Super Anchor All-Pakka Tool Bag Combo, Utility Belt with Tool Bags
The Super Anchor 6400 Tool Bag Combo pairs a padded waist pad and 16 grommet utility belt with All-Pakka tool bags for a complete tool carrying system. It is offered in Gray or high visibility Ultra-Viz, in four waist sizes.
The combo gives roofers and trades a ready-to-wear tool belt and bag set. Choose your color and size at checkout.
Who Needs This Product
The 6400 Tool Bag Combo is a tool carrying system for roofers and trades who want a matched waist pad, utility belt, and tool bags. It is a tool accessory and is not fall protection or a fall-arrest component.
Features
Complete combo
Padded waist pad, 16 grommet utility belt, and All-Pakka tool bags.
Two colors
Gray or high visibility Ultra-Viz.
Four sizes
Small, Large, Long-Large, and X-Large.
16 grommet belt
A grommeted utility belt for accessories.
Padded waist pad
Adds comfort for all-day tool carrying.
Durable construction
Coated polyester All-Pakka bags.
This is one component of a personal fall-arrest system. This is a tool carrying accessory, not fall protection. Do not use the belt or bags as an anchorage or fall-arrest component. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.
Compliance Standards
ANSI Z359
American National Standard for fall protection equipment.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
Typical Applications
How to Use the Tool Bag Combo
Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.
- Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
- Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
- Connect. Make the connection and confirm every gate is fully closed and locked.
- Verify. Confirm the full system, capacity, and fall clearance.
- Use. Work within the rated limits of the system.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.
- Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
- Stitching: pulled, cut, or broken threads.
- Gates and locks: proper close and lock function.
- Fall indicators: any sign of deployment.
- Labels: illegible or missing markings.
Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 6400-G / 6400-U series |
|---|---|
| Type | Utility belt and tool bag combo |
| Belt | 16 grommet utility belt with padded waist pad |
| Colors | Gray or Ultra-Viz |
| Sizes | Small, Large, Long-Large, X-Large |
| Use | Tool accessory, not fall protection |
| Warranty | Super Anchor Safety manufacturer warranty; see Warranty tab |
Frequently Asked Questions
Tool Bag Combo Submittals and Documentation
Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.Related Super Anchor Products
Outfitting a Crew with Tool Systems?
Color and waist size affect fit and visibility. Confirm your crew needs with us and we will help match the right tool bag combo.
Call 863-703-4522 to talk to a fall protection specialist.
Super Anchor Safety Manufacturer Warranty
Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.
Permanent Anchor Warranty
Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.
See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.
