FallTech 7439A20 ironworker bolt-on D-ring anchor 20-pack for structural steel
FallTech

FallTech 7439A20 Ironworker Bolt-On Anchor, 20-Pack

(No reviews yet) Write a Review
$1,369.00
Brand:
FallTech
SKU:
7439A20
Availability:
Usually ships in 1 business day
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
American Express Icon American Express Icon Discover Icon Discover Icon Mastercard Icon Mastercard Icon PayPal Icon PayPal Icon Visa Icon Visa Icon
FallTech Anchorage Connectors

FallTech 7439A20 Ironworker Bolt-On D-Ring Anchor (20-Pack)

The FallTech 7439A20 is a 20-pack of ironworker bolt-on D-ring anchors with a 13/16 in hole, sized for the bolts ironworkers already carry. Each anchor bolts to structural steel through a single hole for a fast, low-profile tie-off point.

This contractor case pack keeps a crew supplied across a project. Each anchor is certified to ANSI Z359.18-2017, rated for 5,000 lb (22.2 kN), for one worker up to 310 lb (ANSI) or 425 lb (OSHA).

FallTech 7439A20 ironworker bolt-on D-ring anchor 20-pack for structural steel
20-PackContractor Case
5,000 lbsAnchorage Strength (22.2 kN)
Type AANSI Z359.18-2017
1 Worker310 lb ANSI / 425 lb OSHA
13/16 in HoleIronworker Bolt
Bolt-OnSingle Hole
Forged D-RingSteel
Low ProfileFast Install

Who Needs This Product

This product is a 20-count bulk pack of ironworker bolt-on D-ring anchors for structural steel. Ironworkers bolt each anchor through a single 13/16 in hole to create a tie-off point, then connect an SRL or lanyard. Each is a reusable steel anchor. You still need a certified full-body harness and a compatible connecting device.

Features

Bulk 20-count pack

Keeps a crew supplied with tie-off anchors across the project.

Sized for ironworkers

The 13/16 in hole fits the structural bolts ironworkers already use.

Fast single-hole install

Bolt each anchor through one hole for a quick tie-off point.

Forged D-ring

Strong connection point for an SRL or lanyard.

Reusable

Move anchors between connections as the work progresses.

ANSI Z359.18-2017

Each anchor is certified and rated for 5,000 lb (22.2 kN).

⚠

Bolt to sound steel with a rated bolt at the correct torque. Use a properly rated structural bolt through the 13/16 in hole in steel that supports the anchor, set to the specified torque. Confirm fall clearance and swing-fall with the Fall Protection Calculator below.

Compliance Standards

ANSI Z359.18-2017

American National Standard for anchorage connectors. Rated 5,000 lb (22.2 kN).

OSHA 29 CFR 1926.502

Federal construction fall protection anchorage requirements.

OSHA 29 CFR 1910

General industry personal fall protection requirements.

Rated 5,000 lb (22.2 kN)

Anchorage strength for personal fall arrest.

Typical Applications

Steel erectionBulk tie-off anchors for the raising gang.
IronworkFast bolt-on anchors sized for structural bolts.
Industrial steelKeep a case on hand for structural work.
BridgeAnchors across a large steel project.
FabricationStock anchors for shop and field.
MaintenanceReusable bolt-on anchors.

How to Install

Follow the FallTech instruction manual. The sequence below is an overview only.

  1. Inspect. Check the anchor body, connection point, and hardware for damage before each use.
  2. Prepare the structure. Confirm the mounting surface is sound and rated to support the anchor per the manual.
  3. Install and secure. Mount the anchor as specified and set all fasteners to the required torque.
  4. Connect. Attach your SRL or energy-absorbing lanyard to the connection point.
  5. Check clearance. Confirm fall clearance and swing-fall with the calculator below.

Inspection and Retirement

Inspect before each use, with a documented competent-person inspection at least annually. Remove the anchor from service for any of the conditions below.

  • Anchor body and welds: cracks, bending, deformation, or corrosion.
  • D-ring or connection point: deformation, sharp edges, cracks, or corrosion.
  • Fasteners and hardware: damaged threads, loose or missing fasteners.
  • Labels: illegible or missing markings.

