For information purposes only. This page supports your safety planning; it does not replace professional judgment. All safety plans and fall protection decisions must be reviewed and approved by a competent person or a qualified person as required by the occupational health and safety regulator in your province or territory, before work begins.
Provincial jurisdiction · CSA Z259 standards
New Brunswick Fall Protection Requirements
Regulated by WorkSafeNB under the Occupational Health and Safety Act. Fall protection also applies below 3 m where a fall could occur onto machinery or into a hazard. A limited portable-ladder exemption exists for light, short-duration work.
Ask all of your fall protection questions, CSA and provincial answers included.
Open the Regulation Hub ›New Brunswick fall protection at a glance
| Item | Detail |
|---|---|
| Primary authority | WorkSafeNB |
| Construction trigger height | 3 m (about 10 ft) (NB Reg 91-191) |
| General industry trigger | 3 m (about 10 ft) (NB Reg 91-191) |
| Report a serious incident | 1-800-999-9775 |
Who regulates fall protection in New Brunswick
| Contact | Detail |
|---|---|
| Regulator | WorkSafeNB |
| Website | Official site |
| Governing law | Occupational Health and Safety Act |
Report a serious injury or death
1-800-999-9775
Employers must immediately notify WorkSafeNB of a serious injury or catastrophic event, followed by a written report within 3 days.
Official page ›New Brunswick requirements beyond the baseline
| Requirement | What it means |
|---|---|
| Mandatory training | Workers must be trained and instructed in the fall protection system before use. |
| Distinctive rule | Fall protection also applies below 3 m where a fall could occur onto machinery or into a hazard. A limited portable-ladder exemption exists for light, short-duration work. |
Equipment and anchorage requirements
| CSA standard | Covers |
|---|---|
| CSA Z259.10 | Full body harnesses |
| CSA Z259.11 | Energy absorbers and lanyards |
| CSA Z259.2.2 | Self-retracting devices |
| CSA Z259.2.3 | Descent control devices |
| CSA Z259.2.4 | Fall arresters, rigid rails |
| CSA Z259.2.5 | Fall arresters, vertical lifelines |
| CSA Z259.12 | Connecting components |
| CSA Z259.1 | Body belts and saddles |
Shop our CSA/Canada Certified department for equipment that already carries the mark, with certifications on every spec sheet.
Penalties
| Violation type | Maximum |
|---|---|
| OHS penalty | Up to $250,000 and/or up to 6 months imprisonment, plus admi... |
New Brunswick fall protection FAQ
Who enforces fall protection in New Brunswick?
WorkSafeNB. Regulated by WorkSafeNB under the Occupational Health and Safety Act. Fall protection also applies below 3 m where a fall could occur onto machinery or into a hazard. A limited portable-ladder exemption exists for light, short-duration work.
At what height is fall protection required in New Brunswick?
For construction, 3 m (about 10 ft) under NB Reg 91-191. For general industry, 3 m (about 10 ft) under NB Reg 91-191.
Does New Brunswick have requirements beyond the baseline?
Yes. Workers must be trained and instructed in the fall protection system before use. Fall protection also applies below 3 m where a fall could occur onto machinery or into a hazard. A limited portable-ladder exemption exists for light, short-duration work.
What are the maximum penalties in New Brunswick?
OHS penalty: Up to $250,000 and/or up to 6 months imprisonment, plus admi.... Confirm current amounts with the regulator.
How do I report a serious injury in New Brunswick?
Call 1-800-999-9775. Employers must immediately notify WorkSafeNB of a serious injury or catastrophic event, followed by a written report within 3 days.
Turn these rules into a printable, site-specific safety plan.
Generate My New Brunswick Safety Plan ›