FallTech CMB0756LTL Combo, 7007 Harness and 8256LTL Lanyard shown with all included components on white background
FallTech

FallTech CMB0756LTL Combo, 7007 Harness and 8256LTL Lanyard

(No reviews yet) Write a Review
$104.00
Brand:
FallTech
SKU:
CMB0756LTL
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Safety Kits

FallTech CMB0756LTL Combo, 7007 Harness and 8256LTL Lanyard

1D FT Basic full-body harness for fall arrest with mating buckle legs and a mating buckle chest. UniFit sizing covers the majority of workers.

Paired with the FallTech 8256LTL, a 6 ft single-leg FT Basic SoftPack energy absorbing lanyard with a choke-loop for harness attachment and a plated alloy steel snap hook for the anchorage. Shipped as a matched two-piece set, ready to issue.

FallTech CMB0756LTL combo with 7007 harness and 8256LTL energy absorbing lanyard
7007FT Basic Harness
8256LTLSoftPack Loop EAL
ANSI Z359.11Harness Standard
ANSI Z359.13Lanyard Standard
310 lbANSI Capacity
425 lbOSHA Capacity
2-PieceMatched Set
11.2 lbSet Weight

Who Needs This Product

Contractors, facility managers, and safety directors buy harness and lanyard combos when a new hire, subcontractor, or visitor needs compliant fall protection today. This set pairs the FallTech 7007 FT Basic harness with the 8256LTL energy absorbing lanyard. One SKU on the PO, one package on the shelf, one worker equipped.

Features

7007 FT Basic harness

1D (dorsal) full-body harness rated for fall arrest with a 5,000 lb minimum static strength dorsal D-ring.

Simple buckle adjustment

The harness provides workers with mating buckle legs and a mating buckle chest for a fast, secure fit.

8256LTL energy absorbing lanyard

A 6 ft single-leg FT Basic SoftPack energy absorbing lanyard that limits average arrest force to 900 lb.

Connector hardware

The lanyard includes a choke-loop for harness attachment and a plated alloy steel snap hook for the anchorage.

Matched components

Combination includes: 7007 harness and 8256LTL lanyard.

Ready to issue

Sized, matched, and boxed as one line item so crews are equipped without piecing parts together.

⚠

A kit equips a worker, an anchor completes the system. The harness and lanyard still need a rated anchor point, and a 6 ft energy absorbing lanyard needs roughly 18.5 ft of fall clearance below the anchor. Run the calculator below before the first tie-off.

Compliance Standards

ANSI Z359.11-2014

Full-body harness standard covering the 7007. See the harness Declaration of Conformity in the submittals section.

ANSI Z359.13-2013

Energy absorbing lanyard standard covering the 8256LTL on FallTech DoC #C0116032a.

OSHA 1926.502

Construction fall protection criteria for personal fall arrest systems, including anchorage, free fall, and clearance requirements.

OSHA 1910.140

General industry personal fall protection systems rule for walking-working surfaces.

Typical Applications

New hiresStandard-issue fall protection on day one.
SubcontractorsCompliant loaner gear for visiting trades.
Tool cribsStocked sets checked out per job.
General constructionEveryday fall arrest at 6 ft plus heights.
Fleet standardSame set in every truck across the fleet.

How to Use

Follow the FallTech instruction manuals. The sequence below is an overview only.

  1. Fit the harness. Don the harness, adjust the leg and chest buckles, and check the dorsal D-ring sits between the shoulder blades.
  2. Connect the lanyard. Attach the lanyard choke-loop to the dorsal D-ring web loop per the manual; the hook end connects to a rated anchor.
  3. Verify clearance. A 6 ft energy absorbing lanyard needs roughly 18.5 ft of clearance below the anchor; run the calculator on this page.
  4. Inspect before each use. Webbing, stitching, hardware, and the energy absorber pack.
  5. Keep the set together. Issue the harness and lanyard as one unit so inspection records stay matched.

Inspection and Retirement

Inspect the harness and lanyard before each use, with a documented competent person inspection at least annually.

  • Webbing: cuts, burns, fraying, UV chalking, and chemical damage.
  • Stitching: broken or pulled threads at load-bearing seams.
  • Hardware: buckles, D-rings, and hooks free of cracks, corrosion, and gate defects.
  • Energy absorber: pack cover intact with no deployment evidence.
  • Labels: legible with serial and date recorded in the inspection log.

