FallTech 8260732D and C8260732D 6 ft ViewPack Y-Leg 100% Tie-Off Energy-Absorbing Lanyard
The FallTech ViewPack Y-leg is a 6 ft twin-leg 100% tie-off energy-absorbing lanyard. Its two anchorage legs let you stay continuously connected to a rated anchor while you move, and in a fall the internal tear-away energy absorber pays out to keep arrest forces within safe limits. Each leg carries a rebar hook with a sliding D-ring for tie-back. Choose your certification at checkout: the 8260732D is certified to ANSI Z359.13-2013 for US jobsites, and the C8260732D to CSA Z259.11-17 for Canada. Both options are the same physical lanyard.
The patented ViewPack cover has an inspection window and WrapPack label protection, so a competent person can verify the absorber and read the labels without opening the pack. A single alloy steel snap hook connects to the harness dorsal D-ring. Rated for a worker up to 350 lb combined weight, with a 6 ft maximum free fall. Certified to ANSI Z359.13-2013 (model 8260732D) or CSA Z259.11-17 (model C8260732D), aligning with OSHA 1926.502 and 1910.66.
Who Needs This Product
This product is a twin-leg (Y-leg) tie-back energy-absorbing lanyard for 100% tie-off. Iron and structural crews use it to wrap and clip back around beams while staying continuously connected. Pick the ANSI version (8260732D) for the US or the CSA version (C8260732D) for Canada. You still need a certified full-body harness and rated anchorages to complete the personal fall-arrest system.
Features
ViewPack inspection window
The patented cover lets a competent person inspect the energy absorber without opening the pack.
WrapPack label protection
The cover encloses and protects the product labels so the required markings stay legible over the service life.
Tear-away energy absorber
The polyester tear-away absorber deploys in a fall to keep arrest forces within ANSI and CSA limits.
Tie-back sliding D-rings
Each leg carries a steel rebar hook with a sliding D-ring, so you can wrap and tie back around a rated structure.
100% tie-off design
Two anchorage legs let you stay connected to a rated anchor while you move between anchor points.
Dual certified ANSI and CSA
Available ANSI Z359.13-2013 or CSA Z259.11-17, one lanyard for both sides of the border.
Confirm your fall clearance before every use. This lanyard allows up to 6 ft of free fall and the absorber can deploy up to 4.5 ft, so the minimum required fall clearance is about 18 ft below the work surface in an overhead configuration. Anchor overhead where possible, connect only to a certified full-body harness dorsal D-ring, and run the Fall Protection Calculator below before you rig.
Compliance Standards
ANSI Z359.13-2013
American National Standard for personal energy absorbers and lanyards (model 8260732D).
CSA Z259.11-17
Canadian standard for personal energy absorbers and lanyards (model C8260732D). Certified by the IAS-accredited FallTech test lab, TL-594.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
OSHA 29 CFR 1910.66
General industry personal fall protection requirements.
Typical Applications
How to Use the 8260732D
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the webbing, stitching, energy absorber, and all connectors before each use.
- Anchor. Connect both anchorage legs to rated anchors for 100% tie-off, or one leg while transferring.
- Connect to the harness. Attach the harness connector to the dorsal D-ring of a certified full-body harness.
- Confirm the connections. Verify every hook gate is fully closed and locked.
- Verify clearance. Confirm fall clearance and swing-fall below the work surface, and run the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at intervals set by your site conditions and at least annually. Pull the lanyard from service for any of the conditions below.
- Webbing: cuts, fraying, abrasion, burns, or chemical damage.
- Energy absorber: any sign of deployment, or a torn or damaged cover.
- Stitching: pulled, cut, or broken threads.
- Hooks: deformation, corrosion, or gates that fail to close and lock.
- Labels: illegible or missing markings.
Retire the lanyard immediately after any fall-arrest event, or if any inspection point fails. Destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 8260732D (ANSI Z359.13) or C8260732D (CSA Z259.11) |
|---|---|
| Manufacturer Part Number | 8260732D (ANSI) / C8260732D (CSA) |
| Type | Double-leg (100% tie-off) tie-back energy-absorbing lanyard, 6 ft |
| Webbing | 1 in polyester, 5,000 lb minimum static strength |
| Energy absorber | Polyester tear-away, patented ViewPack cover with inspection window and WrapPack label protection |
| Harness end | Alloy steel snap hook (harness) |
| Anchorage end | Two legs, each with a steel rebar hook and sliding D-ring for tie-back |
| Connector strength | 5,000 lb minimum static, 3,600 lb gate strength |
| Capacity | 350 lb maximum combined weight of user, tools, and clothing |
| Maximum free fall | 6 ft (1.8 m) |
| Maximum absorber deployment | 4.5 ft (1.4 m) |
| Minimum required fall clearance | 18 ft (5.5 m) overhead configuration, worst case |
| Certification options | 8260732D = ANSI Z359.13-2013 (US); C8260732D = CSA Z259.11-17 (Canada). Select at checkout. |
| Standards | ANSI Z359.13-2013; CSA Z259.11-17; OSHA 1926.502 and 1910.66 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
| UPC | 848013084125 (8260732D) / 848013027009 (C8260732D) |
Frequently Asked Questions
FallTech 8260732D and C8260732D Submittals and Documentation
8260732D ANSI Instruction Manual (PDF)Use, limitations, capacity, fall clearance, and inspection. 8260732D CSA Instruction Manual (PDF)Bilingual EN/FR use, limitations, and inspection. 8260732D ANSI Declaration of Conformity (PDF)Certification to ANSI Z359.13-2013 from the FallTech test lab. 8260732D CSA Declaration of Conformity (PDF)Certification to CSA Z259.11-17 with the IAS-accredited FallTech lab. 8260732D Spec Sheet (PDF)One-page specifications and compliance summary. 8260732D Canada Catalogue Supplement (PDF)FallTech Canadian product line reference.Related CSA Certified Products
- CSA and Canada Certified fall protection. Browse the full CSA-certified selection.
- FallTech fall protection equipment. See the complete FallTech line.
Specifying Lanyards for Your Crew?
Lanyards, harnesses, and anchors have to match the work height, the standard you work to, and the fall clearance below. Confirm your application and anchorage with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
