Super Anchor Ultra-Lite Energy Absorber, Dee-Loop End
The Super Anchor Ultra-Lite energy absorbers are compact ANSI Z359.13 shock packs with a Dee-Loop harness end that mounts inline on the dorsal strap. Choose the 6190 with a captive carabiner, the 6192 with an aluminum twist lock carabiner, or the 6191-Z with an integral 4015-Z fall arrester.
Choose your configuration at checkout.
Who Needs This Product
The Max-Force energy absorbers are shock-absorbing components for personal fall arrest. Choose the configuration that matches your connectors. Complete the system with a full-body harness and a rated anchor.
Features
ANSI Z359.13 certified
Meets the American National Standard for energy absorbers and lanyards.
Force limiting
Deploys in a fall to keep arrest forces within safe limits.
Many configurations
Standard, ultra-lite, and heavy-duty models with various end connectors.
Compact pack
A compact shock pack that mounts inline.
Durable
Built for daily jobsite use.
Connector choice
Snaphook, aluminum, or carabiner end options.
This is one component of a personal fall-arrest system. Confirm the required fall clearance for the deployed absorber before use. Inspect before each use and confirm compatibility, capacity, and fall clearance. Run the Fall Protection Calculator below before you tie off.
Compliance Standards
ANSI Z359
American National Standards for connecting components and energy absorbers.
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
Typical Applications
How to Use the Max-Force Energy Absorber
Follow the Super Anchor Safety instruction manual. The sequence below is an overview only.
- Inspect. Check for wear, cuts, distortion, corrosion, and gate or hardware function before each use.
- Confirm compatibility. Verify the component, harness, and anchor are compatible and rated.
- Connect. Make the connection and confirm every gate is fully closed and locked.
- Verify. Confirm the full system, capacity, and fall clearance.
- Use. Work within the rated limits of the system.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least annually. Remove the product from service for any condition below.
- Webbing or body: cuts, frays, abrasion, burns, corrosion, or distortion.
- Stitching: pulled, cut, or broken threads.
- Gates and locks: proper close and lock function.
- Fall indicators: any sign of deployment.
- Labels: illegible or missing markings.
Retire the anchor immediately after any fall-arrest event, or if any inspection point fails.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 6190, 6192, 6191-Z |
|---|---|
| Type | ANSI Z359.13 energy absorber |
| Function | Deploys to limit fall arrest force |
| Configurations | Dee-Loop harness end; captive carabiner, twist lock carabiner, or fall arrester end |
| Standards | ANSI Z359.13; OSHA 1926.502 |
| Warranty | Super Anchor Safety manufacturer warranty; see Warranty tab |
Frequently Asked Questions
Super Anchor Max-Force Energy Absorber Submittals and Documentation
Energy Absorber Instruction Manual 2025 (PDF)Use, installation, capacity, and inspection. Warranty and Compliance Statement (PDF)Manufacturer warranty and standards compliance.Related Super Anchor Products
Specifying Energy Absorbers?
Connector configuration and fall clearance affect the choice. Confirm your setup with us and we will help match the right Max-Force absorber.
Call 863-703-4522 to talk to a fall protection specialist.
Super Anchor Safety Manufacturer Warranty
Super Anchor Safety (SAS) warrants to the purchaser that all products are free from defect in material and workmanship at the time of shipment. This warranty is limited to product replacement for a period of one (1) year from the date of installation or use by the owner, provided that this period shall not exceed two (2) years from the date of shipment. This warranty only covers defects in material and workmanship. It does not cover conditions resulting from normal wear, neglect, abuse, or accident. This product warranty does not cover oxidation of zinc, dacromet, or powder coatings used on permanent and temporary anchors that results from connector abrasion unless the coating can be shown to be defective at the time of purchase. This warranty is non-transferable. Any unused defective product will be replaced at no charge by returning the product to Super Anchor Safety or to the distributor the product was purchased from.
Permanent Anchor Warranty
Super Anchor Safety warrants to the purchaser that all anchors sold as a permanent fixture with Hot Dip Galvanizing, Stainless Steel, and Thermo-Plastic finishes are fully warranted against failure due to defects in materials or workmanship for a period of five (5) years from the date of initial installation. SAS does not warranty the installation or flashing system used to waterproof the anchors. The SAS factory warranty is void if the product has been modified or has not been used in accordance with SAS specifications and instructions for that product. Anchors that have been removed from service due to re-roofing or remodel of the structure they were originally attached to must be inspected by an SAS factory representative or a competent person before being reinstalled.
See the Super Anchor Warranty and Compliance Statement (PDF) for the full manufacturer document.
