Super Anchor All-Pakka Tool Bag Carrier Full Body Harness
The Super Anchor 6301 Tool Bag Carrier is a full-body fall-arrest harness with a Tri-Lam3 padded frame built to carry All-Pakka tool bags. It combines ANSI Z359.11 fall protection with an integrated tool carrying frame. Offered in five webbing colors and five sizes.
Choose your webbing color and size at checkout. Tool bags are added with the 6351 version or sold separately.
Who Needs This Product
The tool bag carrier is a full-body harness with an integrated tool carrying frame for roofers and trades who need fall protection and tool storage in one unit. Complete the system with a connecting device and a rated anchor.
Features
Tri-Lam3 padded frame
A padded harness frame built to carry All-Pakka tool bags.
Five webbing colors
Blue-Green, Hi-Viz, Red, Silver, and Ultra-Viz.
Five sizes
Small through X-Large.
ANSI Z359.11 harness
A compliant full-body fall-arrest harness.
Rear dorsal D-ring
For fall-arrest connection.
Integrated tool carry
Carries All-Pakka tool bags on the harness frame.
This is a full-body fall-arrest harness with an integrated tool carrier. You also need an energy-absorbing lanyard or self-retracting lifeline and a rated anchorage. Inspect before each use and confirm fall clearance. Run the Fall Protection Calculator below before you tie off.
Compliance Standards
ANSI Z359
American National Standard for fall protection equipment.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
Typical Applications
How to Use the Tool Bag Carrier
Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.
- Inspect. Check webbing, stitching, hardware, and fall indicators before each use.
- Don the harness. Step in, pull it up, and connect the chest and leg buckles.
- Adjust the fit. Snug all straps so the dorsal D-ring sits between the shoulder blades.
- Connect. Attach your lanyard or self-retracting lifeline to the dorsal D-ring.
- Verify clearance. Confirm anchorage, connectors, and fall clearance before working at height.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.
- Webbing: cuts, frays, abrasion, burns, or chemical damage.
- Stitching: pulled, cut, or broken threads.
- Hardware: D-rings and buckles for distortion, cracks, or corrosion.
- Fall indicators: any sign of deployment.
- Labels: illegible or missing markings.
Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 6301-G series |
|---|---|
| Type | Tool bag carrier full-body harness |
| Frame | Tri-Lam3 padded |
| Colors | Blue-Green, Hi-Viz, Red, Silver, Ultra-Viz |
| Sizes | Small, Medium, Large, Long-Large, X-Large |
| Standards | ANSI Z359.11; OSHA 1926.502 |
| Warranty | Super Anchor Safety manufacturer warranty; see Warranty tab |
Frequently Asked Questions
Tool Bag Carrier Submittals and Documentation
Super Anchor 3 D-Ring Harness Manual 2025 (PDF)Harness use, fitting, capacity, and inspection.Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.Related Super Anchor Products
Outfitting a Crew with Tool Bag Carriers?
Webbing color and size affect fit and visibility. Confirm your crew sizes with us and we will help match the right carrier.
Call 863-703-4522 to talk to a fall protection specialist.
Super Anchor Safety Manufacturer Warranty
Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.
Permanent Anchor Warranty
Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.
See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.
