FallTech 5042AF 5042AF Suspension Trauma Relief System, Arc Flash
FallTech

FallTech 5042AF Suspension Trauma Relief System, Arc Flash

(No reviews yet) Write a Review
$97.50
Brand:
FallTech
SKU:
5042AF
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Harness Accessory

FallTech 5042AF Suspension Trauma Relief System, Arc Flash

The FallTech 5042AF Suspension Trauma Relief System, Arc Flash supports your fall protection program as part of the Harness Accessory line.

Specifications, ratings, and documentation are provided below so you can verify fit with your existing equipment before ordering. It is covered by the FallTech 2-year warranty and ships quickly based on the delivery location.

FallTech 5042AF Suspension Trauma Relief System, Arc Flash
1 SizeAvailable Options
ASTM F887-20Compliance Standard
PolyesterWebbing Material
Non-BeltedBelt Configuration

Who Needs This Product

Deploying relief steps so a suspended worker can stand and restore circulation while awaiting rescue. This product supports that program as a purpose-built component: Suspension Trauma Relief System, Arc Flash.

Features

2-part UniFit system easily

2-part UniFit system easily attaches to most harnesses with choke-on snap fastener installation.

Adjustable length step-in continuous

Adjustable length step-in continuous loop accommodates both user's feet to relieve pressure and improve balance.

Features Nomex cover and

Features Nomex cover and Nomex webbing for full arc flash event protection.

Complies with ASTM F887-20

Complies with ASTM F887-20.

⚠

Safety first. Suspension trauma relief extends safe suspension time; it does not replace a rescue plan. OSHA requires prompt rescue of suspended workers, so plan and rehearse retrieval before work begins.

Compliance Standards

ASTM F887-20

Tested to the ASTM performance requirements for arc flash exposure on fall protection equipment.

OSHA 1926.502 and 1910.140

Satisfies OSHA construction and general industry requirements for personal fall arrest system body support.

Applications

Post-fall suspension reliefDeploying relief steps so a suspended worker can stand and restore circulation while awaiting rescue.
Rescue plan complianceMeeting the OSHA requirement for prompt rescue by extending safe suspension time.
Solo and remote workCrews working where rescue response may take several minutes.
Tower and wind sitesHigh elevations where retrieval takes longer to rig.
General constructionA low-cost addition to every fall arrest harness on site.
Fleet safety programsStandardizing trauma relief on all harnesses in the program.

How to Use

Suspension trauma relief extends the time a fallen worker can safely wait for rescue.

  1. Attach to the harness. Mount the relief system on the harness at the hip or lower webbing per the manual.
  2. Fall occurs. After arrest, the suspended worker deploys the pouch.
  3. Deploy the steps. Release the relief straps and extend the loops to full length.
  4. Stand and pump. Step into the loops and straighten the legs periodically to restore circulation.
  5. Await rescue. Continue weight shifts until the rescue plan retrieves the worker.

Inspection and Service Life

Inspect before each use and on the same formal schedule as the harness it supports. Log formal inspections so the service history follows the equipment.

  • Webbing and fabric: look for cuts, fraying, burns, chemical damage, and UV fading
  • Stitching: check for pulled, broken, or abraded threads at every seam
  • Hardware: confirm no cracks, corrosion, or distortion, and that buckles and closures engage positively
  • Attachment points: verify hook-and-loop, snaps, and routings hold securely
  • Markings: verify identification and size markings remain legible

Remove the item from service if any inspection point fails, and destroy retired equipment so it cannot return to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeSuspension Trauma System
SKU5042AF
NomexCover
StandardsASTM F887-20
WarrantyFallTech 2-year manufacturer warranty, honored through Fall Protection Distributors

Frequently Asked Questions

What is the 5042AF used for?
Deploying relief steps so a suspended worker can stand and restore circulation while awaiting rescue. Meeting the OSHA requirement for prompt rescue by extending safe suspension time.
Is the 5042AF one size?
Yes, it ships in a single configuration; see the specifications table for dimensions and ratings.
What standards apply to the 5042AF?
ASTM F887-20. Documentation is linked in the submittals section.
Does this replace fall arrest equipment?
No. This product supplements a personal fall arrest system and must never be used as the primary fall arrest connection unless the instruction manual explicitly rates it for that use.
How do I install or attach it?
Follow the instruction manual linked in the submittals section; attachment takes only a few minutes and requires no tools.
How often should it be inspected?
Inspect before each use and include it in the same formal inspection program as the harness it supports.
When should it be replaced?
Replace it when webbing or fabric shows cuts, burns, or heavy abrasion, when hardware is damaged, or after any fall arrest event involving the system.

Submittals and Documentation

FallTech 5042AF Spec SheetOne-page technical specifications for this product FallTech 5042AF Instruction ManualFull user instructions, inspection criteria, and donning procedure FallTech 5042AF Declaration of ConformityManufacturer declaration of conformity to the listed standards

Related FallTech Equipment

Pair this product with compatible FallTech connectors, lanyards, and anchors to build a complete fall protection system with matched components.

Order the FallTech 5042AF Today

Every FallTech product we stock ships fast and arrives with full documentation for your safety file. Not sure which size or configuration fits your crew? Our fall protection specialists size harnesses every day.

Call 863-703-4522 for expert help Specifying the right body wear for your application, or order online now for delivery based on the delivery location.

FallTech 2-Year Limited Warranty. FallTech warrants to the buyer that all products are free from defects in material and workmanship at the time of shipment. Obligation is limited to product replacement for two (2) years from the date of installation or use by the owner, not to exceed two (2) years from the date of shipment. This warranty is not transferable and is void if the product is changed, altered, or used in a manner other than intended. It covers defects in material and workmanship only; it does not cover normal wear and tear, neglect, abuse, or accident. The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the FallTech product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!