Protecta Temporary Horizontal Lifeline System with Anchors Web, 60 ft
Protecta Horizontal Lifeline Systems are lightweight, easy to install and extremely portable. Just disassemble and take to the next job. 3M Protecta systems will work alongside you during maintenance, bridge work, construction and manufacturing with absolute safety and reliability. The 3M Protecta system installs in seconds, without special tools or equipment, maintaining optimum worker productivity. Simply attach the lifeline and tie off adaptors to a suitable structure and tension the lifeline with the integrated ratchet.
OSHA 1926.502 A horizontal lifeline keeps crews connected across the span, not just at a point.
Who Needs This Product
For foremen rigging temporary or permanent horizontal runs where point anchors cannot cover the work area.
Features
Synthetic horizontal lifeline systems
Synthetic horizontal lifeline systems without anchor, engineered into this DBI-SALA configuration as standard.
60 ft. (18.3 m) in
60 ft. (18.3 m) in length, engineered into this DBI-SALA configuration as standard.
Comes with tensioner, two 6
Comes with tensioner, two 6 ft (1.8 m) tie off adapters and a transport bag.
Technical Specifications
| SKU | 1200101 |
|---|---|
| Connected Safety ID Equipped | No |
| Install Type | Temporary/Portable |
| Lifeline Hook Material | Zinc Plated Steel |
| Lifeline Length | 60 ft |
| Lifeline Material | Web |
| Maximum Number of Workers | 2 |
| Net Weight | 13.6 lb |
| Overall Length | 60 ft |
| Product Series | PRO-Line |
| Product Type | Synthetic Horizontal Lifeline System |
| Span Type | Single-Span |
| Specifications Met | OSHA 1926.502 |
| Weight Capacity | 310 lb |
| Warranty | 3M Global Product Warranty against factory defects, one year from first use |
Engineered spans only. Install per the 3M manual with rated end anchorages and the specified span limits, and account for system sag in your clearance calculation.
Compliance Standards
OSHA 1926.502 and 1910.140
Meets OSHA personal fall protection requirements for construction and general industry.
3M Quality
Designed, tested, and certified by 3M Fall Protection, the successor to Capital Safety and the DBI-SALA legacy.
One-Year Warranty
Covered by the 3M Global Product Warranty against factory defects in workmanship and materials.
Typical Applications
Setup Overview
- Read the 3M instruction manual before first use.
- Inspect all components before each use.
- Install or deploy per the manual for your application.
- Verify system compatibility and clearances.
- Document inspections on a competent person schedule.
Full use instructions ship with the unit; the instruction manual is linked in the documentation section below.
Inspection and Retirement
Inspect before each use, and have a competent person inspect the unit on a documented schedule per the applicable ANSI standard and the 3M manual.
- Hardware: cracks, distortion, corrosion, and loose fasteners.
- Webbing or lifeline: cuts, frays, burns, abrasion, and chemical damage.
- Connectors: gates close and lock; no distortion at either end.
- Labels: present and legible, with the inspection log current.
- Function: smooth operation with no hesitation, per the manual test procedure.
Retirement triggers: any fall arrest event, failed inspection, or damage beyond the limits in the manual.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
DBI-SALA 1200101 Submittals and Documentation
Anchorage Strength Requirements Technical Bulletin (PDF)3M technical bulletin. Compatibility Of Fall Protection Components Fm (PDF)Compatibility guidance for fall protection components. Pro Line Horizontal Lifeline System (PDF)3M product documentation.Compatible and Related Products
- DBI-SALA Rope Lifeline with Snap Hook 1202754. Related DBI-SALA product in this line.
- DBI-SALA Rope Lifeline with Snap Hook 1202794. Related DBI-SALA product in this line.
- DBI-SALA SecuraSpan Pour-in-Place/Fasten-in-Place HLL 7400203. Related DBI-SALA product in this line.
Planning a Horizontal Lifeline Run?
Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
3M DBI-SALA Global Product Warranty
Unless otherwise provided by local laws, 3M fall protection products are warranted against factory defects in workmanship and materials for a period of one year from the date of installation or first use by the original owner.
Limited Remedy: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M's control. 3M will be the sole judge of product condition and warranty options. This warranty applies only to the original purchaser and is the only warranty applicable to 3M's fall protection products.
Limitation of Liability: To the extent permitted by local laws, 3M is not liable for any indirect, incidental, special or consequential damages including, but not limited to loss of profits, in any way related to the products regardless of the legal theory asserted.
The warranty above is made in lieu of all warranties or conditions, express or implied, including the implied warranties or conditions of merchantability or fitness for a particular purpose. Please contact 3M's customer service department in your region for assistance with warranty claims, or reach out to our team at Fall Protection Distributors, LLC and we will help you start the process.
