SSRA2 Roof Jack Bundle with SSRA1 Anchors for Standing Seam Roofs

(No reviews yet) Write a Review
$949.00
Made in the USA
Brand:
Standing Seam Roof Anchor
SKU:
SSRA2 Pair with SSRA1 Anchors
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Processing Time:
Typically 1 Business Day
schema-description:
Walkboard kit with two SSRA1 non-penetrating standing seam roof anchors and two SSRA2 adjustable roof jacks to support a level 2x10 walkboard on 6:12 to 12:12 steel roofs, one worker per board.
Adding to cart… The item has been added

SSRA2 Roof Jack Bundle: Two SSRA2 Adjustable Roof Jacks and Two SSRA1 Standing Seam Roof Anchors

The SSRA2 Roof Jack Bundle is the complete, ready-to-install walkboard kit for standing seam metal roofs. It pairs two SSRA2 Adjustable Roof Jack Adapters with the two SSRA1 Standing Seam Roof Anchors they mount on, so you can set a level 2x10 walkboard on roof pitches from 6:12 to 12:12 without drilling a single hole. It's the turnkey choice for roofers, solar installers, and service crews who don't own SSRA1 anchors yet, and it costs less than buying the anchors and the jack pair separately.

Fall Protection Distributors, LLC, the master distributor of the SSRA line, provides non-penetrating fall protection anchors, walkboards, and horizontal lifelines for standing seam roofs, shipping across the US and Canada.

Complete Bundle: Anchors and Roof Jacks Included

This bundle includes (2) SSRA1 Standing Seam Roof Anchors and (2) SSRA2 Adjustable Roof Jacks, everything needed to mount one walkboard. Already own SSRA1 anchors? Buy the SSRA2 Roof Jack Adapter pair by itself. A separate tie-off anchor for the worker is not included: anyone on the walkboard must tie off to an independent anchor that is not connected to the platform.

Quick answer: what is the SSRA2 Roof Jack Bundle?

The SSRA2 Roof Jack Bundle is two SSRA1 non-penetrating standing seam roof anchors plus two SSRA2 adjustable roof jacks that bolt on top of them. Together, they hold a level 2x10 walkboard on 6:12 to 12:12 standing seam steel roofs with no panel penetrations. The anchors ship with cupped-tip set screws installed for 22-gauge steel; nylon-tip set screws, required on 24-gauge, are sold separately. Capacity is one worker per walkboard (one worker per 8 ft. of board plus 40 lbs. of materials).

SSRA2 Roof Jack Bundle Specifications at a Glance

  • 2 + 2SSRA1 anchors and SSRA2 roof jacks
  • 6:12 to 12:12Roof pitch range
  • 1 workerPer walkboard, plus 40 lbs. of materials
  • < 8 ftMaximum spacing between jacks
  • 1 to 3 in.Seam heights the stabilizer legs fit
  • 3,387 lbAverage SSRA2 maximum load in Intertek testing
  • 0Roof panel penetrations
  • 500+Standing seam profiles the SSRA1 fits

See What Comes in the Box: SSRA2 Roof Jack Bundle Unboxing

SSRA2 Roof Jack Bundle (SSRA2 Pair with SSRA1 Anchors) unboxing video: two SSRA1 anchors and two SSRA2 roof jacks SSRA2 Roof Jack Bundle Unboxing

Unboxing the SSRA2 Roof Jack Bundle: two SSRA1 standing seam roof anchors, two SSRA2 adapter plates, and two red adjustable roof brackets for non-penetrating 2x10 walkboards on standing seam roofs.

Why Contractors Choose the SSRA2 Roof Jack Bundle

Working a steep standing seam roof shouldn't be a balancing act. This bundle gives your crew a level place to stand and stage materials, and it includes everything needed to mount it in one box.

  • Everything in one box: Two SSRA1 anchors and two SSRA2 roof jacks, ready for one walkboard. Add your 2x10 and wood screws, then get to work.
  • Zero roof penetrations: The SSRA1 clamps the seam with 12 stainless steel set screws, and the SSRA2 bolts on top: no holes, no caulk, no leaks, and no risk to the roof warranty.
  • Fits the roofs you work on: The SSRA1 fits more than 500 standing seam profiles in 22- and 24-gauge steel, including Snaplock, single lock, double lock, T-seam, and bulb seam.
  • Level on any pitch from 6:12 to 12:12: The red adjustable roof bracket sets on a pin through teardrop holes, so you can level the walking surface for the roof in front of you.
  • Stable on the seam: Adjustable-height stabilizer legs with padded feet fit seams from 1 to 3 in. tall. They come down to the panel on both sides of the seam to keep the jack from rocking, and the pads help protect the panel finish.
  • Two tie-off anchors when the job is done: Remove the roof jacks, reinstall the D-rings, and the SSRA1s become independently tested fall arrest anchor points for one worker each.

