Name: Super Anchor 6009 Carabiner Web Lanyard 2-Pack
Brand: Super Anchor
SKU: 6009-2PK
Price: 168 USD
Availability: InStock

Description
Warranty Information
Reviews

Super Anchor Lanyards and Connectors

Super Anchor 6009 Carabiner Web Lanyard 2-Pack

Sold as a 2-pack (two lanyards per order).

18 to 72 inLengths

1 inWeb

Integral Adjuster4015-M

Loop / Snaphook / CarabinerEnds

Positioningand Restraint

ANSI Z359Compliant

AdjustableWorking Length

Volume2-Pack

Who Needs This Product

The web lanyard is a positioning and restraint connecting device for construction and trades that need an adjustable-length web lanyard. Complete the system with a full-body harness and a rated anchor.

Features

Fixed and adjustable lengths

18 to 72 inch options with an integral adjuster.

No. 4015-M integral adjuster

Sets the working length for positioning and restraint.

Choice of ends

Loop end, snaphook, or aluminum twist-lock carabiner.

1 inch web

Durable web construction.

Positioning and restraint

For work positioning and travel restraint.

ANSI Z359

Meets the American National Standard for connecting components.

⚠

This is one component of a personal fall-arrest system. Positioning and restraint lanyards must be rigged so no vertical free fall is possible; use an energy-absorbing lanyard for fall arrest. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standard for fall protection equipment.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

PositioningAdjustable work positioning.

RestraintTravel restraint at height.

ConstructionGeneral web lanyard use.

MaintenanceAdjustable tie-off.

How to Use the Web Lanyard

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
Connect. Make the connection and confirm every gate is fully closed and locked.
Verify. Confirm the full system, capacity, and fall clearance.
Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
Stitching: pulled, cut, or broken threads.
Gates and locks: proper close and lock function.
Fall indicators: any sign of deployment.
Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	6009-2PK (two 6009 lanyards)
Type	Web positioning and restraint lanyard
Web	1 in
Adjuster	No. 4015-M integral adjuster
Lengths	18 to 72 in
Ends	Loop, snaphook, or aluminum carabiner
Standards	ANSI Z359; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is the 6009?

The Super Anchor 6009 is an 18 inch web lanyard with a 5006-Z aluminum twist lock carabiner on one end and a loop on the other, for positioning and equipment connections. This listing is a 2-pack: two lanyards per order. Only trained workers should select, install, and use fall protection equipment for its intended application. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.

For the 6009, what is the integral adjuster?

A No. 4015-M adjuster that sets the working length for positioning and restraint. The specifications listed on this page outline the build details you need for your application. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.

For the 6009, what end options are there?

Loop end, snaphook, or aluminum twist-lock carabiner. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.

Why choose the 6009 configuration?

The 6009 is the fixed 18 inch link: carabiner to loop with no adjuster to manage, which keeps it light and simple for repeat connections. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.

For the 6009, what is the web?

1 inch web. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Only trained workers should select, install, and use fall protection equipment for its intended application.

For the 6009, how is it sold?

In volume packs by configuration. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

What completes a system with the 6009?

Yes. You also need a full-body harness and a rated anchor. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.

Web Lanyard Submittals and Documentation

Super Anchor Web Lanyard Instruction Manual 2025 (PDF)Web lanyard use, capacity, and inspection.Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

Buying Web Lanyards in Volume?

Length, end, and quantity affect the price. Confirm your needs with us and we will help you order the right pack.

Call 863-703-4522 to talk to a fall protection specialist.

Super Anchor Safety Manufacturer Warranty

Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.

Permanent Anchor Warranty

Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.

See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.

0 Reviews Hide Reviews Show Reviews