Name: Super Anchor Dielectric Hardware Full Body Harness, DE-6001
Brand: Super Anchor
SKU: DE-6001
Price: 246 USD
Availability: InStock

Description
Warranty Information
Reviews

Super Anchor Full Body Harnesses

Super Anchor Dielectric Hardware Full Body Harness, DE-6001

The Super Anchor Dielectric DE-6001 is a full body harness built with non-conductive dielectric hardware for work near electrical hazards. It pairs a dorsal fall-arrest D-ring with a choice of Hi-Viz or premium Ultra-Viz webbing.

Sizes run Small through 2X-Large. The DE-6001 is certified to ANSI Z359.11 and is built for utility and electrical trades that need to reduce conductive hardware near energized work.

Super Anchor Dielectric DE-6001 full body harness with non-conductive hardware

310 lbMax User Weight

DielectricNon-Conductive Hardware

2Webbing Options

Dorsal D-RingFall Arrest

S to 2XLSize Range

ANSI Z359.11Compliant

Fall IndicatorsIncluded

UtilityElectrical Trades

Who Needs This Product

The Dielectric DE-6001 is a full body harness for utility, line, and electrical trades that need non-conductive hardware near energized work. Complete the system with a compatible connecting device and a rated anchor.

Features

Dielectric hardware

Non-conductive hardware reduces conductive parts near electrical hazards.

Two webbing options

Choose Hi-Viz or premium Ultra-Viz webbing.

Dorsal fall-arrest D-ring

Rear D-ring for personal fall arrest.

Full size range

Small through 2X-Large.

Fall indicators

Visible sign of a fall event during inspection.

ANSI Z359.11

Meets the American National Standard for full body harnesses.

⚠

A harness is one part of a personal fall-arrest system. Dielectric hardware reduces conductive parts but does not make the harness a source of electrical protection; follow your electrical safety program. Inspect before each use, use a compatible energy-absorbing lanyard or SRL and a rated anchor, and confirm fall clearance. Run the Fall Protection Calculator below before you tie off.

Compliance Standards

ANSI Z359.11

American National Standard for full-body harnesses.

OSHA 29 CFR 1926.502

Federal construction fall protection requirements.

Typical Applications

UtilityLine and electrical work at height.

Electrical tradesReduced conductive hardware near energized work.

ConstructionFall arrest near electrical hazards.

MaintenanceUtility service at height.

How to Use Dielectric Harness

Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.

Inspect. Check all webbing, stitching, hardware, and fall indicators before each use.
Don the harness. Step in, pull it up, and connect the chest and leg buckles.
Adjust the fit. Snug all straps so the dorsal D-ring sits between the shoulder blades.
Connect. Attach your energy-absorbing lanyard or self-retracting lifeline to the dorsal D-ring.
Verify clearance. Confirm anchorage, connectors, and fall clearance before working at height.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.

Webbing: cuts, frays, abrasion, burns, or chemical damage.
Stitching: pulled, cut, or broken threads.
Hardware: D-rings, buckles, and keepers for distortion, cracks, corrosion, or sharp edges.
Fall indicators: any sign of deployment.
Labels: illegible or missing markings.

Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.

Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

SKU	DE-6001 series, webbing and size
Manufacturer Part Number	DE-6001-{webbing}{size}
Type	Dielectric full body harness, non-conductive hardware
Webbing	Hi-Viz or Ultra-Viz
Dorsal D-ring	Rear fall-arrest D-ring
Capacity	310 lb
Sizes	Small to 2X-Large
Standards	ANSI Z359.11; OSHA 1926.502
Warranty	Super Anchor Safety manufacturer warranty; see Warranty tab

Frequently Asked Questions

What makes the DE-6001 dielectric?

It uses non-conductive dielectric hardware to reduce conductive parts near electrical hazards. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

What webbing options are there?

Hi-Viz or premium Ultra-Viz. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. Keep the manufacturer instructions with the equipment so anyone using it can reference the approved procedures. Only trained workers should select, install, and use fall protection equipment for its intended application.

What sizes does it come in?

Small, Medium, Large, X-Large, and 2X-Large. See the Technical Specifications on this page for the exact materials, dimensions, and ratings. Only trained workers should select, install, and use fall protection equipment for its intended application. Always inspect the product before each use and take it out of service if you notice any damage, deformation, or excessive wear.

What D-rings does it have?

A dorsal rear D-ring for fall arrest. Confirm each component in the system is compatible and rated for the intended use before connecting to it. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.

Is this electrical protection?

No. Dielectric hardware reduces conductive parts but the harness is not a source of electrical protection; follow your electrical safety program. Make sure the connecting hardware and anchorage suit your application before you attach a lanyard or lifeline. Only trained workers should select, install, and use fall protection equipment for its intended application.

What standard does it meet?

ANSI Z359.11 for full body harnesses. Pair it only with connectors and equipment that are approved for use together so the complete system performs as designed. A qualified person should verify that the installation and the overall system meet the requirements of your specific job site.

Do I need a lanyard with this harness?

Yes. You also need a compatible connecting device and a rated anchor. Confirm each component in the system is compatible and rated for the intended use before connecting to it. For complete protection, pair it with a compatible full body harness, connector, and shock absorbing lanyard or self retracting lifeline.

Dielectric Harness Submittals and Documentation

Super Anchor Deluxe Harness Manual (PDF)Use, fitting, capacity, and inspection.5-Point Harness Sizing Chart (PDF)Size selection based on height and weight. Dielectric Harness Manual (PDF)Use and care for dielectric hardware harnesses. Super Anchor Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.

Related Super Anchor Products

Outfitting a Crew with Harnesses?

Color, size, and webbing affect fit and compliance. Confirm your crew with us and we will help match the right harness and connectors.

Call 863-703-4522 to talk to a fall protection specialist.

Super Anchor Safety Manufacturer Warranty

Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.

Permanent Anchor Warranty

Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.

See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.

0 Reviews Hide Reviews Show Reviews