Why the SSRA2 Outperforms Single-Purpose Walkboard Brackets

Many standing seam walkboard brackets are big, heavy, bulky, and expensive, and they only do one job on a limited number of seam styles. The SSRA2 system is built differently:

  • Lighter on the roof: Each SSRA2 jack weighs about 13.5 lbs., including its SSRA1 anchor, so it is easy to carry up a ladder and move across the roof.
  • Fits far more roofs: The SSRA1 base fits more than 500 standing seam profiles, so one kit covers the roofs your crew actually works on.
  • Does more than walkboards: Remove the jacks, and the SSRA1s become fall-arrest anchor points. Add SSRA3 Anchor Plates and the same anchors carry a temporary horizontal lifeline.
  • Better value: One anchor system handles walkboards, tie-off, and lifelines, so you don't pay for brackets that sit in the truck between walkboard jobs.

How Many SSRA2 Roof Jacks Do You Need?

Use at least two roof jacks under every walkboard, spaced less than 8 ft. apart and mounted level with each other, with the board extending 6 to 12 in. past the end jacks. This bundle covers one walkboard shorter than 10 ft. Walkboards 10 ft. and longer need additional SSRA2 roof jacks on SSRA1 anchors so that no spacing reaches 8 ft. For crews staging larger roofs, the Roof Jack Pro Pack includes four SSRA2 roof jacks and eight SSRA1 anchors.

Capacity is one worker per 8 ft. of walkboard plus 40 lbs. of materials, and never more than one worker per board.

Which Set Screws to Use: Gauge and Torque Guide

The SSRA1 anchors in this bundle ship with cupped-tip set screws installed, and the bundle works with either set screw type. Confirm the panel gauge, choose one screw type, and use all 12 of that type on each anchor. Never mix cupped-tip and nylon-tip set screws on the same anchor.

Steel panel gaugeSet screws to useTorque
22 gaugeCupped tip (installed)90 in-lbs
22 gaugeNylon tip (sold separately)180 in-lbs
24 gaugeNylon tip only (required, sold separately)180 in-lbs

SSRA2 Roof Jack Bundle Third-Party Testing

SSRA2 roof jacks: Architectural Testing, Inc., an Intertek company, tested the SSRA2 adapter plate with its roof bracket installed. Each assembly was mounted on a mock standing seam set at 45 degrees to simulate a 12:12 roof and loaded until failure. Maximum loads ranged from 2,970 to 4,228 lbs., averaging 3,387 lbs. View the SSRA2 test report

SSRA1 anchors: independently tested on both panel gauges they are approved for.

  • 22-gauge steel, ANSI Z359.1-2007: Gravitec Systems, an ISO 17025-accredited lab, tested the SSRA1 to the section 4.3.6 anchorage connector qualification test with both cupped tip and nylon tip set screws. View the Gravitec report
  • 24-gauge steel, OSHA 1910.140: Using nylon tip set screws, Intertek found the SSRA1 met OSHA 1910.140(c)(8) static strength and (c)(7) proof load. In a direct-tension proof test, the anchor reached an ultimate failure load of 14,500 lbs. View the Intertek report
  • Corrosion, ASTM B117: salt spray tested for 696 hours. View the salt spray report
SSRA2 Roof Jack Bundle (SSRA2 Pair with SSRA1 Anchors) fits Snaplock, double lock, T and bulb seam profiles
▶ SSRA1 Compatibility Overview

This Panel Compatibility Chart is provided only as a reference for what the SSRA1 will physically mount to. It does not determine the structural integrity of any roof system or seam. It is the Qualified Person's responsibility to verify structural suitability in the event of a fall. The SSRA1 fits over 95% of standing seam panels. It is approved only for 22- and 24-gauge steel and is not compatible with aluminum, zinc, copper, or other soft metals (for those roofs, see the RidgePro Roof Peak Anchor). Do not install on curved or tapered seams. Batten seams are OK as long as the set screws are not on top of the batten strip. The SSRA2 is for roof pitches from 6:12 to 12:12 only.

