FallTech KIT0759Y6P User Kit, 7007 Harness and 8259Y Lanyard
1D FT Basic full-body harness for fall arrest with mating buckle legs and a mating buckle chest. UniFit sizing covers the majority of workers.
Paired with the FallTech 8259Y, a 6 ft double-leg (Y-leg) internal energy absorbing lanyard with plated alloy steel snap hooks on the harness end and both anchorage legs. Packed in the FallTech 16 in medium storage bag (9 in wide x 8 in deep x 16 in long).
Who Needs This Product
Contractors, facility managers, and safety directors buy user kits when a new hire, subcontractor, or visitor needs compliant fall protection today. This set pairs the FallTech 7007 FT Basic harness with the 8259Y energy absorbing lanyard, packed in the 16 in medium storage bag that keeps the gear together in the truck. One SKU on the PO, one package on the shelf, one worker equipped.
Features
7007 FT Basic harness
1D (dorsal) full-body harness rated for fall arrest with a 5,000 lb minimum static strength dorsal D-ring.
Simple buckle adjustment
The harness provides workers with mating buckle legs and a mating buckle chest for a fast, secure fit.
8259Y energy absorbing lanyard
A 6 ft double-leg (Y-leg) internal energy absorbing lanyard that limits average arrest force to 900 lb.
Connector hardware
The lanyard includes plated alloy steel snap hooks on the harness end and both anchorage legs.
Matched components
Kit contains: 7007 harness and 8259Y lanyard, plus the 16 in medium storage bag.
Included storage bag
The 16 in medium storage bag measures 9 in wide x 8 in deep x 16 in long and features a center zipper, paired handles, and a shoulder strap.
A kit equips a worker, an anchor completes the system. The harness and lanyard still need a rated anchor point, and a 6 ft energy absorbing lanyard needs roughly 18.5 ft of fall clearance below the anchor. Run the calculator below before the first tie-off.
Compliance Standards
ANSI Z359.11-2014
Full-body harness standard covering the 7007. See the harness Declaration of Conformity in the submittals section.
ANSI Z359.13-2013
Energy absorbing lanyard standard covering the 8259Y on FallTech DoC #C0116023.
OSHA 1926.502
Construction fall protection criteria for personal fall arrest systems, including anchorage, free fall, and clearance requirements.
OSHA 1910.140
General industry personal fall protection systems rule for walking-working surfaces.
Typical Applications
How to Use
Follow the FallTech instruction manuals. The sequence below is an overview only.
- Fit the harness. Don the harness, adjust the leg and chest buckles, and check the dorsal D-ring sits between the shoulder blades.
- Connect the lanyard. Attach the lanyard snap hook to the dorsal D-ring; the free end connects to a rated anchor.
- Verify clearance. A 6 ft energy absorbing lanyard needs roughly 18.5 ft of clearance below the anchor; run the calculator on this page.
- Inspect before each use. Webbing, stitching, hardware, and the energy absorber pack.
- Store it in the bag. The included bag keeps the set complete and clean between jobs.
Inspection and Retirement
Inspect the harness and lanyard before each use, with a documented competent person inspection at least annually.
- Webbing: cuts, burns, fraying, UV chalking, and chemical damage.
- Stitching: broken or pulled threads at load-bearing seams.
- Hardware: buckles, D-rings, and hooks free of cracks, corrosion, and gate defects.
- Energy absorber: pack cover intact with no deployment evidence.
- Labels: legible with serial and date recorded in the inspection log.
Retirement triggers: any fall arrest event, a deployed absorber, damaged webbing or hardware, or a failed inspection.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | FT Basic harness with internal energy absorbing lanyard |
|---|---|
| SKU | KIT0759Y6P |
| Harness | 7007: 1D (dorsal), mating buckle legs, mating buckle chest, UniFit sizing |
| Lanyard | 8259Y: 6 ft double-leg (Y-leg) internal energy absorbing lanyard with plated alloy steel snap hooks on the harness end and both anchorage legs |
| Storage Bag | 5006MP: 16 in medium storage bag, 9 in wide x 8 in deep x 16 in long, a center zipper, paired handles, and a shoulder strap |
| User Capacity | 130 to 310 lb (ANSI); 130 to 425 lb (OSHA) |
| Average Arrest Force | 900 lb maximum average (lanyard) |
| Standards | ANSI Z359.11-2014 (harness); ANSI Z359.13-2013 (lanyard); OSHA 1926.502 and 1910.140 |
| Unit Weight | 14.9 lb (set) |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
Submittal Documents
7007 Harness Instruction ManualFallTech full-body harness user instruction manual covering the 7007.7007 Harness Declaration of Conformity (CSA)FallTech DoC #BC1019002 listing the 7007 harness.8259Y Lanyard Instruction ManualFallTech shock absorbing lanyard instruction manual covering the 8259Y.8259Y Lanyard Declaration of ConformityFallTech DoC #C0116023 listing the 8259Y lanyard, ANSI Z359.13-2013.KIT0759Y6P Spec SheetOne-page specification summary for the KIT0759Y6P kit.Related FallTech Gear
Build out the rest of the system with these carried FallTech products.
Talk to a Fall Protection Specialist
Questions about the KIT0759Y6P user kit, compatibility, or compliance paperwork? Call 863-703-4522 and we will walk the job with you. Fall Protection Distributors, LLC is an authorized FallTech dealer, and every unit ships new and warrantied.