Retirement triggers: any fall arrest event, a deployed absorber, damaged webbing or hardware, or a failed inspection.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeFT Basic harness with soft pack energy absorbing lanyard
SKUCMB0756LTL
Harness7007: 1D (dorsal), mating buckle legs, mating buckle chest, UniFit sizing
Lanyard8256LTL: 6 ft single-leg FT Basic SoftPack energy absorbing lanyard with a choke-loop for harness attachment and a plated alloy steel snap hook for the anchorage
User Capacity130 to 310 lb (ANSI); 130 to 425 lb (OSHA)
Average Arrest Force900 lb maximum average (lanyard)
StandardsANSI Z359.11-2014 (harness); ANSI Z359.13-2013 (lanyard); OSHA 1926.502 and 1910.140
Unit Weight11.2 lb (set)
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

What exactly is in the combo?
A FallTech 7007 FT Basic full-body harness and the 8256LTL, a 6 ft single-leg FT Basic SoftPack energy absorbing lanyard with a choke-loop for harness attachment and a plated alloy steel snap hook for the anchorage. Nothing else is required except a rated anchor point.
What sizes does the harness cover?
The 7007 is a UniFit harness that covers the majority of workers (roughly S through L body sizes) with adjustable leg, chest, and torso strapping. Weight capacity is 310 lb under ANSI and up to 425 lb under OSHA per the manual.
What standards do the components meet?
The harness is certified to ANSI Z359.11-2014 per the FallTech 7007 spec sheet, with CSA Z259.10-2018 coverage on DoC #BC1019002, and the 8256LTL energy absorbing lanyard is certified to ANSI Z359.13-2013 on FallTech DoC #C0116032a. Both meet OSHA 1926.502 requirements, and each document is linked in the submittals section.
How much fall clearance does a 6 ft lanyard need?
Roughly 18.5 ft from the anchor to the nearest obstruction: 6 ft of lanyard, up to 4 ft of deceleration, plus body length and a safety factor. If you do not have that clearance, use an SRL instead; the calculator on this page runs your numbers.
Can I anchor the lanyard at my feet?
No. A standard 6 ft energy absorbing lanyard is designed for anchorage at dorsal D-ring height or above. Foot-level tie-off requires a leading-edge rated device.
Who is Fall Protection Distributors?
Fall Protection Distributors, LLC is an authorized FallTech dealer. Every product ships new, boxed, and warrantied.
How quickly does this combo ship?
Usually ships in 1 business day from our warehouse. Delivery time is based on the delivery location.

Submittal Documents

7007 Harness Instruction ManualFallTech full-body harness user instruction manual covering the 7007.7007 Harness Declaration of Conformity (CSA)FallTech DoC #BC1019002 listing the 7007 harness.8256LTL Lanyard Instruction ManualFallTech shock absorbing lanyard instruction manual covering the 8256LTL.8256LTL Lanyard Declaration of ConformityFallTech DoC #C0116032a listing the 8256LTL lanyard, ANSI Z359.13-2013.CMB0756LTL Spec SheetOne-page specification summary for the CMB0756LTL combo.

Related FallTech Gear

Build out the rest of the system with these carried FallTech products.

Talk to a Fall Protection Specialist

Questions about the CMB0756LTL combo, compatibility, or compliance paperwork? Call 863-703-4522 and we will walk the job with you. Fall Protection Distributors, LLC is an authorized FallTech dealer, and every unit ships new and warrantied.

FallTech 2-Year Limited Warranty. FallTech warrants to the buyer that all products are free from defects in material and workmanship at the time of shipment. Obligation is limited to product replacement for two (2) years from the date of installation or use by the owner, not to exceed two (2) years from the date of shipment. This warranty is not transferable and is void if the product is changed, altered, or used in a manner other than intended. It covers defects in material and workmanship only; it does not cover normal wear and tear, neglect, abuse, or accident. The limited warranty is provided only to an end-user customer for the period set forth in an order that has been accepted by Fall Protection Distributors, LLC. The end user customer must be: (a) a Buyer purchasing product directly from Fall Protection Distributors, LLC or Buyer of product purchasing from an authorized reseller. The limited warranty covers defects in materials and workmanship in the FallTech product. The limited warranty does not cover problems resulting from external causes such as accident, abuse, misuse, servicing not authorized by Fall Protection Distributors, LLC, usage that is not in accordance with product instructions, failure to follow the product instructions or failure to perform preventive maintenance, problems caused by using accessories, parts, or components not supplied by Fall Protection Distributors, LLC; normal wear and tear; and products with missing or altered service tags or serial numbers. FALL PROTECTION DISTRIBUTORS, LLC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN PRODUCT IS LIMITED TO REPAIR AND REPLACEMENT OF THE PRODUCT AS SET FORTH IN THIS WARRANTY STATEMENT. EXCEPT AS PROVIDED ABOVE, FALL PROTECTION DISTRIBUTORS, LLC AND ITS SUPPLIERS MAKE NO, AND HEREBY DISCLAIM ALL OTHER, WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!