▶ Nailstrip Panel Warning

Nailstrip-style panels are approximately 50% compatible. Some seams are too wide at the base, which can allow anchor movement during installation. Treat compatibility lists as guidelines, not guarantees.

▶ Installer Responsibility

It is solely the installer's or specifier's responsibility to confirm SSRA1 suitability for the specific panel and application. The employer and the designated Competent Person are solely responsible for evaluating, determining, and documenting the structural suitability of the supporting structure, including its ability to withstand all loads that may occur during a fall or related event.

▶ Test Fit Recommendation

Perform a test fit with an RCT seam clamp or SSRA1 anchor well before installation to confirm proper engagement with your exact panel profile.

▶ Set-Screw Options
  • Cupped-tip: 22-gauge steel only, torque to 90 in-lbs
  • Nylon-tip: 22- or 24-gauge steel (required on 24-gauge), torque to 180 in-lbs
  • Use all 12 of one type on each anchor. Never mix set screw types.
▶ Surface Impact

Minor seam dimpling and paint abrasion may occur. Scratches can be touched up with a matching paint pen.

How to Install the SSRA2 Roof Jack Bundle

You will need a 9/16" socket, an inch-pound torque wrench such as our 1/4" drive micro torque wrench, a screw gun or ratchet for the set screws, a nominal 2x10 walkboard, and 2" #10 wood screws. Read the SSRA2 instructions and the SSRA1 owner's manual before use.

  1. Install the anchors. Check your panel on the Panel Compatibility Chart, then install the two SSRA1 anchors in a straight, level line less than 8 ft. apart. Torque the set screws to 90 in-lbs for cupped tips or 180 in-lbs for nylon tips. Never use an impact gun.
  2. Remove the D-rings. Remove the D-rings, top bolts, and washers from the anchor bodies.
  3. Mount the adapter plate. Raise the stabilizer legs on both sides of the SSRA2 adapter plate to the highest position. Secure the plate to the anchor body with the Grade 8 3/8-16 x 7/8" top bolts and washers, and torque them to 90 in-lbs.
  4. Set the roof bracket. Lower the red adjustable roof bracket onto the adapter plate so the 3 stud bolts pass through the teardrop holes, and secure it with the 3 stainless steel wing nuts. Adjust the bracket angle for a level walking surface and make sure the adjustment pin is fully engaged.
  5. Lower the stabilizer legs. Loosen the wing nuts on each side of the adapter plate, lower the stabilizer legs until they contact the panel on each side of the seam, then hand-tighten.
  6. Install the walkboard. Set the 2x10 in the brackets with 6 to 12 in. extending past each end jack, and secure it to every bracket with 2" #10 wood screws before anyone steps on it.
  7. Tie off separately. The roof jacks are not fall protection. Every worker on the board must connect to a personal fall arrest system at an independent anchor that is not connected to the walkboard platform.

SSRA2 Roof Jack Bundle Inspection Requirements

Inspect each roof jack and SSRA1 anchor before every use. A Competent Person other than the user must also formally inspect the SSRA1 anchors at least every 6 months and log it in the owner's manual and on the device label. Free inspection forms and resources are available.

  • No cracks, bends, or corrosion on the anchors, adapter plates, stabilizer legs, or roof brackets
  • All 12 set screws present and undamaged on each anchor, with no cross-threading
  • All 3 stud bolts and all 7 wing nuts present and tight on each jack; adjustment pin fully engaged
  • Top bolts tight at 90 in-lbs and set screws at the correct torque
  • Walkboard sound, free of cracks, and screwed to every bracket
  • Labels present and legible, with the date of first use recorded

Remove any damaged component from service, and remove an anchor from service after any fall arrest.

