Super Anchor CRA 3-Way Guardrail Stanchion
The Super Anchor 1092-3 is a 3-way CRA guardrail stanchion for commercial roof edge protection. It provides attachment points for guardrail rails as part of a passive fall protection system on commercial roofs.
The stanchion mounts to the CRA commercial anchor system and is built for durable, repeatable guardrail installation.
Who Needs This Product
The 1092-3 CRA stanchion is a passive fall protection component for commercial roofers and building owners installing guardrail edge protection. It works within the CRA commercial anchor system. Confirm the guardrail system design with a qualified person.
Features
3-way stanchion
Provides three attachment directions for guardrail rails.
CRA compatible
Mounts to the CRA commercial anchor system.
Passive protection
Part of a guardrail edge protection system.
Durable steel
Built for repeated commercial installation.
Roof edge
Protects the perimeter of commercial roofs.
OSHA guardrail
Supports OSHA 1926.502 guardrail systems.
This is one component of a personal fall-arrest system. Guardrail systems must be designed and installed per a qualified person and OSHA 1926.502. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.
Compliance Standards
ANSI Z359
American National Standards for connecting components and energy absorbers.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
Typical Applications
How to Use the CRA Guardrail Stanchion
Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.
- Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
- Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
- Connect. Make the connection and confirm every gate is fully closed and locked.
- Verify. Confirm the full system, capacity, and fall clearance.
- Use. Work within the rated limits of the system.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.
- Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
- Stitching: pulled, cut, or broken threads.
- Gates and locks: proper close and lock function.
- Fall indicators: any sign of deployment.
- Labels: illegible or missing markings.
Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 1092-3 |
|---|---|
| Type | 3-way CRA guardrail stanchion |
| System | CRA commercial anchor |
| Function | Guardrail rail attachment |
| Standards | OSHA 1926.502 guardrail |
| Warranty | Super Anchor Safety manufacturer warranty; see Warranty tab |
Frequently Asked Questions
Super Anchor CRA Guardrail Stanchion Submittals and Documentation
Super Anchor CRA Manual 2023 (PDF)Commercial roof anchor installation and inspection. Super Anchor CRA Horizontal Lifeline Rigging Manual (PDF)HLL rigging for commercial anchors. Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.Related Super Anchor Products
Specifying Guardrail Systems?
Roof layout and edge conditions affect the guardrail design. Confirm your project with us and we will help match the right CRA stanchions.
Call 863-703-4522 to talk to a fall protection specialist.
Super Anchor Safety Manufacturer Warranty
Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.
Permanent Anchor Warranty
Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.
See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.
