,000 and are heavy, with limited seam compatibility. The SSRA2 expands the functionality of your SSRA1 fall protection anchors, delivering safety and versatility at a fraction of the cost.

SSRA2 Roof Jack Installation is quick and easy when paired with the SSRA1 anchor system. The SSRA2 mounts on top of the SSRA1 Anchors and secures without penetrating the roof, making setup and takedown fast and efficient. This assembly saves valuable time on steep-pitched jobs and reduces wear on roofing materials. The SSRA2 is adjustable for various roof pitches and seam heights.

Standing Seam Roof Anchor SSRA2 - Adjustable Roof Jack Adapter

Standing Seam Roof Anchor SSRA2 Roof Jack Adapter

Standing Seam Roof Anchor SSRA1 And Adapter Plates

Standing Seam Roof Anchor Full Product Line Introduction

About Standing Seam Roof Anchor

In 2015, the Standing Seam Roof Anchor System began providing specialized fall protection solutions for standing seam roofs. It all started with the SSRA1 seam anchor, designed to lock onto 95% of all standing seam profiles without penetrating the panels or violating warranties. This patented innovation was the first one-piece design in the industry that used six pairs of opposing set screws for seam attachment.

A couple of months later, the SSRA2 Adjustable Roof Jack adapter was released, making walkboards possible on standing seam roofs. The adjustable height side legs stabilize the roof seams and create a stable walkboard surface. After that, we introduced the SSRA3 Anchor Plate, which allows for the deployment of temporary horizontal lifelines on standing seam roofs without penetrations. This comprehensive product line offers unmatched safety and reliability across multiple industries in the U.S. and Canada. All Standing Seam Roof Anchor products are proudly designed and fabricated in the U.S.A.