FallTech 5076A10 Blank Harness Label Cover, 10/pk
The FallTech 5076A10 Blank Harness Label Cover, 10/pk supports your fall protection program as part of the Harness Accessory line.
Specifications, ratings, and documentation are provided below so you can verify fit with your existing equipment before ordering. It is covered by the FallTech 2-year warranty and ships quickly based on the delivery location.
Who Needs This Product
Adding padding to reduce pressure points during long shifts in a harness. This product supports that program as a purpose-built component: Blank Harness Label Cover, 10/pk.
Features
3-1/2" hook-and-loop closure provides
3-1/2" hook-and-loop closure provides simple and secure installation.
Accepts multiple embellishment applications
Accepts multiple embellishment applications for logos or identification: embroidery, screen print, heat transfer print, and sew-on patch.
Also functions as replacement
Also functions as replacement label cover.
Safety first. Accessories must never alter the fit or function of the harness. Install exactly as the instruction manual directs and include every accessory in your pre-use inspection.
Compliance Standards
OSHA 1926.502 and 1910.140
Satisfies OSHA construction and general industry requirements for personal fall arrest system body support.
Applications
How to Use
Harness accessories install in minutes and become part of the equipment inspection program.
- Inspect first. Check the accessory and the harness it attaches to before each use.
- Position correctly. Install the accessory on the harness exactly as shown in the instruction manual.
- Secure attachment points. Verify hook-and-loop, snaps, or webbing routings are fully engaged.
- Recheck harness fit. Confirm the added component does not interfere with buckles or D-rings.
- Inspect on schedule. Include the accessory in the same inspection program as the harness.
Inspection and Service Life
Inspect before each use and on the same formal schedule as the harness it supports. Log formal inspections so the service history follows the equipment.
- Webbing and fabric: look for cuts, fraying, burns, chemical damage, and UV fading
- Stitching: check for pulled, broken, or abraded threads at every seam
- Hardware: confirm no cracks, corrosion, or distortion, and that buckles and closures engage positively
- Attachment points: verify hook-and-loop, snaps, and routings hold securely
- Markings: verify identification and size markings remain legible
Remove the item from service if any inspection point fails, and destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Label Covers 10/pk |
|---|---|
| SKU | 5076A10 |
| Standards | OSHA 1926.502 |
| Warranty | FallTech 2-year manufacturer warranty, honored through Fall Protection Distributors |
Frequently Asked Questions
Submittals and Documentation
FallTech 5076A10 Spec SheetOne-page technical specifications for this productOrder the FallTech 5076A10 Today
Every FallTech product we stock ships fast and arrives with full documentation for your safety file. Not sure which size or configuration fits your crew? Our fall protection specialists size harnesses every day.
Call 863-703-4522 for expert help Specifying the right body wear for your application, or order online now for delivery based on the delivery location.
