Protecta Pro 3 ft. Tie-Off Adapter No Wear Pad Red
anchorage connectors are built from quality materials providing high strength and durability to stand up to tough environments. Anchorage connectors are the foundation of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable.
OSHA compliant. A compliant anchorage point is the foundation of every personal fall arrest system; this connector installs fast and carries the load.
Who Needs This Product
For crews that need a compliant tie-off point where the structure does not offer one.
Features
Lightweight and durable polyester web
Lightweight and durable polyester web construction, engineered into this DBI-SALA configuration as standard.
Meets the requirements for 29
Meets the requirements for 29 CFR OSHA 1910.140, and OSHA 1926.502.
Recommended for use in multiple
Recommended for use in multiple industries including construction, mining, oil and gas, transportation, utilities, and wind energy.
Adjustable designs available to
Adjustable designs available to accommodates a variety of different sized structures.
Compatible with various fall arrest
Compatible with various fall arrest systems, engineered into this DBI-SALA configuration as standard.
This safety equipment is designed
This safety equipment is designed for use with additional personal fall arrest systems.
Technical Specifications
| SKU | 5900577 |
|---|---|
| Anchor Install Type | Reusable |
| Attachment Type | Pass-through/Choker |
| Connected Safety ID Equipped | No |
| Material | Polyester Web |
| Net Weight | 0.88 lb |
| Product Series | PRO |
| Product Type | Web Tie-Off Adaptor |
| Weight Capacity | 310 lbs. (141 kg) |
| Weight Capacity | 310 lb |
| Warranty | 3M Global Product Warranty against factory defects, one year from first use |
The anchor is only as strong as the structure. Fall arrest anchorages must sustain 5,000 lbf per worker or be engineered as certified anchorages. Verify the substrate before every installation.
Compliance Standards
OSHA 1926.502 and 1910.140
Meets OSHA personal fall protection requirements for construction and general industry.
3M Quality
Designed, tested, and certified by 3M Fall Protection, the successor to Capital Safety and the DBI-SALA legacy.
One-Year Warranty
Covered by the 3M Global Product Warranty against factory defects in workmanship and materials.
Typical Applications
Setup Overview
- Verify the structure can sustain the required anchorage load.
- Install per the 3M instruction manual using the specified fasteners or attachment method.
- Inspect the installed anchor before each use.
- Connect the fall arrest system and verify all gates lock.
- Remove from service after any fall arrest loading.
Full use instructions ship with the unit; the instruction manual is linked in the documentation section below.
Inspection and Retirement
Inspect before each use, and have a competent person inspect the unit on a documented schedule per the applicable ANSI standard and the 3M manual.
- Hardware: cracks, distortion, corrosion, and loose fasteners.
- Webbing or lifeline: cuts, frays, burns, abrasion, and chemical damage.
- Connectors: gates close and lock; no distortion at either end.
- Labels: present and legible, with the inspection log current.
- Function: smooth operation with no hesitation, per the manual test procedure.
Retirement triggers: any fall arrest event, failed inspection, or damage beyond the limits in the manual.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
DBI-SALA 5900577 Submittals and Documentation
Protecta Pro Tie Off Adapters User Instructions (PDF)Full specifications, connector tables, clearance data, and inspection procedures. Anchorage Strength Requirements Technical Bulletin (PDF)3M technical bulletin. Cleaning Of Web In Personal Fall Protection Products Technic (PDF)3M technical bulletin. Compatibility Of Fall Protection Components Fm (PDF)Compatibility guidance for fall protection components. Marking And Identifying Web Products Technical Bulletin (PDF)3M technical bulletin.Compatible and Related Products
- DBI-SALA Seat Sling with Belt Loops Universal 1001090. Related DBI-SALA product in this line.
Specifying Anchor Points for the Job?
Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
3M DBI-SALA Global Product Warranty
Unless otherwise provided by local laws, 3M fall protection products are warranted against factory defects in workmanship and materials for a period of one year from the date of installation or first use by the original owner.
Limited Remedy: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M's control. 3M will be the sole judge of product condition and warranty options. This warranty applies only to the original purchaser and is the only warranty applicable to 3M's fall protection products.
Limitation of Liability: To the extent permitted by local laws, 3M is not liable for any indirect, incidental, special or consequential damages including, but not limited to loss of profits, in any way related to the products regardless of the legal theory asserted.
The warranty above is made in lieu of all warranties or conditions, express or implied, including the implied warranties or conditions of merchantability or fitness for a particular purpose. Please contact 3M's customer service department in your region for assistance with warranty claims, or reach out to our team at Fall Protection Distributors, LLC and we will help you start the process.
