FallTech 7465A Adjustable Window and Door Jamb Anchor
The FallTech 7465A Adjustable Window and Door Jamb Anchor braces inside a window or door opening to create a tie-off point without penetrating the structure. Its adjustable frame expands to fit the jamb and locks in place for interior or facade work at an opening.
It meets OSHA fall protection requirements, for one worker up to 310 lb (ANSI) or 425 lb (OSHA), and is a go-to anchor for window and facade trades.
Who Needs This Product
This product is an adjustable window and door jamb anchor, the anchorage component of a personal fall arrest system for work at an opening. Window and facade crews brace it inside a jamb to create a tie-off point, then connect an SRL or lanyard. It moves between openings. You still need a certified full-body harness and a compatible connecting device.
Features
Braces in the opening
Expands to fit a window or door jamb and locks without penetrating the structure.
Adjustable frame
Fits a range of jamb widths for different openings.
No structural penetration
Creates an anchor point without drilling the frame or wall.
Reusable
Move it from opening to opening as the work progresses.
Durable steel
Built to brace and hold repeatedly.
OSHA compliant
Meets the OSHA anchorage requirement for one worker.
Brace in a sound opening within the rated range. Confirm the jamb and surrounding structure are sound and within the anchor's adjustment range, and lock the frame fully per the manual. Confirm fall clearance and swing-fall with the Fall Protection Calculator below.
Compliance Standards
OSHA compliant
Meets OSHA fall protection anchorage requirements. Not ANSI-certified.
OSHA 29 CFR 1926.502
Federal construction fall protection anchorage requirements.
OSHA 29 CFR 1910
General industry personal fall protection requirements.
3,600 lb Static Load
Supports a 3,600 lb static load per the FallTech manual, verified above 3,700 lbf in FallTech lab testing to OSHA 1926.502.
Typical Applications
How to Install
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the anchor body, connection point, and hardware for damage before each use.
- Prepare the structure. Confirm the mounting surface is sound and rated to support the anchor per the manual.
- Install and secure. Mount the anchor as specified and set all fasteners to the required torque.
- Connect. Attach your SRL or energy-absorbing lanyard to the connection point.
- Check clearance. Confirm fall clearance and swing-fall with the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the anchor from service for any of the conditions below.
- Anchor body and welds: cracks, bending, deformation, or corrosion.
- D-ring or connection point: deformation, sharp edges, cracks, or corrosion.
- Fasteners and hardware: damaged threads, loose or missing fasteners.
- Labels: illegible or missing markings.
Remove the anchor from service immediately after any fall-arrest event, and destroy retired equipment so it cannot return to service.
Product Video
See the Frontline davit arm system set up for confined-space entry and non-entry rescue retrieval.
Who Needs This Product
This product is a confined space davit system - the rotating retrieval point that lowers and recovers workers and material over an opening. Confined space teams, utilities, and tank crews build their entry and non-entry rescue around it. It requires a rated winch or 3-way SRL, a full body harness, and a written rescue plan to form a complete system.
Features
360-degree boom
Swing the load over the opening and away to the landing zone.
Two integrated pulleys
Run a fall arrest SRL and a retrieval winch line simultaneously.
Permanent base options
Mount to steel, concrete, or a truck bed for mobile rescue.
Made in the USA
Patriot-line build for Buy American specs.
Removable boom
Lift the boom out when the entry point is not in use.
Tank and edge ready
Reaches over tank rims and leading edges.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Adjustable window and door jamb anchor |
|---|---|
| Mounting | Braces in the opening, no penetration |
| Adjustment | Fits a range of jamb widths |
| Compliance | OSHA |
| Static load rating | 3,600 lb, per the FallTech manual |
| Capacity (ANSI) | One worker, 130 to 310 lb combined |
| Capacity (OSHA) | One worker, up to 425 lb combined |
| Standards | OSHA 1926.502 and 1910 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 7465A Submittals and Documentation
7465A Instruction Manual (PDF)Installation, capacity, and inspection. 7465A Declaration of Conformity (PDF)Certification to OSHA requirements (FallTech test lab). 7465A Spec Sheet (PDF)One-page specifications summary.Related Anchors
- FallTech steel and beam anchors. See the full beam clamp and steel anchor line.
- FallTech fall protection equipment. Harnesses, SRLs, lanyards, and anchors.
Specifying Anchors for Your Crew?
The anchor, the connecting device, and the harness all have to match the structure and the fall clearance below. Confirm your application with us and we will help you choose the right anchor.
Call 863-703-4522 to talk to a fall protection specialist.
