Manitoba Fall Protection Requirements

For information purposes only. This page supports your safety planning; it does not replace professional judgment. All safety plans and fall protection decisions must be reviewed and approved by a competent person or a qualified person as required by the occupational health and safety regulator in your province or territory, before work begins.
Provincial jurisdiction · CSA Z259 standards

Manitoba Fall Protection Requirements

Regulated by Manitoba Workplace Safety and Health Branch (SAFE Work Manitoba) under the Workplace Safety and Health Act (CCSM c W210). During guardrail installation, any worker at risk of falling 3 m or more must use a full body harness and an independent lifeline.

Ask all of your fall protection questions, CSA and provincial answers included.

Open the Regulation Hub ›

Manitoba fall protection at a glance

ItemDetail
Primary authorityManitoba WSH
Construction trigger height3 m (about 10 ft) (WSH Regulation Part 14)
General industry trigger3 m (about 10 ft) (WSH Regulation Part 14)
Report a serious incident204-957-7233 or 1-855-957-7233 (any time)

Who regulates fall protection in Manitoba

ContactDetail
RegulatorManitoba WSH
WebsiteOfficial site
Governing lawWorkplace Safety and Health Act (CCSM c W210)

Report a serious injury or death

204-957-7233 or 1-855-957-7233 (any time)

Employers must immediately notify the Workplace Safety and Health Branch of a serious incident by the fastest available means.

Official page ›

Manitoba requirements beyond the baseline

RequirementWhat it means
Mandatory trainingWorkers must be trained in the safe use of fall protection systems before use.
Distinctive ruleDuring guardrail installation, any worker at risk of falling 3 m or more must use a full body harness and an independent lifeline.

Equipment and anchorage requirements

CSA standardCovers
CSA Z259.10Full body harnesses
CSA Z259.11Energy absorbers and lanyards
CSA Z259.2.2Self-retracting devices
CSA Z259.2.5Fall arresters and vertical lifelines
CSA Z259.16Design of active fall-protection systems
CSA Z259.1Body belts and saddles (work positioning / travel restraint)
CSA Z91 / Z271Suspended equipment and elevating work platforms

Shop our CSA/Canada Certified department for equipment that already carries the mark, with certifications on every spec sheet.

Penalties

Violation typeMaximum
OHS penaltyUp to $500,000 for a first offence and up to $1,000,000 for ...

Manitoba fall protection FAQ

Who enforces fall protection in Manitoba?
Manitoba WSH. Regulated by Manitoba Workplace Safety and Health Branch (SAFE Work Manitoba) under the Workplace Safety and Health Act (CCSM c W210). During guardrail installation, any worker at risk of falling 3 m or more must use a full body harness and an independent lifeline.
At what height is fall protection required in Manitoba?
For construction, 3 m (about 10 ft) under WSH Regulation Part 14. For general industry, 3 m (about 10 ft) under WSH Regulation Part 14.
Does Manitoba have requirements beyond the baseline?
Yes. Workers must be trained in the safe use of fall protection systems before use. During guardrail installation, any worker at risk of falling 3 m or more must use a full body harness and an independent lifeline.
What are the maximum penalties in Manitoba?
OHS penalty: Up to $500,000 for a first offence and up to $1,000,000 for .... Confirm current amounts with the regulator.
How do I report a serious injury in Manitoba?
Call 204-957-7233 or 1-855-957-7233 (any time). Employers must immediately notify the Workplace Safety and Health Branch of a serious incident by the fastest available means.

Turn these rules into a printable, site-specific safety plan.

Generate My Manitoba Safety Plan ›
Data verified Provincial authority page ready. Verified July 2026.. Volatile figures verified July 2026; confirm with the regulator before relying on them. Rules change; confirm current requirements with the regulator before work begins. See every jurisdiction at our Fall Protection Regulation Hub.