FallTech 72706SG6 and C72706SG6 DuraTech Mini 6 ft Web Personal SRL, Class 1 (ANSI or CSA)
The FallTech 72706SG6 is a 6 ft web single-leg personal self-retracting lifeline (SRL-P). The Dyneema web lifeline retracts as you move and locks in a fall, with an external energy absorber and internal locking pawls for smooth, positive lockup. This configuration uses a lightweight aluminum dorsal carabiner and an aluminum captive-eye carabiner.
Choose your certification at checkout: ANSI Z359.14 for US jobsites or CSA Z259.2.2-2017 for Canada. Rated for a single user of 130 to 310 lb combined weight. Overhead-anchorage Class 1 device; not rated for leading-edge use.
Who Needs This Product
This product is a personal self-retracting lifeline (SRL-P), a fall-arrest connecting device that pays out and retracts automatically and locks in inches if a fall starts. This 72706SG6 configuration is built with a lightweight aluminum dorsal carabiner and an aluminum captive-eye carabiner for crews who need that specific connector setup. You still need a certified full-body harness and a rated overhead anchorage to complete the system.
Features
Hands-free retracting lifeline
The Dyneema web lifeline retracts as you move, with less fall distance than a lanyard.
Class 1 performance
Certified Class 1 to ANSI Z359.14 for overhead-anchored fall arrest.
Alum Carab + Carabiner configuration
Built with a lightweight aluminum dorsal carabiner and an aluminum captive-eye carabiner.
External energy absorber
An external energy absorber with internal locking pawls delivers smooth deceleration.
Impact-resistant housing
Glass-reinforced housing stands up to daily jobsite use.
ANSI and CSA certified
Select ANSI Z359.14 or CSA Z259.2.2-2017 to match your jobsite.
Overhead anchorage only, not for leading edges. This is an overhead-anchorage Class 1 personal SRL. It is not rated for foot-level or sharp-edge (leading-edge) applications. Anchor overhead and run the Fall Protection Calculator below to confirm clearance.
Compliance Standards
ANSI Z359.14
American National Standard for self-retracting devices, Class 1 (model 72706SG6).
CSA Z259.2.2-2017
Canadian standard for self-retracting devices (model C72706SG6).
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
OSHA 29 CFR 1910.140
General industry personal fall protection requirements.
Typical Applications
How to Use the DuraTech Mini SRL
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the lifeline, braking (sharp-pull lock test), housing, energy absorber, and all connectors before each use.
- Anchor. Connect the anchorage end to a rated overhead anchor.
- Connect to the harness. Attach the connector to the dorsal D-ring of a certified full-body harness.
- Confirm the connections. Verify every gate is fully closed and locked.
- Verify clearance. Confirm fall clearance and swing-fall below the work surface, and run the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least every 6 months. Pull the SRL from service for any of the conditions below.
- Lifeline: cuts, fraying, abrasion, corrosion, kinks, burns, or chemical damage.
- Braking: the lifeline must lock sharply on a quick pull test.
- Housing: cracks, loose fasteners, or a damaged lifeline exit.
- Energy absorber / load indicator: any sign of deployment or activation.
- Connectors and swivels: deformation, corrosion, or gates that fail to lock.
Retire the SRL immediately after any fall-arrest event, or if any inspection point fails. Destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 72706SG6 (ANSI) or C72706SG6 (CSA) |
|---|---|
| Type | 6 ft web personal SRL (SRL-P) |
| Class | Class 1 personal SRL (SRL-P), overhead anchorage |
| Lifeline | Dyneema web, 6 ft |
| Harness connector | Aluminum dorsal carabiner |
| Anchorage connector | Aluminum captive-eye carabiner |
| Capacity | 130 to 310 lb combined weight |
| Leading edge | No. Overhead anchorage only. |
| Standards | ANSI Z359.14; CSA Z259.2.2-2017; OSHA 1926.502 and 1910.140 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 72706SG6 DuraTech Mini SRL Submittals and Documentation
72706SG6 ANSI Instruction Manual (PDF)Use, class, capacity, and inspection. 72706SG6 CSA Instruction Manual (PDF)Bilingual EN/FR use and inspection. 72706SG6 ANSI Declaration of Conformity (PDF)Certification to ANSI Z359.14. 72706SG6 CSA Declaration of Conformity (PDF)Certification to CSA Z259.2.2-2017. 72706SG6 Spec Sheet (PDF)One-page specifications and compliance summary. 72706SG6 Canada Catalogue Supplement (PDF)FallTech Canadian product line reference.Related CSA Certified Products
- CSA and Canada Certified fall protection. Browse the full CSA-certified selection.
- FallTech fall protection equipment. See the complete FallTech line.
Specifying SRLs for Your Crew?
The right gear has to match the work height, the standard you work to, and the fall clearance below. Confirm your application and anchorage with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
