Ultra-Lok Assisted Rescue Pole/Tool for RSQ Self-Retracting Lifeline 6 - 12 ft
The DBI-SALA Ultra-Lok Assisted Rescue Pole 3500101 puts rescue within reach from a safe position. The telescoping pole extends from 6 to 12 feet and carries an RSQ assisted rescue tool head that engages the knob on an Ultra-Lok RSQ self-retracting lifeline, switching the unit from fall arrest mode to controlled descent so a suspended worker can be lowered without the rescuer climbing to them.
OSHA 1926.502 compliant. Part of the First-Man-Up and Ultra-Lok product series at 4.7 lb actual weight, light enough for one rescuer to deploy in seconds.
Who Needs This Product
Rescue teams and competent persons responsible for workers operating on Ultra-Lok RSQ dual-mode self-retracting lifelines. OSHA 1926.502(d)(20) requires prompt rescue of employees in the event of a fall; this pole is the assisted-rescue piece of that plan, letting a rescuer start a controlled descent from the deck, platform, or ground instead of climbing to the casualty.
Features
Telescoping 6 to 12 ft Reach
The pole adjusts across a 6 to 12 foot working range, covering suspended workers below leading edges, platforms, and cell tower work zones.
RSQ Assisted Rescue Tool Head
The included tool head seats on the engagement knob of an Ultra-Lok RSQ SRL and shifts the unit from fall arrest mode to descent mode.
Hands-Off Controlled Descent
Once engaged, the RSQ descent mechanism lowers the worker at a controlled rate. The rescuer never bears the load and never leaves a protected position.
One-Rescuer Operation
At 4.7 lb, one trained rescuer can carry, extend, and operate the pole without additional rigging or mechanical advantage systems.
First-Man-Up Series Compatibility
Built on the DBI-SALA First-Man-Up pole platform used to place and retrieve connectors at height, so crews can standardize on one pole system.
No Load Rating Required
The pole positions and activates equipment rather than carrying the worker, so there is no capacity limit to manage during the rescue.
Technical Specifications
| SKU | 3500101 |
|---|---|
| Connected Safety ID Equipped | No |
| For Use With | Ultra-Lok SRL |
| Overall Length | 6 ft |
| Product Series | First-Man-Up; Ultra-Lok |
| Product Type | Pole with RSQ Assisted Rescue Tool (For SRL) |
| Weight | 4.7 lb |
| Warranty | 3M Global Product Warranty against factory defects, one year from first use |
This pole is a rescue and positioning accessory, not a load-bearing device. Never use it to anchor, arrest, or suspend a load. The suspended worker remains supported by the Ultra-Lok RSQ SRL throughout the descent. Keep a documented rescue plan per OSHA 1926.502(d)(20).
Compliance Standards
OSHA 1926.502 and 1910.140
Meets OSHA personal fall protection requirements for construction and general industry.
3M Quality
Designed, tested, and certified by 3M Fall Protection, the successor to Capital Safety and the DBI-SALA legacy.
One-Year Warranty
Covered by the 3M Global Product Warranty against factory defects in workmanship and materials.
Typical Applications
Setup Overview
- Confirm the suspended worker is on an Ultra-Lok RSQ dual-mode SRL and the path below is clear for descent.
- Extend the pole to the reach required and lock the sections.
- Seat the RSQ assisted rescue tool head on the engagement knob of the SRL per the instruction manual.
- Engage the tool to switch the SRL from fall arrest mode to descent mode.
- Monitor the controlled descent until the worker reaches the landing zone, then provide care per your rescue plan.
Full use instructions ship with the unit; the instruction manual is linked in the documentation section below.
Inspection and Retirement
Inspect before each use, and have a competent person inspect the pole and tool head on a documented schedule per the 3M manual.
- Pole sections: extend smoothly, lock positively, and show no cracks, dents, or distortion.
- Tool head: no cracks, corrosion, deformation, or loose hardware at the RSQ interface.
- Locking mechanisms: engage fully and hold under hand pressure.
- Labels: present and legible, with the inspection log current.
Retirement triggers: any failed inspection, impact damage, or wear beyond the limits in the manual. 3M is the sole judge of warranty condition.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
DBI-SALA 3500101 Submittals and Documentation
Instruction Manual 5903011 Rsq Release Tool Self Retracting (PDF)Installation, use, and inspection instructions from 3M. Personal Safety Products Firefighting Notice (PDF)3M notice regarding fluorinated organic compounds. 3500101 Inspection Form (PDF)Printable pass/fail checklist for documented inspections.Compatible and Related Products
- DBI-SALA Sealed-Blok Self Retracting Lifeline Stainless 3400131. Related DBI-SALA product in this line.
Specifying Overhead SRLs for Your Site?
Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
3M DBI-SALA Global Product Warranty
Unless otherwise provided by local laws, 3M fall protection products are warranted against factory defects in workmanship and materials for a period of one year from the date of installation or first use by the original owner.
Limited Remedy: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M's control. 3M will be the sole judge of product condition and warranty options. This warranty applies only to the original purchaser and is the only warranty applicable to 3M's fall protection products.
Limitation of Liability: To the extent permitted by local laws, 3M is not liable for any indirect, incidental, special or consequential damages including, but not limited to loss of profits, in any way related to the products regardless of the legal theory asserted.
The warranty above is made in lieu of all warranties or conditions, express or implied, including the implied warranties or conditions of merchantability or fitness for a particular purpose. Please contact 3M's customer service department in your region for assistance with warranty claims, or reach out to our team at Fall Protection Distributors, LLC and we will help you start the process.