SSRA2 Roof Jack Bundle Technical Specifications

TypeWalkboard kit: 2 SSRA1 non-penetrating standing seam roof anchors and 2 SSRA2 adjustable roof jacks
SKUSSRA2 Pair with SSRA1 Anchors
SSRA1 anchors2 x solid 6061-T6 aluminum, 12 in. L x 2.25 in. W x 2 in. H, 4.5 lbs. each; 1-1/16 in. seam throat, 1-1/2 in. T-slot
D-rings2 x forged plated steel, pivot up and down, 5,000 lb. rated, removable
Set screws24 stainless steel cupped-tip set screws installed (12 per anchor), 3/16 in. hex drive; works with nylon-tip set screws (sold separately)
Set screw torqueCupped tip 90 in-lbs (22 ga only). Nylon tip 180 in-lbs (22 or 24 ga, required on 24 ga)
SSRA2 adapter plates18 in. aluminum body with adjustable-height stabilizer legs (padded feet, fit seams 1 to 3 in. tall), 3 stud bolts and 7 stainless steel wing nuts per jack
Roof brackets2 x Guardian Qualcraft 2500 adjustable roof brackets (red), pin adjustment through teardrop holes
MountingEach adapter bolts to an SSRA1 body with its 2 Grade 8 3/8-16 x 7/8 in. top bolts (9/16 in. socket), 90 in-lbs.
Roof pitch6:12 to 12:12
CapacityOne worker per 8 ft. of walkboard plus 40 lbs. of materials; no more than one worker per board
SpacingJacks less than 8 ft. apart and level; board ends 6 to 12 in. past the end jacks; boards 10 ft. and longer need additional jacks
WalkboardNominal 2x10 lumber (not included), secured to each bracket with 2 in. #10 wood screws
WeightAbout 13.5 lbs. per jack, including its SSRA1 anchor
Compatible panels22 and 24 ga steel standing seam, 500+ profiles
TestingSSRA2: Architectural Testing, Inc. (an Intertek company), average maximum load 3,387 lbs. at a simulated 12:12 pitch. SSRA1: ANSI Z359.1-2007 section 4.3.6 on 22 ga (Gravitec); OSHA 1910.140(c)(7) and (c)(8) on 24 ga with nylon tips (Intertek); ASTM B117 salt spray, 696 hours
Fall protectionThe roof jacks are not a fall protection device. Workers tie off to an independent anchor not connected to the platform.
PatentSSRA1: US D629,679

What's Included in the SSRA2 Roof Jack Bundle

  • (2) SSRA1 Standing Seam Roof Anchors, each with 12 stainless steel cupped-tip set screws installed
  • (2) 5,000-lb-rated forged D-rings, installed
  • (2) 2" 3/16" Allen bits
  • (2) SSRA2 adapter plates with padded, adjustable stabilizer legs
  • (2) Guardian Qualcraft 2500 adjustable roof brackets (red)
  • (14) stainless steel wing nuts, 7 per jack: 3 to secure the roof bracket and 2 on each side for the stabilizer legs
  • SSRA1 owner's manuals and SSRA2 installation instructions

Not included: a separate worker tie-off anchor, nylon-tip set screws (required on 24-gauge steel), 2x10 walkboard, wood screws, or a torque wrench.

More SSRA Walkboard Kits

  • SSRA2 Roof Jack Adapter Pair: The two roof jacks without anchors, for crews that already own SSRA1s.
  • Roof Jack Pro Pack: Built for crews. (8) SSRA1 anchors with nylon-tip set screws, (4) SSRA2 roof jacks, and a torque wrench.
  • Ultimate Pro Pack: The complete standing seam package: (8) SSRA1 anchors, a torque wrench, (4) SSRA2 roof jacks, (2) SSRA3 Anchor Plates, and a 100' horizontal lifeline.

Technical Documentation and Support

SSRA2 Instructions | SSRA2 Test Report | SSRA1 Owner's Manual | SSRA1 Cut Sheet | SSRA1 Spec Sheet | SSRA1 Test Reports | Panel Compatibility Chart | Fall Clearance Calculator

Ordering and Return Policy: Please review our Return Policy before placing your order. Note that a 7-day inspection period applies, and returns are subject to a 25% restocking fee. Set screw dimpling and paint scratches are normal occurrences with seam anchors and are not considered product defects.

SSRA2 Roof Jack Bundle Frequently Asked Questions

What comes in the SSRA2 Roof Jack Bundle?

Two SSRA1 standing seam roof anchors, each with a 5,000-lb-rated forged D-ring and 12 cupped-tip set screws installed, two 2" 3/16" Allen bits, two SSRA2 adapter plates with padded stabilizer legs, two red Guardian Qualcraft 2500 roof brackets, 14 stainless steel wing nuts (seven per jack), and the SSRA1 manuals and SSRA2 instructions. You provide the 2x10 walkboard and 2" #10 wood screws.

