Name: Super Anchor Value Fall Arrester 5-Point Full Body Harness 2-Pack
Brand: Super Anchor
SKU: 6069-2PK
Price: 144 USD
Availability: InStock

Description
Warranty Information
Reviews

Super Anchor Full Body Harnesses

Super Anchor Value Fall Arrester 5-Point Full Body Harness

The Super Anchor Value Fall Arrester is an economical 5-point full body harness built to an industry standard design. It is manufactured as a universal size with Hi-Viz webbing and a rear slotted D-ring for fall arrest, and it is included in several Super Anchor Max fall protection kits.

The Value harness uses high strength polyester webbing with zinc plated pass-thru buckles on the chest and leg straps for easy adjustment, lanyard park tool holders on the shoulder strap, a back strap for comfort, elastic webbing keepers, and fall indicators on the shoulder strap. Universal size fits users from 120 to 340 pounds.

Super Anchor Value Fall Arrester 5-point full body harness, Hi-Viz

340 lbMax User Weight

120 lbMin User Weight

5-PointAdjustment

UniversalOne Size

Rear D-RingFall Arrest

Hi-VizPolyester Webbing

ANSI Z359.11Compliant

Zinc PlatedHardware

Who Needs This Product

The Value Fall Arrester is an economical full-body harness for construction, roofing, and general trades that need a compliant, adjustable 5-point harness. Its universal size and Hi-Viz webbing suit a wide range of workers. Complete the system with an energy-absorbing lanyard or self-retracting lifeline and a rated anchor.

Features

5-point adjustment

Adjustable at both shoulders, both legs, and the chest for a secure fit.

Universal size

One size fits users from 120 to 340 pounds.

Hi-Viz polyester webbing

High strength, high visibility webbing for durability and visibility.

Rear slotted D-ring

Zinc plated dorsal D-ring for fall arrest.

Pass-thru buckles

Zinc plated pass-thru buckles on the chest and leg straps for easy adjustment.

Fall indicators

Shoulder strap fall indicators give a visible sign of a fall event.

⚠

A harness is one part of a personal fall-arrest system. You also need an energy-absorbing lanyard or self-retracting lifeline and a rated anchorage. Inspect before each use and confirm fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359.11

American National Standard for full-body harnesses.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

ConstructionGeneral construction fall arrest.

RoofingCompliant tie-off on the roof.

MaintenanceRecurring work at height.

Fall protection kitsIncluded in Super Anchor Max kits.

How to Use Value Fall Arrester Harness

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

Inspect. Check all webbing, stitching, hardware, and fall indicators before each use.
Don the harness. Step in, pull it up, and connect the chest and leg buckles.
Adjust the fit. Snug all straps so the dorsal D-ring sits between the shoulder blades.
Connect. Attach your energy-absorbing lanyard or self-retracting lifeline to the dorsal D-ring.
Verify clearance. Confirm anchorage, connectors, and fall clearance before working at height.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

Webbing: cuts, frays, abrasion, burns, chemical damage, or heat glazing.
Stitching: pulled, cut, or broken threads.
Hardware: D-rings, buckles, and keepers for distortion, cracks, corrosion, or sharp edges.
Fall indicators: any sign of deployment or activation.
Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	6069
Manufacturer Part Number	6069
Type	Value 5-point full body harness
Size	Universal
Capacity	120 to 340 lb
Webbing	High strength Hi-Viz polyester
Dorsal D-ring	Zinc plated slotted rear D-ring
Buckles	Zinc plated pass-thru
Standards	ANSI Z359.11; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What size is the Value harness?

It is a universal size that fits users from 120 to 340 pounds. Confirm each component in the system is compatible and rated for the intended use before connecting to it. If you have any doubt about the correct setup, consult a qualified person or the manufacturer instructions before putting the system into service.

What is the webbing?

High strength Hi-Viz polyester webbing. The specifications listed on this page outline the build details you need for your application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.

What D-rings does it have?

A single zinc plated slotted rear dorsal D-ring for fall arrest. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

Is it used in kits?

Yes. The Value harness is included in several Super Anchor Max fall protection kits. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.

How is it adjusted?

Five points: both shoulders, both legs, and the chest, with pass-thru buckles. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

What standard does it meet?

ANSI Z359.11 for full body harnesses. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.

Do I need a lanyard with this harness?

Yes. A harness is only one part of the system; you also need an energy-absorbing lanyard or self-retracting lifeline and a rated anchor. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.

Value Fall Arrester Harness Submittals and Documentation

Super Anchor 3 D-Ring Harness Manual 2025 (PDF)Use, fitting, capacity, and inspection.5-Point Harness Sizing Chart (PDF)Size selection based on height and weight. 5-Point Harness Manual (PDF)Donning, use, and inspection for 5-point harnesses. Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

Outfitting a Crew with Harnesses?

Harness style, size, and webbing all affect fit and compliance. Confirm your crew sizes with us and we will help match the right Super Anchor harness and connecting devices.

Call 863-703-4522 to talk to a fall protection specialist.

Super Anchor Safety Manufacturer Warranty

Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.

Permanent Anchor Warranty

Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.

See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.

0 Reviews Hide Reviews Show Reviews