FallTech 7232C DuraTech SRL, 30 ft Galvanized Steel Cable (ANSI or CSA)
The FallTech 7232C is a 30 ft DuraTech self-retracting lifeline with a galvanized steel cable and a side-payout aluminum housing for reliable overhead fall arrest. Dual internal inertial brake discs and a load-indicating swivel snap hook deliver smooth, positive lockup and show a fall event.
Choose your certification at checkout: ANSI Z359.14 for US jobsites or CSA Z259.2.2-2017 for Canada. This is an overhead-anchorage SRL and is not rated for leading-edge use. Rated for a single user of 130 to 310 lb combined weight.
Who Needs This Product
This product is a self-retracting lifeline (SRL) with a 30 ft galvanized steel cable for overhead-anchored fall arrest. Maintenance, steel, and industrial crews use the DuraTech cable SRL for long-lifeline overhead protection with rugged all-weather cable. You still need a certified full-body harness and a rated overhead anchorage to complete the system.
Features
Galvanized steel cable
30 ft of galvanized aircraft cable for rugged, all-weather overhead protection.
Side-payout aluminum housing
Lightweight aluminum housing routes the cable cleanly and resists impact.
Dual-disc inertial brake
Two internal brake discs deliver smooth deceleration and positive lockup.
Load-indicating swivel snap hook
Shows a fall event and swivels to prevent cable twist.
Class 1 and 2
Certified Class 1 and 2 to ANSI Z359.14-2021.
ANSI and CSA certified
Select ANSI Z359.14 or CSA Z259.2.2-2017.
Overhead anchorage only, not for leading edges. This DuraTech cable SRL is for overhead-anchored fall arrest and is not designed for leading-edge applications. Anchor overhead, and run the Fall Protection Calculator below to confirm clearance.
Compliance Standards
ANSI Z359.14-2021
American National Standard for self-retracting devices, Class 1 and 2 (model 7232C).
CSA Z259.2.2-2017
Canadian standard for self-retracting devices (model C7232C).
OSHA 29 CFR 1926.502
Federal construction fall protection requirements.
OSHA 29 CFR 1910.140
General industry personal fall protection requirements.
Typical Applications
How to Use the DuraTech 30' Cable SRL
Follow the FallTech instruction manual. The sequence below is an overview only.
- Inspect. Check the lifeline, braking (sharp-pull lock test), housing, energy absorber, and all connectors before each use.
- Anchor. Connect the anchorage end to a rated overhead anchor above the work surface.
- Connect to the harness. Attach the connector to the dorsal D-ring of a certified full-body harness.
- Confirm the connections. Verify every gate is fully closed and locked.
- Verify clearance. Confirm fall clearance and swing-fall below the work surface, and run the calculator below.
Inspection and Retirement
Inspect before each use, with a documented competent-person inspection at least every 6 months. Pull the SRL from service for any of the conditions below.
- Lifeline: cuts, fraying, abrasion, corrosion, kinks, burns, or chemical damage.
- Braking: the lifeline must lock sharply on a quick pull test.
- Housing: cracks, loose fasteners, or a damaged lifeline exit.
- Energy absorber / load indicator: any sign of deployment or activation.
- Connectors and swivels: deformation, corrosion, or gates that fail to lock.
Retire the SRL immediately after any fall-arrest event, or if any inspection point fails. Destroy retired equipment so it cannot return to service.
Fall ProtectionDistributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k).
Technical Specifications
| SKU | 7232C (ANSI) or C7232C (CSA) |
|---|---|
| Type | 30 ft galvanized cable SRL |
| Class | Class 1 and 2 (ANSI Z359.14-2021) |
| Lifeline | Galvanized steel cable, 30 ft |
| Housing | Side-payout aluminum, dual-disc inertial brake |
| Connector | Load-indicating swivel snap hook + anchorage connection |
| Capacity | 130 to 310 lb combined weight |
| Leading edge | No. Overhead anchorage only. |
| Standards | ANSI Z359.14-2021 Class 1 & 2; CSA Z259.2.2-2017; OSHA 1926.502 and 1910.140 |
| Warranty | FallTech 2-year limited warranty against defects in materials and workmanship |
Frequently Asked Questions
FallTech 7232C DuraTech Galvanized Cable SRL Submittals and Documentation
7232C ANSI Instruction Manual (PDF)Use, class, capacity, and inspection (ANSI Z359.14). 7232C ANSI Declaration of Conformity (PDF)Certification to ANSI Z359.14-2021. 7232C Spec Sheet (PDF)One-page specifications and compliance summary. 7232C Canada Catalogue Supplement (PDF)FallTech Canadian product line reference.Related CSA Certified Products
- CSA and Canada Certified fall protection. Browse the full CSA-certified selection.
- FallTech fall protection equipment. See the complete FallTech line.
Specifying SRLs for Your Crew?
SRLs, harnesses, and anchors have to match the work height and the edge. Confirm your application, anchorage, and clearance with us and we will walk through the kit list so the right equipment ships together.
Call 863-703-4522 to talk to a fall protection specialist.
