Name: Super Anchor Fire Resistant Adjustable Rope Lanyard, 4110-DS
Brand: Super Anchor
SKU: 4110-DS
Price: 216 USD
Availability: InStock

Description
Warranty Information
Reviews

Super Anchor Lanyards and Connectors

Super Anchor Fire Resistant Adjustable Rope Lanyard, 4110-DS

Choose your length at checkout.

4 to 6 ftLengths

7/16 inNystron Rope

AdjustablePositioning

Standard or FRRope Types

SnaphookEnd

ANSI Z359Compliant

Fire ResistantOption

Rope GrabAdjuster

Who Needs This Product

The 4110 is an adjustable rope lanyard for positioning and restraint work. Choose the fire resistant version for hot-work environments. Complete the system with a full-body harness and a rated anchor.

Features

Adjustable length

A rope grab adjuster sets the working length.

Three lengths

4, 5, and 6 foot.

Fire resistant option

A fire resistant rope version for hot work.

7/16 inch Nystron rope

Durable Nystron rope construction.

Snaphook end

Locking snaphook connection.

ANSI Z359

Meets the American National Standard for connecting components.

⚠

This is one component of a personal fall-arrest system. Positioning and restraint lanyards must be rigged so no vertical free fall is possible. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359

American National Standards for connecting components and energy absorbers.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

PositioningAdjustable work positioning.

RestraintTravel restraint at height.

Hot workFire resistant version for welding.

ConstructionGeneral positioning.

How to Use the Adjustable Rope Lanyard

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
Connect. Make the connection and confirm every gate is fully closed and locked.
Verify. Confirm the full system, capacity, and fall clearance.
Use. Work within the rated limits of the system.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
Stitching: pulled, cut, or broken threads.
Gates and locks: proper close and lock function.
Fall indicators: any sign of deployment.
Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	4110-DS4, 4110-DS5, 4110-DS6
Type	Adjustable rope lanyard
Rope	7/16 in Nystron; fire resistant option
Lengths	4, 5, 6 ft
Adjuster	Rope grab
Standards	ANSI Z359; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is the 4110-DS?

The Super Anchor 4110-DS is a fire resistant adjustable rope lanyard in 12 mm Durashield rope with a 4015-M12 integral adjuster rope grab, built for welding and hot work where standard rope would be damaged. Choose 4, 5, or 6 foot lengths. Only trained workers should select, install, and use fall protection equipment for its intended application. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.

For the 4110-DS, what is the fire resistant option?

A fire resistant rope version for welding and hot-work environments. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.

For the 4110-DS, how does it adjust?

A rope grab adjuster sets the working length. See the Technical Specifications on this page for the exact materials, dimensions, and ratings. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.

Why choose the 4110-DS configuration?

The 4110-DS swaps the standard rope for 12 mm Durashield so sparks and slag do not end its service life; it is the positioning lanyard for the same hot-work crews that run heat resistant harnesses. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear. Before every use, confirm the product is compatible with the rest of your fall protection system and that you have adequate fall clearance below the work area.

For the 4110-DS, can I use it for fall arrest?

It is a positioning and restraint lanyard; rig it so no vertical free fall is possible. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Only trained workers should select, install, and use fall protection equipment for its intended application.

For the 4110-DS, what standard does it meet?

ANSI Z359 for connecting components. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

What completes a system with the 4110-DS?

Yes. You also need a full-body harness and a rated anchor. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.

Super Anchor Fire Resistant Adjustable Rope Lanyard, 4110-DS Submittals and Documentation

Lifeline Instruction Manual 2024 (PDF)Use, installation, capacity, and inspection. Heat PPE Spec Sheet (PDF)Material, heat range, and compliance specifications. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

Need Adjustable Rope Lanyards?

Rope type, length, and application affect the setup. Confirm your positioning needs with us and we will help match the right lanyard.

Call 863-703-4522 to talk to a fall protection specialist.

Super Anchor Safety Manufacturer Warranty

Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.

Permanent Anchor Warranty

Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.

See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.

0 Reviews Hide Reviews Show Reviews