Remove the anchor from service immediately after any fall-arrest event, and destroy retired equipment so it cannot return to service.

Fall Protection Distributors logo Fall Protection
Distributors, LLC Free Tool · No Signup · OSHA 1926.502 Free Interactive Tool Fall Protection Calculator Pick your system. Run the math. Generate a plan. 1Pick Your SystemDetermine fall restraint vs. fall arrest based on your work surface, edge access, and clearance. 2Run the MathCalculate exact fall clearance required below the work surface for your lanyard or SRL setup. 3Generate a PlanGet a printable OSHA-compliant Fall Protection Plan structured around 29 CFR 1926.502(k). Run the Numbers and Stay Safe Launch the Calculator ›

Technical Specifications

TypeIronworker bolt-on D-ring anchor, 20-pack
Quantity20 anchors per case
Hole size13/16 in
Anchorage classificationANSI Z359.18-2017
D-ringForged steel
Anchorage strength5,000 lb (22.2 kN)
Capacity (ANSI)One worker, 130 to 310 lb combined
Capacity (OSHA)One worker, up to 425 lb combined
StandardsANSI Z359.18-2017; OSHA 1926.502 and 1910
WarrantyFallTech 2-year limited warranty against defects in materials and workmanship

Frequently Asked Questions

What is in the 7439A20 pack?
Twenty ironworker bolt-on D-ring anchors with a 13/16 in hole, the contractor case pack for a steel crew.
Why the 13/16 in hole?
It fits the structural bolts ironworkers commonly carry, so no special fastener is needed.
Are the anchors reusable?
Yes. Each bolt-on anchor can be moved between connections as the work progresses, per the manual.
What is the rated strength and capacity?
Each anchor is certified to ANSI Z359.18-2017 with 5,000 lb (22.2 kN) strength, for one worker up to 310 lb (ANSI) or 425 lb (OSHA).
Do the bolts come with it?
Confirm contents in the FallTech instruction manual; ironworkers typically use their own rated structural bolts.
What do I connect to it?
Connect a compatible SRL or energy-absorbing lanyard to the connection point, used with a certified full-body harness.
Can it be reused after a fall?
No. Remove the anchor from service immediately after any fall-arrest event and destroy it so it cannot be reused.

FallTech 7439A20 Submittals and Documentation

7439A20 Instruction Manual (PDF)Installation, capacity, and inspection. 7439A20 Declaration of Conformity (PDF)Certification to ANSI Z359.18-2017 (FallTech test lab). 7439A20 Spec Sheet (PDF)One-page specifications summary.

Related Anchors

Specifying Anchors for Your Crew?

The anchor, the connecting device, and the harness all have to match the structure and the fall clearance below. Confirm your application with us and we will help you choose the right anchor.

Call 863-703-4522 to talk to a fall protection specialist.

FallTech provides a 2-year limited warranty against defects in materials and workmanship on the FallTech product. The warranty is void if the product is altered, misused, or damaged by neglect, abuse, or accident, and it excludes normal wear. Fall Protection Distributors, LLC passes through the manufacturer warranty and is not liable beyond the product replacement it provides.
0 Reviews Hide Reviews Show Reviews

About FallTech

FallTech is a well-known brand that provides reliable fall protection solutions. Based in Compton, CA, it is committed to maintaining every product's highest safety and quality standards. FallTech is an accredited manufacturer under ISO 9001:2015 and has an in-house test lab accredited under ISO 17025, which ensures that every product undergoes rigorous testing to comply with ANSI, C.S.A., and OSHA standards. Their product range includes full-body harnesses, shock-absorbing lanyards, anchors, and self-retracting lifelines (S.R.L.s), all designed and built in the U.S.A. to minimize exposure to fall arrest forces. FallTech is a brand dedicated to saving lives through superior fall protection engineering and uncompromising quality. One of their core values is to "never overpromise, yet always overdeliver." Many customers ask for FallTech products by name, and substitutions are prohibited. The brand has a reputation for providing comprehensive fall protection solutions that meet the highest safety standards and is committed to delivering on its promises.

Related Products

!