Suspension Trauma Safety Straps, Fire Resistant
The Suspension Trauma Safety Strap was designed to help a worker overcome the potential negative health impacts of suspension trauma (otherwise known as Orthostatic Intolerance). This condition can occur when a person remains suspended at height (after a fall) for even short periods of time. Suspension in a harness may cause blood to pool in the veins of the legs which can result in unconsciousness; if not rescued promptly, serious injury or death may occur.
OSHA compliant. The right accessory keeps the rest of the system working the way 3M designed it.
Who Needs This Product
For crews completing or maintaining a DBI-SALA fall protection system.
Features
Fall Protection Harness accessories
Fall Protection Harness accessories, engineered into this DBI-SALA configuration as standard.
Fast and easy installation
Fast and easy installation, engineered into this DBI-SALA configuration as standard.
Attach to most 3M harnesses
Attach to most 3M harnesses, engineered into this DBI-SALA configuration as standard.
Available in fire-resistant styles
Available in fire-resistant styles, engineered into this DBI-SALA configuration as standard.
For foot level tie-off, use
For foot level tie-off, use 3M DBI-SALA Nano-Lok edge Twin-Leg QuickConnect SelfRetracting Lifeline: Cable, 8 ft. (2.4 m) 3500228.
Technical Specifications
| SKU | 9505712 |
|---|---|
| Connected Safety ID Equipped | No |
| For Use With | Harnesses |
| Product Type | Suspension Trauma Safety Straps - Fire Resistant |
| Weight | 0.3 lb |
| Weight Capacity | 310 lbs. (140 kg) |
| Weight Capacity | 310 lb |
| Warranty | 3M Global Product Warranty against factory defects, one year from first use |
Accessories are part of the system. Use per the 3M instruction manual and inspect on the same schedule as the rest of your fall protection equipment.
Compliance Standards
OSHA 1926.502 and 1910.140
Meets OSHA personal fall protection requirements for construction and general industry.
3M Quality
Designed, tested, and certified by 3M Fall Protection, the successor to Capital Safety and the DBI-SALA legacy.
One-Year Warranty
Covered by the 3M Global Product Warranty against factory defects in workmanship and materials.
Typical Applications
Setup Overview
- Read the 3M instruction manual before first use.
- Inspect all components before each use.
- Install or deploy per the manual for your application.
- Verify system compatibility and clearances.
- Document inspections on a competent person schedule.
Full use instructions ship with the unit; the instruction manual is linked in the documentation section below.
Inspection and Retirement
Inspect before each use, and have a competent person inspect the unit on a documented schedule per the applicable ANSI standard and the 3M manual.
- Hardware: cracks, distortion, corrosion, and loose fasteners.
- Webbing or lifeline: cuts, frays, burns, abrasion, and chemical damage.
- Connectors: gates close and lock; no distortion at either end.
- Labels: present and legible, with the inspection log current.
- Function: smooth operation with no hesitation, per the manual test procedure.
Retirement triggers: any fall arrest event, failed inspection, or damage beyond the limits in the manual.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your SRL or lanyard setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Frequently Asked Questions
DBI-SALA 9505712 Submittals and Documentation
5902486C Suspension Trauma Safety Straps (PDF)3M product documentation. Personal Safety Products Firefighting Notice (PDF)3M notice regarding fluorinated organic compounds.Compatible and Related Products
- DBI-SALA Protecta Temporary Horizontal Lifeline System 1200101. Related DBI-SALA product in this line.
- DBI-SALA Rope Lifeline with Snap Hook 1202754. Related DBI-SALA product in this line.
- DBI-SALA Saflok Carabiner Yellow Zinc 2000112. Related DBI-SALA product in this line.
Completing Your Fall Protection System?
Confirm your setup with us and we will make sure the right equipment ships together, based on the delivery location.
Call 863-703-4522 to talk to a fall protection specialist.
3M DBI-SALA Global Product Warranty
Unless otherwise provided by local laws, 3M fall protection products are warranted against factory defects in workmanship and materials for a period of one year from the date of installation or first use by the original owner.
Limited Remedy: Upon written notice to 3M, 3M will repair or replace any product determined by 3M to have a factory defect in workmanship or materials. 3M reserves the right to require product be returned to its facility for evaluation of warranty claims. This warranty does not cover product damage due to wear, abuse, misuse, damage in transit, failure to maintain the product or other damage beyond 3M's control. 3M will be the sole judge of product condition and warranty options. This warranty applies only to the original purchaser and is the only warranty applicable to 3M's fall protection products.
Limitation of Liability: To the extent permitted by local laws, 3M is not liable for any indirect, incidental, special or consequential damages including, but not limited to loss of profits, in any way related to the products regardless of the legal theory asserted.
The warranty above is made in lieu of all warranties or conditions, express or implied, including the implied warranties or conditions of merchantability or fitness for a particular purpose. Please contact 3M's customer service department in your region for assistance with warranty claims, or reach out to our team at Fall Protection Distributors, LLC and we will help you start the process.
