FallTech 5056 Construction Grade Hi-Vis Orange Vest, 3-Pack
High-visibility orange safety vest uniquely designed for integration with full-body harnesses or detached stand-alone use. Sold as a 3-pack so the whole crew is covered on one line item.
Features secondary reflective striping on day-bright mesh and solid fabrics, internal donning fasteners, and loops for attaching to harness straps.
Who Needs This Product
Crews that wear full-body harnesses over hi-vis apparel fight bunched fabric, hidden D-rings, and vests that shred in weeks. The FallTech 5056 solves that: it attaches to the harness straps with internal fasteners and loops, keeps the dorsal D-ring accessible, and still works as a normal stand-alone vest when no harness is worn.
Features
Harness integration
Internal donning fasteners and loops attach the vest directly to full-body harness straps.
Stand-alone use
Wears as a conventional hi-vis vest when fall protection is not required.
Orange secondary reflective striping
Secondary reflective striping on day-bright mesh and solid fabrics for visibility around vehicular traffic and heavy equipment.
Vest-cut design
Improves the user's access to the belt buckle and pants pockets.
Storage
Vest provides workers with a full zippered front with four front pockets.
Durable construction
Day-bright mesh and solid fabric panels stand up to daily construction wear.
A hi-vis vest is visibility apparel, not fall protection. When working at height, the vest must be worn with a properly fitted full-body harness, and all harness straps must remain fastened and adjusted. Never tie off with any strap unfastened.
Compliance Standards
Visibility Rating
Construction Grade vest with secondary reflective striping on day-bright mesh and solid fabrics per FallTech published product data.
MFBH02 Instructional Supplement
FallTech instructional supplement for full-body harnesses with hi-vis vests, covering donning, attachment, inspection, and washing.
OSHA High-Visibility Guidance
OSHA requires high-visibility apparel for workers exposed to vehicular traffic hazards, including flaggers and roadway construction workers.
Harness Compatibility
Designed to integrate with FallTech full-body harnesses without blocking the dorsal D-ring; see the manual for attachment details.
Typical Applications
How to Use
Follow the FallTech MFBH02 instructional supplement. The sequence below is an overview only.
- Attach the vest to the harness. Secure the internal fasteners and loops to the harness straps, keeping the dorsal D-ring exposed.
- Don the set like a jacket. Check the dorsal D-ring sits between the shoulder blades.
- Fasten every strap. Chest and leg straps must be fastened and snug before any tie-off.
- Zip the vest. Close the front zipper and proceed to the work location.
- Wash by hand. Clean the vest in a light solution of soap and water, then hang it to air dry.
Inspection and Retirement
Inspect the vest and any attached harness before each use per the MFBH02 supplement and the harness manual.
- Fabric: tears, burns, heavy soiling that hides the hi-vis color, and UV fading.
- Striping: reflective tape intact and firmly stitched.
- Zippers and fasteners: functional and complete.
- Attachment loops: no cuts or pulled stitching.
- Harness underneath: full inspection per the harness instruction manual.
Retire the vest when the color fades, the striping peels, or any closure fails; a faded vest no longer provides the intended visibility.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Construction Grade high-visibility safety vest |
|---|---|
| Colorway | Hi-vis orange |
| Sold As | 3-pack (5056SM-3PK, 5056LX-3PK, 50562X3X-3PK) |
| Sizes | Dual-size S/M, L/XL, and 2X/3X |
| Closure | Full front zipper |
| Storage | Full zippered front with four front pockets |
| Harness Integration | Internal donning fasteners and strap loops; dorsal D-ring pass-through |
| Care | Hand wash in a light solution of soap and water; hang to air dry |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
Submittal Documents
Hi-Vis Vest Instruction Manual (MFBH02)FallTech instructional supplement for full-body harnesses with hi-vis vests, covering the 5056.5056 Spec SheetOne-page specification summary for the 5056 vest 3-pack.Related FallTech Gear
Pair the vest with these carried FallTech products.
Talk to a Fall Protection Specialist
Questions about the 5056 vest 3-pack, compatibility, or compliance paperwork? Call 863-703-4522 and we will walk the job with you. Fall Protection Distributors, LLC is an authorized FallTech dealer, and every unit ships new and warrantied.
