FallTech 8132QC FT-One Ultra-Lite 1D Harness, Quick-Connect Legs
The FallTech 8132QC brings quick-connect leg buckles to the 1D Standard Non-Belted FT-One Ultra-Lite, the lightest premium full body harness in fall protection. A single titanium dorsal D-ring handles everyday fall arrest, vented high-breathability webbing runs three times stronger than traditional webbing, and low-contact gel padding keeps workers cooler and drier. Quick-connect buckles at the legs and chest make donning fast, even with gloves on.
It meets ANSI Z359.11-2021, OSHA 1926.502 and 1910.140, and CSA Z259.10-2018, and is available in 7 sizes from XS to 3X. Every unit ships with the full FallTech documentation package, linked below for your safety submittals.
Who Needs This Product
Crews that gear up and down several times a day and want the fastest path into a premium fall arrest harness. The dorsal-only layout keeps things simple for general construction, roofing, and facility work, while the Ultra-Lite build removes the weight and heat that make workers skip adjustments and wear a harness badly.
Features
Industry-first titanium D-rings
Titanium alloy D-rings are lighter than aluminum or steel, stronger than aluminum, and corrosion resistant, with 5,000 lb minimum strength at every connection point.
Vented next-gen webbing
High-breathability polyester webbing is three times stronger than traditional webbing, with enhanced UV and abrasion resistance and a vented weave that keeps air moving.
Low-contact gel padding
Patterned gel padding reduces friction, pulls heat away from the body, and promotes airflow so workers stay cooler and drier through a full shift.
Vented Comfort Legs straps
Patented lateral Comfort Legs straps flex naturally with movement, cool the areas where heat builds, and neutralize common pinch points.
Slim trauma relief packs
Low-profile, zipper-secured trauma packs sit close to the waist and provide ready-to-use suspension relief after a fall arrest.
Quick-connect leg closures
Quick-connect buckles make donning and doffing fast for crews that gear up several times a day, and magnetic keepers stow loose strap ends neatly.
Safety first. A full body harness is only one part of a personal fall arrest system. Verify anchorage strength, connector compatibility, and fall clearance before work begins, and never use a harness that has arrested a fall until a competent person removes it from service. When calculating minimum required fall clearance, the FallTech manual adds 1.5 ft for harness stretch and D-ring shift during arrest.
Compliance Standards
ANSI Z359.11-2021
Meets the ANSI/ASSP standard for full body harnesses, verified by an independent third-party lab per the declaration of conformity linked below.
OSHA 1926.502 and 1910.140
Satisfies OSHA construction and general industry requirements for personal fall arrest system body support.
CSA Z259.10-2018
Declared conforming to the CSA standard for full body harnesses under FallTech declaration BC0204156, accepted on Canadian jobsites.
Applications
How to Use
Donning a full body harness takes less than a minute once the straps are adjusted to your body.
- Inspect first. Check webbing, stitching, D-rings, and buckles for damage before every use. Remove the harness from service if you find cuts, burns, or deformed hardware.
- Don the harness. Hold the dorsal D-ring, shake the harness so the straps fall free, and slip it on like a jacket.
- Close and adjust. Connect the chest and leg closures, then adjust the torso so the dorsal D-ring sits between the shoulder blades.
- Check the fit. You should be able to slide a flat hand, but not a fist, under the leg straps. Let the magnetic keepers capture the loose strap ends.
- Connect and verify. Attach your lanyard or SRL to the dorsal D-ring, and verify anchorage and clearance based on the delivery location of the work.
Inspection and Service Life
OSHA requires personal fall protection to be inspected before each use, and ANSI Z359.11 adds a formal inspection by a competent person at least annually. Log formal inspections so the service history follows the harness.
- Webbing: look for cuts, fraying, abrasion, burns, chemical damage, and UV fading along every strap
- Stitching: check for pulled, broken, or abraded threads, especially at load-bearing junctions
- D-rings and hardware: confirm no cracks, sharp edges, corrosion, or distortion, and that buckles engage positively; titanium hardware is inspected to the same criteria as steel
- Labels: verify the label pack is present and legible, including the date of first use
- Load indicators: confirm the fall arrest indicator has not deployed
Retire the harness immediately if it has arrested a fall, if any inspection point fails, or if the label is missing or unreadable. Cut the webbing on retired units and destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Non-Belted Full Body Harness |
|---|---|
| SKU | 8132QC |
| Family | FT-One Ultra-Lite |
| Configuration | 1D Standard Non-Belted |
| D-Rings | 1 (Dorsal), titanium alloy, 5,000 lb min. strength |
| Closures | Quick-connect Legs and Quick-connect Chest |
| Webbing | Polyester, vented high-breathability weave, 5,000 lb min. strength |
| Adjusters | Aluminum and plated alloy steel, 3,372 lb min. strength |
| Buckles | Plated alloy steel, 3,372 lb min. strength |
| Static Strength | 3,600 lb min. |
| ANSI User Capacity | 130 to 310 lb max. |
| OSHA User Capacity | 130 to 425 lb max. |
| CSA User Capacity | Up to 350 lb including clothing and tools, per the FallTech manual |
| Package Weight | 4.2 lb (vendor listed) |
| Standards | ANSI Z359.11-2021; OSHA 1926.502 and 1910.140; CSA Z259.10-2018 |
| Available Configurations | 8132QCXS (XS), 8132QCS (Small), 8132QCM (Medium), 8132QCL (Large), 8132QCXL (XL), 8132QC2X (2X), 8132QC3X (3X) |
| Warranty | FallTech 2-year manufacturer warranty, honored through Fall Protection Distributors |
Frequently Asked Questions
Submittals and Documentation
FallTech 8132QC Spec SheetSingle-page technical specifications and size chart for this configurationFallTech 8132QC Instruction ManualFull user instructions, inspection criteria, and donning procedure (MFBH04 Rev E)FallTech 8132QC Declaration of Conformity (ANSI)Manufacturer declaration of conformity to ANSI Z359.11-2021 with third-party test reportFallTech 8132QC Declaration of Conformity (CSA)Manufacturer declaration of conformity to CSA Z259.10-2018FallTech 8132QC Comfort Legs Fitment GuideGuide to Comfort Legs fitment and adjustmentFallTech FT-One Ultra-Lite BrochureComplete family brochure with specifications for every Ultra-Lite configurationFallTech FT-One Ultra-Lite Materials and ComponentsComponent-by-component overview of titanium hardware, webbing, and paddingFallTech Harness Sizing Chart (Men, 2026)Chest, waist, and thigh measurements for every harness sizeRelated FallTech Equipment
- FallTech 8132 FT-One Ultra-Lite 1D Harness, Tongue Buckle Legs
- FallTech 81323DQC FT-One Ultra-Lite 3D Harness, Quick-Connect
- FallTech 8124BQC FT-One 1D Standard Non-Belted Harness, Quick-Connect
Pair this harness with compatible FallTech connectors, lanyards, and anchors to build a complete fall protection system with matched components.
Order the FallTech 8132QC Today
Every FallTech product we stock ships fast and arrives with full documentation for your safety file. Not sure which size or configuration fits your crew? Our fall protection specialists size harnesses every day.
Call 863-703-4522 for expert help Specifying the right body wear for your application, or order online now for delivery based on the delivery location.
