FallTech 82710 10 ft DuraTech Web Personal SRL (ANSI or CSA), Steel Snap or Rebar Hook
The FallTech 82710 is a 10 ft DuraTech web personal self-retracting lifeline for overhead fall arrest with extra working range. The abrasion-resistant Dyneema web lifeline retracts as you move and locks in a fall, with internal inertial brakes and a glass-reinforced housing for jobsite durability.
Choose your certification and hook at checkout: ANSI Z359.14 for US jobsites or CSA Z259.2.2-2017 for Canada, with a steel snap hook (standard) or a transverse-load-rated steel rebar hook and a steel dorsal connecting carabiner. Rated for a single user of 130 to 310 lb. Conforms to ANSI Z359.14 as a Class B device.
Who Needs This Product
This product is a personal self-retracting lifeline (SRL-P), a fall-arrest connecting device that pays out and retracts automatically and locks in inches if a fall starts. The 10 ft web lifeline gives more working range than a 6 ft mini for overhead-anchored fall arrest. You still need a certified full-body harness and a rated anchorage to complete the system.
Features
Hands-free 10 ft web lifeline
The abrasion-resistant Dyneema web retracts as you move, with 10 ft of working range.
Class B SRL
Conforms to ANSI Z359.14 as a Class B device for overhead fall arrest.
Snap or rebar hook
Order with a steel snap hook (standard) or a transverse-load-rated steel rebar hook.
Steel dorsal carabiner
Includes a steel connecting carabiner for the harness dorsal D-ring.
Glass-reinforced housing
Impact-resistant housing with internal inertial brakes for reliable lockup.
ANSI and CSA certified
Select ANSI Z359.14 or CSA Z259.2.2-2017 to match your jobsite.
Overhead anchorage, not for leading edges. This is a web personal SRL for overhead-anchored fall arrest. It is not rated for foot-level or sharp-edge (leading-edge) use where the lifeline could contact an edge in a fall. Anchor overhead, and run the Fall Protection Calculator below to confirm clearance.
Compliance Standards
ANSI Z359.14
American National Standard for self-retracting devices; Class B (models 82710SC1/SC3).
CSA Z259.2.2-2017
Canadian standard for self-retracting devices (models C82710SC1/SC3).
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
OSHA 29 CFR 1910.140
General industry personal fall protection requirements.
Typical Applications
How to Use the DuraTech 10' Web SRL
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the lifeline, braking (sharp-pull lock test), housing, energy absorber, and all connectors before each use.
- Anchor. Connect the anchorage carabiner to a rated overhead anchor.
- Connect to the harness. Attach the connector to the dorsal D-ring of a certified full-body harness.
- Confirm the connections. Verify every gate is fully closed and locked.
- Verify clearance. Confirm fall clearance and swing-fall below the work surface, and run the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least every 6 months. Pull the SRL from service for any of the conditions below.
- Lifeline: cuts, fraying, abrasion, corrosion, kinks, burns, or chemical damage.
- Braking: the lifeline must lock sharply on a quick pull test.
- Housing: cracks, loose fasteners, or a damaged lifeline exit.
- Energy absorber / load indicator: any sign of deployment or activation.
- Connectors and swivels: deformation, corrosion, or gates that fail to lock.
Retire the SRL immediately after any fall-arrest event, or if any inspection point fails. Destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Base SKU | 82710 (select certification and hook type at checkout) |
|---|---|
| Type | 10 ft web personal SRL (SRL-P) |
| Class | Class B (ANSI Z359.14) |
| Lifeline | Dyneema web, 10 ft |
| Harness connector | Steel dorsal connecting carabiner |
| Anchorage connector | Steel snap hook (standard) or transverse-load-rated steel rebar hook |
| Capacity | 130 to 310 lb combined weight |
| Housing | Glass-reinforced, internal inertial brakes |
| Leading edge | No. Overhead anchorage only. |
| Standards | ANSI Z359.14; CSA Z259.2.2-2017; OSHA 1926.502 and 1910.140 |
| Configurations | Snap: 82710SC1 / C82710SC1. Rebar: 82710SC3 / C82710SC3. |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 82710 DuraTech 10' Web SRL Submittals and Documentation
82710 ANSI Instruction Manual (PDF)Use, class, capacity, and inspection (ANSI Z359.14). 82710 CSA Instruction Manual (PDF)Bilingual EN/FR use and inspection (CSA Z259.2.2). 82710 ANSI Declaration of Conformity (PDF)Certification to ANSI Z359.14. 82710 CSA Declaration of Conformity (PDF)Certification to CSA Z259.2.2-2017. 82710 Spec Sheet (PDF)One-page specifications and compliance summary. 82710 Canada Catalogue Supplement (PDF)FallTech Canadian product line reference.Related CSA Certified Products
- CSA and Canada Certified fall protection. Browse the full CSA-certified selection.
- FallTech fall protection equipment. See the complete FallTech line.
Specifying SRLs for Your Crew?
SRLs, harnesses, and anchors have to match the work height and the edge. Confirm your application, anchorage, and clearance with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
