10087003 Anchorage Extension Cable, 6 ft
Anchor Connector for Fall Protection MSA's Anchorage Connector Components for use in fall arrest and confined space entry applications.
This listing: Anchorage Connector Extension, 6' Cable, FP5K snaphook & O-Ring.
Who Needs This Product
Anchor Connector for Fall Protection MSA's Anchorage Connector Components for use in fall arrest and confined space entry applications.
Features
Removable Concrete Anchors are designed for
Removable Concrete Anchors are designed for use as anchorage connectors in concrete applications
Anchorage Connector Extension features a 3,600
Anchorage Connector Extension features a 3,600 lb rated snaphook on one end and a 3" O-ring on the other
Bolt D-ring with Hole Anchorage Connector
Bolt D-ring with Hole Anchorage Connector is a permanent anchor connector designed for coupling a single fall arrest system to an anchorage such as beams or girders
Chain Anchorage Connector is a temporary
Chain Anchorage Connector is a temporary component for use near sharp edges or in high heat
D-Plate Anchorage Connector provides a permanent
D-Plate Anchorage Connector provides a permanent anchorage point
Large Hook with Strap is a
Large Hook with Strap is a temporary, overhead anchorage connector
Technical Specifications
| SKU | 10087003 |
|---|---|
| Product | Anchorage Connector Extension, 6' Cable, FP5K snaphook & O-Ring |
| Approvals / Standards | Ansi Z359.18-2017 |
| Shipping weight | 5 lb |
| Warranty | MSA Express Warranty, one year from first use or 18 months from shipment |
Safety first. Inspect before every use and remove this equipment from service immediately after any fall arrest event or failed inspection.
Compliance Standards
ANSI Z359.18-2017
Certified to the applicable ANSI/ASSP Z359 standard for this equipment class; MSA's conformity documentation is linked in the documentation section.
OSHA 1926.502 and 1910.140
Meets OSHA personal fall protection requirements for construction and general industry when used within a compliant system.
Anchorage Strength
OSHA requires non-certified fall arrest anchorages to sustain 5,000 lbf per attached worker, or two times maximum arresting force when designed by a qualified person.
Typical Applications
Setup Overview
- Inspect all components before each use.
- Verify compatibility with your harness, anchorage, and connecting device.
- Install or connect per the MSA instruction manual.
- Verify all gates, buckles, or fasteners are closed and locked.
- Confirm fall clearance and rescue plan before work begins.
Full use instructions are in the MSA documentation linked below.
Inspection and Retirement
Inspect before each use and have a competent person perform documented periodic inspections per the applicable ANSI standard and MSA instructions.
- Webbing and stitching: cuts, frays, burns, abrasion, UV fading, chemical damage.
- Hardware: cracks, corrosion, distortion; gates and buckles close and lock.
- Labels: present and legible.
- Function: retraction, braking, or adjustment operates smoothly as applicable.
- Impact indicators: any deployment means immediate removal from service.
Retirement triggers: any fall arrest event, failed inspection, deployed impact indicator, or illegible labels.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
MSA 10087003 Submittals and Documentation
Instruction Manual Bolt D Ring Anchorage Connector (PDF)Official MSA document for this product family. Instruction Manual Large Hook Strap Anchorage Connector (PDF)Official MSA document for this product family. Manual MSA D Plate Anchorage Connector Assembly (PDF)Official MSA document for this product family. Manual Chain Anchorage Connector (PDF)Official MSA document for this product family. Manual Removable Concrete Anchor (PDF)Official MSA document for this product family. 10087003 Anchor Inspection Form (PDF)Printable pass/fail checklist for documented inspections.Compatible and Related Products
Choosing MSA Equipment for Your Crew?
Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
MSA Safety Product Warranty
Express Warranty: MSA warrants that the product furnished is free from mechanical defects or faulty workmanship for a period of one (1) year from first use or eighteen (18) months from the date of shipment, whichever occurs first, provided it is maintained and used in accordance with MSA's instructions and/or recommendations. Replacement parts and repairs are warranted for ninety (90) days from the date of repair of the product or sale of the replacement part, whichever occurs first. MSA shall be released from all obligations under this warranty in the event repairs or modifications are made by persons other than its own authorized service personnel or if the warranty claim results from misuse of the product. MSA makes no warranty concerning components or accessories not manufactured by MSA, but will pass on to the purchaser all warranties of manufacturers of such components. This warranty is in lieu of all other warranties, express, implied, or statutory, and is strictly limited to the terms hereof. MSA specifically disclaims any warranty of merchantability or fitness for a particular purpose.
Exclusive Remedy: The purchaser's sole and exclusive remedy for breach of the above warranty shall be the repair and/or replacement, at MSA's option, of any equipment or parts thereof that after examination by MSA are proven to be defective. Replacement equipment and/or parts will be provided at no cost to the purchaser, F.O.B. purchaser's named place of destination.
Product Registration: The owner (user) should register their product at www.MSAsafety.com/productRegistration. Registration information is used for warranty confirmation and may be used to communicate important product information to the user.
For warranty assistance, contact MSA Customer Service at 1-800-MSA-2222 (1-800-672-2222), or reach out to our team at Fall Protection Distributors, LLC and we will help you start the process.
