Roof Jack Pro Pack: Walk-Boards For Standing Seam Roofs
The Roof Jack Pro Pack is an all-in-one kit designed for roofing contractors and solar installers. It provides a secure and non-penetrating walk-board mounting solution for most standing seam roofs. This comprehensive package includes 8 Standing Seam Roof Anchor (SSRA1) seam anchors and 4 SSRA2 Adjustable Roof Jack adapters, allowing workers to mount 20' of walk-boards with zero panel penetrations.
Check out this quick unboxing of the Roof Jack Pro Pack to see how we package the 8 anchors, 4 adapters, and precision torque tools for your walk-board setup.
Non-Penetrating Anchors: The SSRA1 Seam Anchors
The SSRA1 anchors provide a revolutionary non-penetrating design, ensuring the integrity of standing seam roofs. Made from solid 6061-T6 aluminum, each anchor features 12 stainless steel set screws (for 22-gauge steel panels) and 12 nylon-tipped stainless steel set screws (for 22-gauge or 24-gauge steel panels). Engineered to revolutionize fall protection anchorage attachment, the SSRA1 is unlike anything currently available, offering a patented design that maintains roof integrity while providing superior safety.
SSRA1 system with separately available accessories.
Unmatched Strength and Durability: Tested Beyond Standards
The SSRA1 anchors withstand up to 14,500 lbs. of Ultimate Breaking Strength load, exceeding OSHA and ANSI requirements of 5,000 lbs. This incredible strength is due to the patented structural design of the anchor body, which ensures unmatched durability. The SSRA1 was tested for falls in all directions around the anchor point, not just at a down angle like most seam anchors.
Lightweight and Easy Installation: Save Time and Effort
Weighing only 4.5 lbs., the SSRA1 is the world's lightest OSHA 5,000 lb.-certified anchor. Using hand tools, an experienced worker can install an SSRA1 seam anchor in about two minutes and remove it in about one minute. This ease of use reduces downtime and increases efficiency for permanent or temporary installations.
Versatile Compatibility: Fits Over 500 Standing Seam Panel Profiles
The SSRA1's patented, universal-fit design works with over 500 standing seam panel profiles, including T-seams, bulb seams, SnapLok, single lok, double lok, and MR-24 style panels. This versatility ensures that no other anchor fits as many profiles, making the SSRA1 an indispensable tool for roofing contractors or solar installers. It is compatible with various fall protection manufacturer's devices, enhancing its utility across different applications. The SSRA1 anchors fit the 8 most popular seam profiles currently manufactured.
▶ SSRA1 Compatibility Overview
This Panel Compatibility Chart is provided only as a reference for what the SSRA1 will physically mount to. It does not determine the structural integrity of any roof system or seam. It is the Qualified person's responsibility to verify structural suitability in the event of a fall. The SSRA1 fits over 95% of standing seam panels. It is approved only for 22- and 24-gauge steel and is not compatible with aluminum, zinc, copper, or other soft metals. Do not install on curved, tapered, or batten-seam profiles.
▶ Nailstrip Panel Warning
Nailstrip-style panels are approximately 50% compatible. Some seams are too wide at the base, which can allow anchor movement during installation. Treat compatibility lists as guidelines, not guarantees.
▶ Installer Responsibility
It is solely the installer's or specifier's responsibility to confirm SSRA1 suitability for the specific panel and application. The employer and the designated Competent Person are solely responsible for evaluating, determining, and documenting the structural suitability of the supporting structure, including its ability to withstand all loads that may occur during a fall or related event. The manufacturer does not review, verify, or warrant the structural capacity of any building, roof system, or attachment surface and assumes no responsibility for structural assessment, adequacy, or performance under fall-arrest or fall-restraint conditions.
▶ Test Fit Recommendation
Perform a test fit with an RCT seam clamp or SSRA1 anchor well before installation to confirm proper engagement with your exact panel profile.
▶ Set-Screw Options
- Cupped-tip: 22-ga steel—torque to 90 in-lbs
- Nylon-tip: 22/24-ga steel—torque to 180–200 in-lbs
▶ Surface Impact
Minor seam dimpling and paint abrasion may occur. Scratches can be touched up with a matching paint pen.
Enhanced Stability with SSRA2 Adjustable Roof Jack Adapters
The SSRA2 Adjustable Roof Jack Adapters provide a secure platform for 2" x 10" walk boards on standing seam roofs. Adjustable height stabilizer legs ensure steady mounting at various seam heights. The adapters are compatible with over 500 standing seam roof panels and can adjust to fit roofs up to a 12/12 pitch, ensuring versatile usage across different roof types.
The Roof Jack Pro Pack includes the following:
- (8) SSRA1 Seam Anchors featuring a 6061-T6 aluminum body with a universal fit design, 5,000 lbs. certified D-ring, 12 stainless steel cupped tip set screws, 12 stainless steel nylon tip set screws, owner's manuals, and eight 3/16 hex bits.
- (4) SSRA2 Adjustable Roof Jack Adapters.
- (1) Torque Wrench with a 1/4" drive x 3/16" hex bit.
- Limited Lifetime Warranty, ensuring long-term reliability and peace of mind.
For more information on panel compatibility and detailed test reports, visit our Panel Compatibility and Test Report pages.
Cut Sheet | Spec Sheet | SSRA1 Owners Manual | SSRA2 Roof Jack Adapter Instructions
Roof Jack Pro Pack Frequently Asked Questions
What makes the Roof Jack Pro Pack the best value for staging?
This pack is designed for scale. By providing 8 SSRA1 anchors and 4 SSRA2 adapters, it allows a crew to mount 20 feet of walk-boards across multiple seams with a single, non-penetrating kit that preserves the roof's warranty.
Does this kit include everything shown in the unboxing video?
Yes. As shown in our unboxing video above, the Pro Pack arrives as a complete turnkey solution, including the base anchors, the adjustable adapters, and the calibrated micro-torque wrench needed for a code-compliant installation.
How many walk-boards can I mount with this specific pack?
The Roof Jack Pro Pack is configured to mount 20 linear feet of walk-boards. This provides an expansive, level staging area for materials, tools, or solar panel staging on steep-slope roofs.
Can these jacks be adjusted for steep roof pitches?
Yes. The SSRA2 adapters are designed with stabilizer legs and a tilting plate that can adjust to fit roof pitches up to a 12/12 slope, ensuring a perfectly level staging platform on almost any standing seam roof.
Is the SSRA2 adapter compatible with SnapLok or MR-24 seams?
Absolutely. Because the SSRA2 attaches to the universal-fit SSRA1 base, it is compatible with over 500 profiles including SnapLok, MR-24, T-seams, and bulb seams without needing to penetrate the metal panels.
Why is a torque wrench included in this Pro Pack?
Precision is critical for safety and roof integrity. The included 1/4" drive torque wrench ensures that all 96 set screws (12 per anchor) are tightened to the exact specification (90 in-lbs for cupped-tip or 180-200 in-lbs for nylon-tip).
How do I avoid the most common issues with SSRA2 Roof Jack installations?
To ensure a professional and safe staging setup, follow these three critical technical rules:
- 1. Bridge Two Anchors: Always ensure your walk-boards are supported by at least two jack points to distribute the weight load evenly across the seams.
- 2. Hand Tools Only: Never use impact drivers to tighten the set screws. The high speed can strip the threads or crush the roof seam. Always use the provided micro-torque wrench.
- 3. Correct Substrate: Confirm you are installing on 22 or 24-gauge steel. Soft metals like copper or aluminum cannot support the staging loads required for walk-boards.
