Name: Super Anchor Ultra-Viz Full Body Harness with Tool Bags, 6161
Brand: Super Anchor
SKU: 6161
Price: 616.8 USD
Availability: InStock

Description
Warranty Information
Reviews

Super Anchor Full Body Harnesses

Super Anchor Ultra-Viz Full Body Harness with Tool Bags, 6161

The Super Anchor 6161 Ultra-Viz with tool bags combines an ANSI Class 1 fluorescent green high-visibility full body harness with an integrated tool bag system, so a worker gets maximum visibility, fall protection, and on-body tool storage in one deluxe padded harness.

The 6161 is offered in Medium through X-Large including a Long-Large size and is certified to ANSI Z359.11 for fall arrest.

Super Anchor 6161 Ultra-Viz high visibility full body harness with tool bags

310 lbMax User Weight

ANSI Class 1Hi-Vis Reflective

Tool BagsIntegrated

Dorsal D-RingFall Arrest

Deluxe FramePadded

M to XLSizes

ANSI Z359.11Compliant

FluorescentGreen

Who Needs This Product

The 6161 Ultra-Viz with tool bags is a high-visibility harness for trades that carry tools at height and need to stand out on site. Complete the system with an energy-absorbing lanyard or SRL and a rated anchor.

Features

ANSI Class 1 hi-vis

Fluorescent green reflective material for maximum visibility.

Integrated tool bags

On-body tool storage built into the harness.

Deluxe padded frame

Padded harness frame for all-day comfort.

Dorsal fall-arrest D-ring

Rear D-ring for personal fall arrest.

Long-Large option

Includes a Long-Large size for taller workers.

ANSI Z359.11

Meets the American National Standard for full body harnesses.

⚠

A harness is one part of a personal fall-arrest system. High visibility material supports, but does not replace, required high-visibility apparel. Inspect before each use, use a compatible energy-absorbing lanyard or self-retracting lifeline and a rated anchor, and confirm fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359.11

American National Standard for full-body harnesses.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

RoadworkHigh-visibility fall protection near traffic.

UtilityVisible tie-off with on-body tools.

Site workDay and night visibility on the job.

ConstructionCompliant fall arrest with tool storage.

How to Use Ultra-Viz Tool Bag Harness

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

Inspect. Check all webbing, stitching, hardware, and fall indicators before each use.
Don the harness. Step in, pull it up, and connect the chest and leg buckles.
Adjust the fit. Snug all straps so the dorsal D-ring sits between the shoulder blades.
Connect. Attach your energy-absorbing lanyard or self-retracting lifeline to the dorsal D-ring.
Verify clearance. Confirm anchorage, connectors, and fall clearance before working at height.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

Webbing: cuts, frays, abrasion, burns, chemical damage, or heat glazing.
Stitching: pulled, cut, or broken threads.
Hardware: D-rings, buckles, and keepers for distortion, cracks, corrosion, or sharp edges.
Fall indicators: any sign of deployment or activation.
Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	6161-M/L/LL/X
Manufacturer Part Number	6161 series
Type	Ultra-Viz deluxe full body harness with tool bags
Material	ANSI Class 1 fluorescent green reflective
Tool bags	Integrated
Dorsal D-ring	Rear fall-arrest D-ring
Capacity	310 lb
Sizes	Medium, Large, Long-Large, X-Large
Standards	ANSI Z359.11; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What is the difference between the 6160 and 6161?

The 6161 adds an integrated tool bag system; the 6160 is the no-bags version. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Only trained workers should select, install, and use fall protection equipment for its intended application.

What makes it high visibility?

ANSI Class 1 fluorescent green reflective material. The specifications listed on this page outline the build details you need for your application. Only trained workers should select, install, and use fall protection equipment for its intended application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

What sizes are available?

Medium, Large, Long-Large, and X-Large. Refer to the specification table above for full details on construction, finish, and sizing. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures. Only trained workers should select, install, and use fall protection equipment for its intended application.

What D-rings does it have?

A dorsal rear D-ring for fall arrest. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Only trained workers should select, install, and use fall protection equipment for its intended application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

Is it padded?

Yes, it uses a deluxe padded frame. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site. Store it in a clean, dry place away from heat and chemicals to help preserve its condition between uses.

What standard does it meet?

ANSI Z359.11 for full body harnesses. Confirm each component in the system is compatible and rated for the intended use before connecting to it. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

Do I need a lanyard with this harness?

Yes. You also need an energy-absorbing lanyard or self-retracting lifeline and a rated anchor. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures.

Ultra-Viz Tool Bag Harness Submittals and Documentation

Super Anchor Deluxe Harness Manual (PDF)Use, fitting, capacity, and inspection.Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

Need Hi-Vis Tool Bag Harnesses?

Visibility, tool load, and worker size affect the right harness. Confirm your needs with us and we will help match the right Ultra-Viz harness and connectors.

Call 863-703-4522 to talk to a fall protection specialist.

Super Anchor Safety Manufacturer Warranty

Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.

Permanent Anchor Warranty

Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.

See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.

0 Reviews Hide Reviews Show Reviews