FallTech 7088BR FlowTech LTE 3D Belted Harness, Trauma Relief
The FallTech 7088BR is a FlowTech LTE 3D Construction Belted Full Body Harness, Tongue Buckle Leg Adjustment, Suspension Trauma Relief System from the FlowTech LTE family, FallTech's breathable airflow line built around lightweight Flowscape padding, aluminum camlock torso adjusters, and forged aluminum alloy hardware. It is built around 3 D-rings with polyester webbing rated to 3,600 lb min. static strength. An integrated adjustable suspension trauma relief system is built in, letting a suspended worker relieve leg strap tension after a fall while rescue is underway.
It meets ANSI Z359.11-2014 and OSHA 1926.502 and 1910.140. It is available in 4 size options. Every unit ships with the full FallTech documentation package, linked below for your safety submittals.
Who Needs This Product
Crews who need a belted full body harness with 3 D-rings for fall arrest and work positioning in construction and general industry, and who work in heat where a conventional padded harness traps sweat. The FlowTech LTE family is FallTech's breathable airflow answer for this tier of work, and this configuration adds the specific closure and D-ring arrangement listed in the specifications below.
Features
Flowscape breathable padding
Lightweight Flowscape shoulder yoke, sub-pelvic leg, and 7" waist support positioning pads deliver evaporative breathability on hot jobsites.
Dorsal SRL attachment sleeve
The proprietary dorsal attachment sleeve supports effortless addition of personal SRLs without extra carabiners or adapters.
Aluminum camlock torso adjusters
Exclusive aluminum camlock torso adjusters provide simple and secure upper-body fit that holds its adjustment through the shift.
Forged aluminum D-rings
Lightweight forged aluminum alloy dorsal and hip D-rings support fall arrest plus work positioning, rated to 5,000 lb minimum static strength.
Suspension trauma relief system
The integrated adjustable suspension trauma relief system lets a suspended worker take tension off the legs after a fall, freeing blood flow while rescue is underway.
Tool tether connection rings
The waist support pad features paired tool tether connection rings for tools weighing up to 5 lb, keeping hand tools secured at height.
Safety first. A full body harness is only one part of a personal fall arrest system. Verify anchorage strength, connector compatibility, and fall clearance before work begins, and never use a harness that has arrested a fall until a competent person removes it from service. When calculating minimum required fall clearance, the FallTech manual adds 1.5 ft for harness stretch and D-ring shift during arrest.
Compliance Standards
ANSI Z359.11-2014
Meets the ANSI/ASSP standard for full body harnesses, covering design, testing, and marking requirements. Documented in declaration B0216061b in the submittals below.
OSHA 1926.502 and 1910.140
Satisfies OSHA construction and general industry requirements for personal fall arrest system body support.
Applications
How to Use
Donning a full body harness takes less than a minute once the straps are adjusted to your body.
- Inspect first. Check webbing, stitching, D-rings, and buckles for damage before every use. Remove the harness from service if you find cuts, burns, or deformed hardware.
- Don the harness. Hold the dorsal D-ring, shake the harness so the straps fall free, and slip it on like a jacket.
- Close and adjust. Connect the chest and leg closures, then use the aluminum camlock torso adjusters so the dorsal D-ring sits between the shoulder blades.
- Check the fit. You should be able to slide a flat hand, but not a fist, under the leg straps. Tuck loose strap ends into the keepers.
- Connect and verify. Attach your lanyard or SRL to the correct D-ring for the task, and verify anchorage and clearance based on the delivery location of the work.
Inspection and Service Life
OSHA requires personal fall protection to be inspected before each use, and ANSI Z359.11 adds a formal inspection by a competent person at least annually. Log formal inspections so the service history follows the harness.
- Webbing: look for cuts, fraying, abrasion, burns, chemical damage, and UV fading along every strap
- Stitching: check for pulled, broken, or abraded threads, especially at load-bearing junctions
- D-rings and hardware: confirm no cracks, sharp edges, corrosion, or distortion, and that buckles engage positively
- Labels: verify the label pack is present and legible, including the date of first use
- Load indicators: confirm the fall arrest indicator has not deployed
Retire the harness immediately if it has arrested a fall, if any inspection point fails, or if the label is missing or unreadable. Cut the webbing on retired units and destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| Type | Belted Full Body Harness |
|---|---|
| SKU | 7088BR |
| Family | FlowTech LTE |
| D-Rings | 3 (Dorsal, Hip) |
| Closures | Tongue Buckle Legs and Quick-connect Chest |
| Webbing | Polyester; 5,000 lb min. static strength |
| D-Ring Material | Forged aluminum alloy; 5,000 lb min. static strength |
| Buckles and Adjusters | Aluminum alloy and plated alloy steel; 3,372 lb min. static strength |
| Static Strength | 3,600 lb min. |
| ANSI User Capacity | 130 to 310 lb max. |
| OSHA User Capacity | 130 to 425 lb max. |
| Tool Tether Rings | Paired waist pad connection rings rated for tools up to 5 lb |
| Suspension Trauma Relief | Integrated adjustable relief system, deployable by a suspended worker |
| Standards | ANSI Z359.11-2014; OSHA 1926.502 and 1910.140 |
| Available Configurations | 7088BRS (Small), 7088BRM (Medium), 7088BRL (Large), 7088BRXL (XL) |
| Warranty | FallTech 2-year manufacturer warranty, honored through Fall Protection Distributors |
Frequently Asked Questions
Submittals and Documentation
FallTech 7088BR Declaration of ConformityManufacturer declaration B0216061b of conformity to ANSI Z359.11-2014 with supporting test documentationFallTech 7088BR Instruction ManualFull user instructions, inspection criteria, and donning procedure (MFBH04 Rev E)FallTech 7088BR Sizing ChartFallTech harness sizing chart with chest, waist, and thigh measurementsFlowTech LTE Family Brochure (7088BR)FlowTech LTE line brochure with materials, performance, and configuration tablesRelated FallTech Equipment
- FallTech 7088B FlowTech LTE 3D Belted Harness, TB Legs
- FallTech 7086BR FlowTech LTE 1D Harness, Trauma Relief
- FallTech 7083B ComforTech Gel 3D Construction Belted Harness
Pair this harness with compatible FallTech connectors, lanyards, and anchors to build a complete fall protection system with matched components.
Order the FallTech 7088BR Today
Every FallTech product we stock ships fast and arrives with full documentation for your safety file. Not sure which size or configuration fits your crew? Our fall protection specialists size harnesses every day.
Call 863-703-4522 for expert help Specifying the right body wear for your application, or order online now for delivery based on the delivery location.
