FallTech 8242Y3 and C8242Y3 6 ft WeldTech Y-Leg 100% Tie-Off Energy-Absorbing Lanyard, Rebar Hooks
The FallTech WeldTech 8242Y3 is a 6 ft twin-leg 100% tie-off energy-absorbing lanyard for welding and hot-work. Two anchorage legs keep you continuously connected while moving, and Kevlar leg webbing with a Nomex-covered Softpack absorber resist slag, spatter, and burns. In a fall, the Softpack absorber deploys to keep arrest forces within safe limits. Choose your certification at checkout: the 8242Y3 is certified to ANSI Z359.13-2013 for US jobsites, and the C8242Y3 to CSA Z259.11-17 for Canada.
A single alloy steel snap hook connects to the harness dorsal D-ring, and each leg terminates in a steel rebar hook for large-opening anchorages. Rated for a worker up to 350 lb combined weight, with a 6 ft maximum free fall. Certified to ANSI Z359.13-2013 (model 8242Y3) or CSA Z259.11-17 (model C8242Y3), aligning with OSHA 1926.502 and 1910.66.
Who Needs This Product
This product is a welding-grade twin-leg (Y-leg) energy-absorbing lanyard for 100% tie-off in hot-work. Ironworkers and welders use it to stay continuously connected while moving on the steel where sparks would burn a standard lanyard. Pick the ANSI version (8242Y3) for the US or the CSA version (C8242Y3) for Canada. You still need a certified full-body harness and rated anchorages to complete the personal fall-arrest system.
Features
Softpack energy absorber
A compact Softpack energy absorber with a Nomex cover deploys in a fall to keep arrest forces within limits.
Nomex and Kevlar construction
Kevlar leg webbing and a Nomex absorber cover resist slag, spatter, and burns in hot-work welding.
Spatter and burn resistant
Built for welding and hot-work where standard polyester webbing would be damaged.
Steel rebar hooks
A transverse-load-rated steel rebar hook terminates each leg for large-opening anchorages.
Alloy steel connectors
Self-closing, self-locking alloy steel hooks with 3,600 lb gate strength.
Dual certified ANSI and CSA
Available ANSI Z359.13-2013 or CSA Z259.11-17, one lanyard for both sides of the border.
Confirm your fall clearance before every use. This lanyard allows up to 6 ft of free fall and the absorber can deploy up to 4.5 ft, so the minimum required fall clearance is about 18 ft below the work surface in an overhead configuration. Anchor overhead where possible, connect only to a certified full-body harness dorsal D-ring, and run the Fall Protection Calculator below before you rig.
Compliance Standards
ANSI Z359.13-2013
American National Standard for personal energy absorbers and lanyards (model 8242Y3).
CSA Z259.11-17
Canadian standard for personal energy absorbers and lanyards (model C8242Y3). Certified by the IAS-accredited FallTech test lab, TL-594.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
OSHA 29 CFR 1910.66
General industry personal fall protection requirements.
Typical Applications
How to Use the 8242Y3
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the webbing, stitching, energy absorber, and all connectors before each use.
- Anchor. Connect both leg rebar hooks to rated anchors for 100% tie-off, or one leg while transferring.
- Connect to the harness. Attach the harness connector to the dorsal D-ring of a certified full-body harness.
- Confirm the connections. Verify every hook gate is fully closed and locked.
- Verify clearance. Confirm fall clearance and swing-fall below the work surface, and run the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at intervals set by your site conditions and at least annually. Pull the lanyard from service for any of the conditions below.
- Webbing: cuts, fraying, abrasion, burns, or chemical damage.
- Energy absorber: any sign of deployment, or a torn or damaged cover.
- Stitching: pulled, cut, or broken threads.
- Hooks: deformation, corrosion, or gates that fail to close and lock.
- Labels: illegible or missing markings.
Retire the lanyard immediately after any fall-arrest event, or if any inspection point fails. Destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 8242Y3 (ANSI Z359.13) or C8242Y3 (CSA Z259.11) |
|---|---|
| Manufacturer Part Number | 8242Y3 (ANSI) / C8242Y3 (CSA) |
| Type | Double-leg (100% tie-off) welding energy-absorbing lanyard, 6 ft, rebar hooks |
| Webbing | 1 in Kevlar leg webbing with Nomex absorber cover, 5,000 lb minimum static strength |
| Energy absorber | Softpack energy absorber with Nomex cover; Kevlar leg webbing for spatter and burn resistance |
| Harness end | Alloy steel snap hook (harness) |
| Anchorage end | Two legs, each with a transverse-load-rated steel rebar hook |
| Connector strength | 5,000 lb minimum static, 3,600 lb gate strength |
| Capacity | 350 lb maximum combined weight of user, tools, and clothing |
| Maximum free fall | 6 ft (1.8 m) |
| Maximum absorber deployment | 4.5 ft (1.4 m) |
| Minimum required fall clearance | 18 ft (5.5 m) overhead configuration, worst case |
| Certification options | 8242Y3 = ANSI Z359.13-2013 (US); C8242Y3 = CSA Z259.11-17 (Canada). Select at checkout. |
| Standards | ANSI Z359.13-2013; CSA Z259.11-17; OSHA 1926.502 and 1910.66 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
| UPC | 848013088987 (8242Y3) / 848013067159 (C8242Y3) |
Frequently Asked Questions
FallTech 8242Y3 and C8242Y3 Submittals and Documentation
8242Y3 ANSI Instruction Manual (PDF)Use, limitations, capacity, fall clearance, and inspection. 8242Y3 CSA Instruction Manual (PDF)Bilingual EN/FR use, limitations, and inspection. 8242Y3 ANSI Declaration of Conformity (PDF)Certification to ANSI Z359.13-2013 from the FallTech test lab. 8242Y3 CSA Declaration of Conformity (PDF)Certification to CSA Z259.11-17 with the IAS-accredited FallTech lab. 8242Y3 Spec Sheet (PDF)One-page specifications and compliance summary. 8242Y3 Canada Catalogue Supplement (PDF)FallTech Canadian product line reference.Related CSA Certified Products
- CSA and Canada Certified fall protection. Browse the full CSA-certified selection.
- FallTech fall protection equipment. See the complete FallTech line.
Specifying Lanyards for Your Crew?
Lanyards, harnesses, and anchors have to match the work height, the standard you work to, and the fall clearance below. Confirm your application and anchorage with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