Does the bundle work on 24-gauge steel?

Yes, with nylon-tip set screws. The anchors ship with cupped-tip set screws, which are for 22-gauge steel only. On 24-gauge steel, replace them with nylon-tip set screws (sold separately in packs of 12) and torque to 180 in-lbs. Use all 12 of one type on each anchor and never mix them.

Do I need a separate anchor to tie off while on the walkboard?

Yes. A separate tie-off anchor is not included. The roof jacks are a staging system, not fall protection, so every worker on the walkboard must connect to a personal fall arrest system at an independent anchor that is not connected to the platform, such as another SSRA1 with its D-ring installed.

How much weight can the walkboard hold?

The SSRA2 is rated for one worker per 8 ft. of walkboard plus 40 lbs. of materials, and no more than one worker per board. In third-party testing at Intertek, the adapter plate with its roof bracket averaged a 3,387 lb. maximum load at a simulated 12:12 pitch.

How long a walkboard does this bundle support?

One walkboard shorter than 10 ft. Jacks must be less than 8 ft. apart, with the board extending 6 to 12 in. past each end jack, so boards 10 ft. and longer need additional SSRA2 roof jacks on SSRA1 anchors.

What roof pitches does the bundle work on?

Roof pitches from 6:12 to 12:12. The red roof bracket adjusts with a pin through teardrop holes so you can set a level walking surface, and the stabilizer legs fit seams from 1 to 3 in. tall.

Can I use the SSRA1 anchors for fall arrest later?

Yes. Remove the roof jacks, reinstall the D-rings and top bolts, and each SSRA1 becomes a fall-arrest anchor point for one worker, up to 310 lbs., including tools. The SSRA1 fits more than 500 standing seam profiles in 22- and 24-gauge steel. For softer metal roofs that the SSRA1 is not compatible with, the RidgePro Roof Peak Anchor is a great alternative.

SSRA Instructional Videos

See the SSRA1 and SSRA2 in action before you buy. The bundle unboxing video is near the top of this page. Each video loads only when you press play.

How to Install the SSRA1 Standing Seam Roof Anchor

SSRA2 Roof Jack Bundle (SSRA2 Pair with SSRA1 Anchors) install video: seating the SSRA1 and torquing the set screws How to Install the SSRA1 Standing Seam Roof Anchor

Step-by-step SSRA1 installation: seat the anchor on a steel standing seam, set all 12 stainless set screws, and torque them to spec with a torque wrench.

Standing Seam Roof Anchor SSRA2 Roof Jack Adapter

SSRA2 Roof Jack Bundle (SSRA2 Pair with SSRA1 Anchors) video: SSRA2 roof jacks holding a walkboard on SSRA1 anchors Standing Seam Roof Anchor SSRA2 Roof Jack Adapter

How the SSRA2 Roof Jack Adapter attaches to SSRA1 anchor points so crews can use walkboards on standing seam metal roofs with no penetrations in the seam.

Standing Seam Roof Anchor Full Product Line Introduction

SSRA2 Roof Jack Bundle (SSRA2 Pair with SSRA1 Anchors) video: SSRA product line with SSRA2 roof jack and SSRA3 plate Standing Seam Roof Anchor Full Product Line Introduction

How SSRA1 anchors use adapter plates: an introduction to the SSRA2 Roof Jack Adapter for walkboards and the SSRA3 Anchor Plate for horizontal lifelines.

The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the Standing Seam Roof Anchor product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, or problems with electrical power, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

About Standing Seam Roof Anchor

In 2015, the Standing Seam Roof Anchor System began providing specialized fall protection solutions for standing seam roofs. It all started with the SSRA1 seam anchor, designed to lock onto 95% of all standing seam profiles without penetrating the panels or violating warranties. This patented innovation was the first one-piece design in the industry that used six pairs of opposing set screws for seam attachment.

A couple of months later, the SSRA2 Adjustable Roof Jack adapter was released, making walkboards possible on standing seam roofs. The adjustable height side legs stabilize the roof seams and create a stable walkboard surface. After that, we introduced the SSRA3 Anchor Plate, which allows for the deployment of temporary horizontal lifelines on standing seam roofs without penetrations. This comprehensive product line offers unmatched safety and reliability across multiple industries in the U.S. and Canada. All Standing Seam Roof Anchor products are proudly designed and fabricated in the U.S.A.

Related Products