FallTech 7094 Heavy-duty Tool Belt for Harnesses, Aluminum Buckle
The FallTech 7094 is a heavy-duty Tool Belt for Harnesses with Aluminum Buckle from the Tool Belt family, built with 1-3/4" heavyweight polyester webbing rated to 5,000 lb minimum static strength and an aluminum alloy buckle with 7 grommeted adjustment positions.
It meets OSHA 1926.502 and 1910.140 and is available in 8 size options. This is a tool belt, not a fall arrest attachment point: your lanyard or SRL connects to the harness, never to the belt. Every unit ships with the full FallTech documentation package, linked below for your safety submittals.
Who Needs This Product
Crews who need a heavy-duty replacement tool belt for belted FallTech harnesses. The FallTech spec sheet lists this belt as ideally suited for replacement on ComforTech® Gel, FlowTech LTE®, and Journeyman Flex aluminum harnesses, and the 1-3/4" heavyweight webbing supports multiple tool bags and pouches.
Features
Heavyweight webbing and grommets
1-3/4" heavyweight webbing with aluminum alloy buckle and 2-part plated brass grommets supports multiple tool bag use.
Harness replacement fit
Ideally suited for replacement on ComforTech® Gel, FlowTech LTE®, and Journeyman Flex aluminum harnesses.
7 adjustment positions
Features 7 adjustment positions providing a 9" range of fit.
OSHA compliant
Meets OSHA 1926.502 and 1910.66 Regulations.
Safety first. A tool belt carries tools and tool bags; it is not fall arrest body wear. Don the harness according to the harness manufacturer's instructions, keep the belt comfortably snug, and never use this Type E tool belt as a restraint or positioning belt, per the FallTech Body Belts manual.
Compliance Standards
OSHA 1926.502 and 1910.140
The FallTech spec sheet lists OSHA 1926.502 and 1910.140 for this tool belt. The belt supports tools and tool bags and is not a fall arrest connection point.
Applications
How to Use
This Type E tool belt integrates into a belted harness. The FallTech Body Belts manual, section 4.4, describes the attachment procedure.
- Inspect first. Check webbing, stitching, grommets, and the buckle for damage before every use. Remove the belt from service if you find cuts, tears, burns, or corrosion.
- Free the belt. Pull the belt out of the harness far enough to pass the end through the loop of the first tool pouch.
- Thread the belt. Reinsert the belt through the padding channel and the harness slot, around the back, through the next tool pouch loop, and back into the padding channel and harness slot.
- Fasten the buckle. Seat the buckle tongue in a grommeted hole and confirm the buckle is properly secured. The belt should be comfortably snug.
- Use it for tools only. Carry tools and tool bags on the belt, and connect fall protection only to the harness. Do not use the Type E belt as a restraint or positioning belt.
Inspection and Service Life
The FallTech Body Belts manual requires the worker to inspect the belt before each use, and an inspection by a competent person every six months. Record results on the inspection record in Appendix B of the manual.
- Webbing: look for cuts, tears, fraying, abrasion, discoloration, burns, holes, and chemical damage
- Stitching: check for pulled, broken, or abraded threads at load-bearing junctions
- Buckle and grommets: confirm no corrosion, distortion, or excess wear on metal parts, and that the buckle tongue seats positively
- Labels: verify the labels are present and legible
Remove the belt from service if any inspection point fails, and destroy retired equipment so it cannot return to service.
Product Video
See the Frontline davit arm system set up for confined-space entry and non-entry rescue retrieval.
Who Needs This Product
This product is a confined space davit system - the rotating retrieval point that lowers and recovers workers and material over an opening. Confined space teams, utilities, and tank crews build their entry and non-entry rescue around it. It requires a rated winch or 3-way SRL, a full body harness, and a written rescue plan to form a complete system.
Features
360-degree boom
Swing the load over the opening and away to the landing zone.
Two integrated pulleys
Run a fall arrest SRL and a retrieval winch line simultaneously.
Permanent base options
Mount to steel, concrete, or a truck bed for mobile rescue.
Made in the USA
Patriot-line build for Buy American specs.
Removable boom
Lift the boom out when the entry point is not in use.
Tank and edge ready
Reaches over tank rims and leading edges.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Aluminum Buckle |
|---|---|
| SKU | 7094 |
| Family | Tool Belt |
| Adjustment | 7 grommeted positions, 9" range of fit |
| Buckle | Aluminum alloy |
| Webbing | Polyester |
| ANSI User Capacity | 130 to 310 lb max. |
| OSHA User Capacity | 130 to 425 lb max. |
| Standards | OSHA 1926.502 and 1910.140 |
| Available Configurations | 70942X (2X (50" to 59")), 70943X (3X (54" to 63")), 70944X (4X (58" to 67")), 7094L (Large (42" to 51")), 7094M (Medium (38" to 47")), 7094S (Small (34" to 43")), 7094XL (XL (46" to 55")), 7094XS (XS (30" to 39")) |
| Warranty | FallTech 2-year manufacturer warranty, honored through Fall Protection Distributors |
Frequently Asked Questions
Submittals and Documentation
FallTech 7094 Spec SheetOne-page technical specifications for this product FallTech 7094 Instruction ManualFull user instructions, inspection criteria, and donning procedureRelated FallTech Equipment
Pair this product with compatible FallTech connectors, lanyards, and anchors to build a complete fall protection system with matched components.
Order the FallTech 7094 Today
Every FallTech product we stock ships fast and arrives with full documentation for your safety file. Not sure which size or configuration fits your crew? Our fall protection specialists match body wear and accessories every day.
Call 863-703-4522 for expert help Specifying the right body wear for your application, or order online now for delivery based on the delivery location.
